SPL REPAIR TO BLDG NO P-5 AND P-6 SIGNAL COMPANY, ADDN/ ALTN OF LADIES TOILET AT HARBAKSH STADIUM AND 01 MINOR WORK AT P-4 TIGRIS ROAD UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size exc. 1.5 Sqm but n. exc. 4.00 Sqm each complete all as specified and directed.

Taking up or down 15 mm mm bore steel tubing and connections from any position etc including cleaning for refixing or removal to store complete all as specified.

Taking up or down 20 mm mm bore steel tubing and connections from any position etc including cleaning for refixing or removal to store complete all as specified.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of Brickwork but built in Cement Mortar complete all as speicified and directed

Dismantling of mild steel work of any description and in any position complete all as specified and directed

M&l Brick work with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius, built in C:M 1:4 complete all as specified and directed built in Cement Mortatr including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed .

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge.

S & F for wall cladding tiles of size 300mm x 600mmx 8-12mm thick on vertical surfaces of wall , such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick screed bed in CM 1:4 and as per sample approved by GE complete all as specified and as directed.

S&F 15mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs, and etc complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but n exc 20 cm girth

S&F 20 mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and directed.

M&L for 25mm thick cement concrete 1:4:8 type D-2 using 20mm graded stone aggregate as in sub base complete all as specified and directed.

M&L Virified Ceramic tiles double charge homogenous in light shade /dark shade 15 mm thick (square/rectangular) polished) , area of each tiles 2400 x800mm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed

All as per item No 17 as in in skirting and dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including dimantling of exisitng including cement mortar bedding but not backing complete.

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, such as skirting, dados , verticale surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 including dismantling of exisiting including cement mortar bedding but not backing complete.

M &L Glazed ceramic tiles in vertical surface 600x300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 cm thick rendering in CM 1:4 complete all as specified inclduing dismantling of the exisitng including cement mortar bedding but not backing complete.

M&L Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match above 15mm thick screed bed in C:M 1:6 as in floor finishes complete inclduing disamntling of the exisitng including cement mortar bedding but not backing complete.

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, steps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required complete all as specified and directed.

M&L for 75 mm thick in Plain cement concrete type C2 (1:3:6) (using 40 mm graded aggregate) as in plinth protection and sub base laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment over and including 50mm sand bed complete all as specified and directed.

M&L for Pre Polished Cement Chequered Concrete Outdoor tiles 300x300 x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over screed bed or bedding layer of 15mm thick in CM 1:6 complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.

S&F mild steel butt hinges medium weight cold rolled of size 100 mm and fixed to shutters. complete all as specified and as directed.

S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Factory made single extruded WPC solid door/window ceosetry winodws and other frames chowkhat of size 65x125 cpmprisingn of virgin PVC polymer of K value 58-60 suspension grade calcium carbonate and natural fibre wood powder/ rice husk/ wheat husk and non toxic additives (maximun toxicity index of 12 for 100gms fabricated with miter joints aftr applying PVC colvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl steenght of 2200 N FACE and 1100 N Edge minimum compressive strength of 58 N/mm2 modules of elasticity 900 n/mm2 and resisitance to spread of flames of class A category with property of being termite/borer proof water/ moisture proof and fire retardant

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain type fly proof wire mess door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges, necessary S.S screws ad wire mess shall be paid separately)

S&F steel butt hinges Stainless steel medium weight cold rolled of size 100 mm and fixed to shutters complete all as specified and as directed.

S & F 150 mm size stainless steel, handles complete all as specified and directed

S & F 150 mm size stainless steel barrel tower bolts and fixed complete all as specified and directed.

S & F 250 mm size ALDROPS (sliding door bolts) stainless steel 1.6x25cm (16x250mm) complete all as specified and as directed. (Make : - Godrej product Code SS ALDROPS -2282 and make as per approved make list and as approved by GE).

S & F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all specified and directed.

S&F stainless steel wire cloth power coating 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

M & L for steel windows fabricated from roll formed sections made of galvanized steel colour coated powder coated (Base steel as per IS-513 D quality galvanized as IS 277 with zinc coating of 120 GSM with total coated thickness of 0.60mm. The coated section shall be with primer coated of primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60microns thick with the following specifications :- (a) Main frame 72mm x 55mmx0.58mm (b) Mullion 72mmx50mm x0.58mm (c) Glazed /guazed shutter frame 47mmx20.20mmx0.58mm (d) Glass beads size 12mmx12mmx0.58mm Accessories. Each shutter shall be provided with the following fittings :- (i) Stainless steel pipe of hinges 01 set (ii) Aluminium powder coated handle-04 Nos . (iii) Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass . (iv) Wire Mesh –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperture 1.40mm. (v) Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate. Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw. Note: The glazed/Guaged shutter including guard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. Rate of Wiremesh and glass is included in the quoted rate.Make- NCL or equivalent as approved by GE.

S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, hinges, handles, 5.5 mm glass and wire mesh for panels complete all as specified and as directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. ( Glass/ ACP paneel/ partical board paid separately)

S&F 12 mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with aluminium partition, door cupboad etc complete all as specified and directed

S & F anodised aluminium door shutters, poweder coating of any colour aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Dismantling existing water tanks of capacity exc.500 ltr & n. exc 1000 ltr any type and any position and removing to store complete all as specified.

S & F rotational moulded polythene, water storage tank Triple Layered 1000 Ltrs capacity, closed top, cylindrical, hoisted and fixed in position complete all as specified and dirtected by Engr-in-Charge .

S & F 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed minimum weight -210gms, complete all as specified and as directed.

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S & F 100 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed (Note : Pipe work executed in shaft area upto the 10 story building) (Note : The work will be executed at High rise bldgs and necessary T&P, scaffolding is deemed included in unit quoted rate).

S & F 110 mm PVC (SWR) bends etc completed all as specified and directed

S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door etc completed all as specified and directed

S & F 75 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door etc completed all as specified and directed

S & F 75 mm PVC (SWR) bends etc completed all as specified and directed

S & F 110 mm dia PVC cowls

S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge .

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern inclduing flush pipe white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S & F in repairs 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. (Make: Jaquar Cat Part No CON-CHR-047KN or equivalent in Marc/ Kohler)

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make: Jaquar Cat Part No CON-CHR-167KNB or equivalent in Marc/ Kohler)

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. ( Make : Jaquar Continental CON-CHR-273KNUPR or equivalent in Hindware/Cera)

S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 or equivalent in Marc / Kohler )

S & F in repair Vitreous china full pedestal pattern wall hung wash hand basin with pedestal , size of basin Size: 560x415x200 mm as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed. (Make : Jaquar Continental Series Cat part No. CNS-WHT-801 or equivalent in Marc/ Kohler)

S & F in reapir CP shower brass rose fancy type 200 mm x 200 mm size with 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make: Jaquar Cat Part No OHS-CHR-35497 or equivalent in Marc/ Kohler)

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.

S & F in repair SS soap dish complete all as specified and as directed. (Make: Jaquar Cat Part No ACN-CHR-1131N or equivalent in Marc/ Kohler)

S & F in repair Stainless steel Grating dome 125mm dia with or without hole for waste pipe complete all as specified and as directed.

S & F in repair CP Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. (Make: Jaquar Cat Part No ACN-CHR-1121BN or equivalent in Marc/ Kohler)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar Cat Part No ACN-CHR-111SM or equivalent in Marc/ Kohler)

Dismantling/ taking out of existing roof tretment with APP membrane of any thickness including taking out existing sreed bed and mudphaska upto exisitng depth with all necessary arrangements complete all as specified and as directed.

M&L providing and applying the plaster with single component ready to use polymer modified repair mortar capable of applying 20 mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight modified cementious bond coat @ 2.2 kg cement/Sqm of surface area complete all as specified and as directed. (Make:- Asian Paints (Smart care) or equivalent in Sika, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. (Make: Smart Care Damp Proof of Asian Paints or equivalent in STP/ FDSROC/ SIKA). Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M&L for PCC 1:2:4 type B -1 (using 20mm graded crushed stone agregate) as in roof slope, roof kerbs and required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 2nd floor here required to match the existing surfaces rounded orchamfered on edges complete all as specified and directed.

Dismantling plain/ corrugated cement asbestos roof sheeting, any gauge, thickness, including , Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings.

S & F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall in any shape and curved), fixed with self tapping screws complete all as specified and as directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for preparation of old distempered surfaces of walls, pillers,ceiling cornices etc by scrapping down smoke soot, moulds, moss, efflorescent salts , trading oil and greasy spots and including cracks/holes in surface filling with white putty and applying two coat of oil bound distemper complete all as specified and directed.

M & L for preparation of new surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, ceiling cornices by brooming down etc and applying a layer of 2mm thick wall care putty to prepare the surface even & smooth using sand paper and applying two coats of Oil Bound Distemper over a coat of interior primer using roller brush complete all as specified and directed.

M & L for preparation of new surface/ Old Surface decorated brick/concrete/ plastered or unplastered surfaces of walls, ceiling,pillars, cornices by brooming down etc and applying two coat of cement base paint complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes, drain etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed by Engr-in- Charge.

Frame work such as grills, gratings, etc with ends of bars shouldered or forged into spikes; frame guard bars; barred iron doors; ladders; framed balusters ; walk ways; railings ; frame work of water tanks; frame work for truss and connected parts and other similar work conforming to FE-290 GDE-E-164

Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed

Demolition and breaking up 150 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar and removal of debris out side from MoD land complete all as specified and as directed.

S&F DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

M&L for concrete bed to drain pipe including packing under and haunching against the side of pipes, 150mm bore, in cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) after laying and testing of pipe complete all as specified and directed.

M&L for pre-cast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manholes cover, drain cover and set in cement mortar (1:4) including form work complete all as specified & directed.

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed.

Providing and fixing Brand factory made WPC 24mm thick railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3"x3" GI 'L' or SS cleats to support vertical frame lengths including demolition /dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Rajshree or equivalent as approved by GE) (Note : The said item shall be fixed for view cutter in any positions as requirement at site) WPC Frame to be Measured Seperately

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 75x50mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for followings :- (i) Removing plaster & finishes from all exposed / damaged portion of facia, roof projection, parapet, chajjas , over hanging slabs, columns, slabs ceiling & beams (ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible) (iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed and cleaning all around. (iv) Cleaning exposed concrete substrate by using water jet. (v) Removing visible rust along the length of reinforcement using hand tools as approved. (The Engr-in-charge may order sand blasting if rust is approved) (vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed. Note :- This item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.)

M&L for providing rust proof /anti corrosive treatment to bars:- (i) Apply a single coat of Alkaline rust converting primer on alround bars new & old as recommended by the manufactuer (iii) Apply two coats of polymer modified anti corrosive cementitious coating with a total thickness of 2mm coat on bars alround new & old as recommended by the manufactuer. Note : Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating. Note :- This Item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.)

M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust. (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine or suitable brushes & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of atleast strength equivalent of M-40 concrete of average 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed. Note :- This Item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.)

Construction of soakage well 2.40m internal dia and 3.00m effective depth including excavation in any type of soil,returning filling & removal , PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in footing brick honey comb/ solid brick masonry in cement 1:4, RCC (M-25 design mix) including TMT steel reinforcement in slab including mainhole cover , filled with brick bats including intercepting chamber screen chamber and disposal of soil, complete all as specified. Note : 1. During excavation if unexpected water is encountered, the same shall be bailed out / de-watered by the contractor mechanically or manually without any extra cost. 2. The excavated surplus soil shall be removed to a distance exceeding 50 mtr and not exceeding 100 mtr and deposited where directed by the Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below or above ground level.

M & L for 75 mmm thick PCC 1:3:6 Type C2 40mm graded aggregate as in sub base , sub floor and pavings etc complete all as specified.

M&L for Vitrified coloured Non Skid matt ceramic tiles shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 inclduing dismantling of existing including cement mortar bedding but not backing complete.

M&L for Vitrified coloured ceramic tiles with highlighter concept in matching pattern of size exc 0.42 sqm and n exc 0.80 sqm as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 10 mm thick rendring in CM (1:4) including dismantling of wall tiling including cement mortar bedding but not backing complete.

S&F Anodised Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. minimum thickness of powder coating 50 micron complete all as specified

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars or fixed type , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including glass and wiremesh complete all as specified

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar cat part No. SLS WHT 6851S300PP or equivalent in Hindware/Parryware or equivalent make as per approved make list).

S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDHMR board, both side laminated and front side melamine surface , Size of Vanity box 32 inch upto 36 inch including Wash hand basin with brass waste coupling. (Design, colour and patern as approved by GE) (Make : Hindware / Cera/ Bathsense of Asian Paint)

S& F in repair Toilet paper holder Chromium plated brass fancy type complete all as specified and as directed by Engineer-in-Charge

S&F in repair 15mm bore angle valve CP Brass (Make:- Jaqare Cat Part No 059KN or equivalent in Marc/Kohler)

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in or equivalent in Marc/Kohler)

M&L for 75mm dia of outlet PVC (SWR) floor trap plain with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including jointing with solvent cement complete all as specified and directed.

M & L for preparation of old/new plastered surfaces of from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of interior primer over already prepared surfaces of walls and applying 2mm thick wall care putty as required on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander etc and providing two coat of 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre, over a coat of interior primer of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed by Engineer-in-Charge.

M & L for preparatiob of old/new decorated external Plastered/unplastered surfaces of walls, pillers, cornices etc by scrapping down smoke soot, moulds, moss, efflorescent salts , trading oil and greasy spots and including cracks/holes in surface filling with white putty and applying a layer of 2mm thick wall care putty, again sand papering thus making surface even & smooth and applying two coats of weather proof exterior acrylic emulsion paint premium quality including priming coat of exterior primer and Allow 6-8hrs to dry the surface for painting of subsequent quotes complete all as specified and as directed

M&L for repairing of spalled concrete from rcc surfaces such as ceiling,beam, column, parapet, chajja etc in the following stages (i) Preparation of exisitng surfaces like chipping of unsound weak/loose concrete with electric hammer/manually including tapping all edges, making square shoulders of cavity etc not exceeding 50mm thickness , removal of debris complete all as specifiedRemoving plaster & finishes from all exposed / damaged portion of facia, roof projection, parapet, chajjas , over hanging slabs, columns, slabs & beams. (II) Applying rust remover cum passivator sikka rust top 100 or equivalent at the rate of 0.2kg/sqm each coat as per manufacturer instructiosn to remove rust from exisitng reinforcementRemoving visible rust along the length of reinforcement using hand tools as approved. (iii) Mixing and applying two components epoxy reisn concrete bonding coat of sikkadur(R&B)42 or equivalent at the rate of 0.4kg/sqm (mixinbg prooprtion as per manufacturer instrucuion including preparation of surface by chipping and throughly cleaning of surfaces complete whether required over new reinforcement and as directed by engineer in charge the reinforcement shalll be measured seperaterly. (iv) Applying a prebatched one component polymer modiifed cementitous patch repair mortar not excedding 50 mm in layer of 15mm thick each of product sikka monotop 122 F or equivalent as per manufaacturer instruction to match the exisiting surface Note :- This item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.)

M & L for brick work with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified.

M&L Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

M&L Factory made Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

300 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Providing and fixing factory made uPVC white colour frame 60 mm x 58 mm for fixed glass window/ opennings etc , made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, including glazing bead 35 mm x 20 mm all, including fixing with three track three panel door also etc as complete and as directed,( Note :- Glass shall be paid separately).

S&F 8 mm thick Toughned glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed

M&L Pressed steel frames for doors 125X65MM with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, over a coat of primer complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including dismantling of the exisitng steel complete all as specified and directed

M&L 12 mm thick white colour GRG (Glass Fibre Reinforced Gypsum) Semi Perforated false Ceiling Tiles, Micro Tegular & Tegular edged, Size 595mm X 595mm, Fire Resistance BS-476-4:1970 (Certified), Humidity Resistance (RH) (Certified),including necessary GI frame/ GI T , cross , wall angle etc false ceiling grid (Ceiling Suspension System) in High Quality Zinc Coated Galvanized Iron with Pre Painted Hot Pressed White G I Coil. including centre to centre Hangers 6 mm dia. G.I. rod fully threaded (upto 1000mm long) fixed to roof slabs with galvanised M-6 desh fastener 50 mm long including galvanised MS L-type level adjuster 85 x 25 x 25 x 2 mm etc including taking down on existing ceiling completed all as specified and directed. (Make : - Diamond ceiling and equivalent as approved by GE)

M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.

M&L WPC decorative wall panels/louvers 15 to 25 mm thick design patern wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and makinggood disturbed surfaces of walls, floors, etc all as specified and as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow and 1.5Sqmm FRLS PVC insulated unsheathed copper conductor mulistranded earth wire, connecting to common earth dolly including MS Box, 3mm thick plastic laminated sheet, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light / bell / fan point controlled by one way switch.

All as per srl item No 131 here-in-before but with 1.5 sq mm FRLS copper wire for one socket outet point 5 amps on the same board..

All as per srl item No 131 here-in-before but with 1.5 sq mm FRLS copper wire for one socket outet point 5 amps on the independent board..

All as per srl item No 131 here-in-before but with 4 sq mm wire FRLS copper wire for 15 Amp power point.

S & F in replacement switch piano, flush type, single pole one way 5/6Amp.

S & F in replacement socket, 2 in 1, 5/6A flush type.

S & F in replacement socket 3 pin 5/16A, 5 in 1 flush type.

S & F in replacement switch piano, flush type, single pole one way 15/16Amp.

S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S&F in replacement sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia surface PVC conduit rigid non metallic conduit medium grade as per IS with all fittings and one run of 4 Sqmm FRLS PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement sub main wiring with 2 runs of 6 Sqmm FRLS, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 20 mm dia surface PVC conduit rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm FRLS, PVC insulated copper conductor including cutting chases and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

Supply and fixing in replacement lamp holder PVC/ polycarbonate type suitable for batten fittings complete all as directed.

Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light (6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light (6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

Supply, fixing and connecting in replacement recessed mounting back- lit LED 2X2, 36 watt tile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595x595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

S & F in replacement Fan regulator step type, 120 watts, 2 Module size complete all as directed.

Supply and fixing in repair of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

Taking down Exhaust fan / Wall fan, sealing cable end dismantling blades and removing fan and blades to deposited to MES store yard complete

Taking down ceiling fan sealing cable end dismantling blades and removing fan and blades and refixing it to fan point complete.

S & F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in street light fitting bracket, 01 mtr long made out of galvanized iron pipe of 32mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, complete all as directed.

Supply and fixing of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amp, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections complete all as specified and as directed.

Supply and fixing in replacement of MCCB 3 pole ,415 V Adjustable type 125Amp with breaking capacity 16KA. complete all as specified and as directed.

S&F in replacement of MCB DB conforming to IP 43 - IK 09 with double door, SPN 08 way, double door complete all as directed.

Supply and fixing in replacement of MCB 'B ' Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

S&F in replacement of Isolator SPN 40 Amp , 230 Volt ,all connections complete all as specified and as directed.

M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mm bore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

Supply and fixing exhaust fan 300 mm sweep metalic body type and making all electric connections complete all as directed for new ventilation opening.

Supply and fixing exhaust fan 450 mm sweep metalic body type and making all electric connections complete all as directed for new ventilation opening.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow and 1.5Sqmm FRLS PVC insulated unsheathed copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light / bell / fan point controlled by one way switch.

All as per srl item No 160 here-in-before but for one socket outet point 5 amps on the same board.

All as per srl item No 160 here-in-before but for one socket outet point 5 amps on the independent board.

All as per srl item No 160 here-in-before but with 2.5 sqmm for 15 Amp power point.

S & F in replacement Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S & F in replacement modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F in replacement modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as directed.

S & F in replacement Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

M & L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sqmm 2 Core specified and directed at site by Engineer-in-Charge.

S&F Geyser 25 litre capacity vertical type with steel tank and glass inner linen, 5 star rating complete including fastners (4 Nos) for hanging all accessories such as safety valve, thermostat, NRV, inlet & outlet 304 grade stainless steel connection pipe with SS nut including taking down old Geyser and depositing the same in MES store yard complete all as specifed and as directed.

S&F 5mm thick sheet glass, ordinary quality and glazed fixed complete all as specified and as directed by Engr-in-Charge.

S&F anodised aluminium grill (anodised transparant or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handless and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engr-in-Charge.

Akhil Enterprises (BID ID -3274395)

Vipul Construction (BID ID -3274404)