REPAIR MAINT TO FIRING RANGE AREA BRICK WORK COMPOUND WALL GATES GATE PILLARS PCC COPING HARDSTANDING AND OTHER MISC BR WORKS UNDER AGE B R EAST

Amount

Surface excvation not exceeding 30 cm deep and averaging 15 cm deep slope or an inclined angle of 60 degree upward direction and getting out including loosening of sand/soil and removal of grass from roots and picking up stones or brick bats or any other hard material and removal of waste material to a distance of n.exc 500 mtrs, complete all as specified and directed.

Taking out sand and saw dust from drain or low lying area or from the side walls and spreading the same over the 'BUTTS' upto to a depth of 60 cm to required slope or an inclined angle of 60 degree upward direction upto a distance of 150 mtrs, complete all as specified and directed. Note:- (i) The rates includes for mixing and spreading of Sand and saw dust in proporation 1:1 and laid in slopes or an inclined angle of 60 degree upward direction and necessary consolidation / compaction, complete all as directed by Engr-in charge.

Supply and fixing of boarding 40 mm thick 2nd class hard wood in any position fixed with nails and incl dismantling old boarding boarding of any section any description fixed with nails, complete all as specified and directed.

Dismantling of scantlings of section 40 sqcm and over in section in any position unframed work, complete all as specified and directed.

Material and labour for clean sawn in 2nd class Soft wood scantling, complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote, complete all as specified and directed.

Dismantaling of structural steel work incl doors, gates but excluding framed trusses etc, complete all as specified and directed.

Supply and fixing MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complet of Fe-290, Gde-E-165, complete all as specified and directed.

Supply and fixing welded steel wire fabric n exc 4 kg/Sqm fixed to wood or steel members, complete all as specified and directed.

Supply and fixing in repair galvanised two strand steel barbed wire 2.24 mm dia barbed wire with 2 mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire staples or steel pins etc as directed (each line wire to be measured), complete all as specified and directed.

Restraining and resecuring barbed wire including making good staples etc (each line wire to be measured), complete all as specified and directed.

Supply and fixing in repair concertina coil of 610mm dia (in stretched position) hot deep galvanised steel wire coated with CLR ante corrosive coating making diamond shape with the help of devotail clips (18 SWG) fixed over barbed with the angle iron the concertina coil is to be fixed with barbed wire at points where coil touched the bottom barbed wire with the help of hog rings (14 SWG), complete all as specified and directed.

Demolition of brick work / stone masonry/PCC block built in cement mortar of any description, complete all as specified and directed.

Material and labour for walling of random rubble, uncoursed, Bangalore type masonry well bonded bedded solidly hearted built in CM 1:6, complete all as specified and directed.

All as per item No (14) above but except stones, complete all as specified and directed.

Material and labour pre-cast PCC 1:3:6 type C1 (using 20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6, complete all as specified and directed.

Material and labour for River sand and saw dust mixed in volumetric proporation 1:1 including laying and spreading upto a maximum depth of 60 cm on slope or an inclined angle of 60 degree upward direction upto a distance of 50 mtrs complete all as specified and directed. Note:- (i) The rates includes for mixing and spreading of Sand and saw dust in proporation 1:1 and laid in slopes or an inclined angle of 60 degree upward direction and necessary consolidation / compaction complete all as directed by Engr-in charge.

Taking out of broken glass from top of walls and removing the rubbish to a distance not less than 100 m and deposited where directed, complete all as specified and directed.

Material and labour for broken glass coping 25mm thick on top of walls in cement mortar 1:3, complete all as specified and directed.

Taking down cement plaster of any description incl raking out joints, haking for key, scrubbing down with water, etc, complete all as specified and directed.

Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement, complete all as specified and directed. Note: (a) Water proofing compound shall be measured and paid seperately.

Supply only integral liquid water proofing compound, complete all as specified and directed. Make ;- Dr. Fixit pidi proof and equivalent.

Machine cut kudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing including 15mm thick screed bed in CM 1.4, complete all as specified and directed.

Dismantling posts or struts (wood, steel, or RCC) any section, including taking out embedded portion in concrete, brick work, masonry etc, complete all as specified and directed.

Supply and fixing of MS fencing posts/struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Material and labour for Cement Concrete 1:3:6 type C2 (using 40 mm graded crushed stone agg as in fdn of posts, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Dismantling fencing wire mesh of any type, complete all as specified and directed.

Supply only Chain link MS galvanised wise fencing any size or type, complete all as specified and directed.

Fixing only Chain link fencing including line wires any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wires, complete all as specified and directed.

Supply and fixing Flat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0, complete all as specified and directed.

Supply and fixing Mild steel screw bolts (machine made) 16 to 20 mm diameter of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long and n exc 10 cm long and all as specified and directed.

Supply and fixing MS round bars/strengthening bar 10mm dia & over cut to length bent to shape required incl cranking bending spirally securing with clips or fixed with suitable arrangement in fencing mesh, quality confirming to Fe-410W(grade E-250)Quality A or Fe 290 (gde-E-165), complete all as specified and directed.

Demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for Providing 50mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor of SWT surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for broken stone or boulders, hardcore of gauge n. exc. 63 mm , deposited, spread and levelled in layers n. exc. 100cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finishing the surface even and smooth without using extra cement , complete all as specified and directed.

75mm thick plain cement concrete type C1 (1:3:6), using 20 mm graded crushed stone aggregate, as in path / plinth protection/paving laid in slope in 1:30 in panels n exc 2m long, concrete surfaces finished even and smooth without using extra cement including making joints between panel to panel and filling the same with bitumen mastic filling bitumen & sand mixture in a ratio 1:3, complete all as specified and directed by the Engineer in Charge.

Material and labour for preparation of new plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified and directed.

Cleaning the Open water drain of average sectional area between 1.70 Sqm by removing the filled earth, debris, plantation etc and removing the same to a distance not exc 50m outside defence land, complete all as specified and directed.

M&L PCC 1:3:6 type C2 as in Surface channel or drains including necessary form works , stops ,moulds etc incl demolition of concrete, complete all as specified and directed.

M&L for providing, cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in kerbs stone, rounded or chamfered on edges, complete all as specified and directed.

M&L for Stone kerb of roughly squared stones of size 15cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush, complete all as specified and directed.

S&F chequered cement concrete tiles 30cmx30cmx25mm thick set jointed and pointed with grey cement and no pigment to match the floor including 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate and including 15mm thick screed bed in CM 1.4, complete all as specified and directed.

Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works, reinforcememt cut to facilitate demolition, complete all as specified and directed.

M & L for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:6 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement, complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqired including cranking, bending spirally for hooping for colimns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description , complete all as specified and directed.

S&F MS tubes/Square bars/Angle squqre bar iron using various sections such as poles, rafters, purlins ladders and cleats as directed by Engineer-in-Charge, complete all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any hieght and including dismantling of plain or corrugated steel sheeting of any gauge, thickness including Nanital or similar pattern roof covering , complete all as specified and directed.

M&L for prepration of new steel surface and iron work of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide , complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver blocks of 60mm thick (M-35 grade) as in flooring of any shape and size(laid in pattern as decided by GE) and filling the joints with fine, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver blocks of 80mm thick (M-40 grade) as in flooring of any shape and size(laid in pattern as decided by GE) and filling the joints with fine sand, complete all as specified and directed.

Material and labour for 50mm thick sand filling under precast interlocking paver blocks and all other similar works, complete all as specified and directed.

Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed, complete all as specified and directed.

Material and labour for keyed pointing in CM 1:4 for squared rubbel masonry, complete all as specified and directed.

Material and labour for preparation of old plastered wall surface and applying one coat of cement based paint, complete all as specified and directed.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of white wash, complete all as specified and directed.

Material and labour for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint of any tint, complete all as specified and directed.

Material and labour for preparation of old external surfaces of walls including cornices, plasters etc(plastered or un plastered surfaces) and applying one coat of exterior emulsion paint complete all as per manufacture instructions, all as specified and as directed. Note :- An amount of Rs 41518.70 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.

LAKSHMI CONSTRUCTIONS

SRI GANESH ENTERPRISES

Maruthi constructions

shashi shekar construction