Repairs/ replacement and maint of storage water heater, solar water heater alongwith allied works at Tibri Mil Stn under GE Gurdaspur.

Amount

Material and labour for maintenance of storage type electric water heater geyser of capacity 25 litre comprising of the following activities:- (a) Inspection, taking down, opening, dismantling , descaling, brushing and cleaning of storage tank and examining of water tightness of storage tank after cleaning and descaling. (b) Check and connect earth continuity of electric items (c) Checking and adjustment of pressure release valves (d) Cleaning and maintainance and refixing thermostat and ensure its functioning (e) Checking of dead weight, cleaning / seal and ensuring vent hole is fuctioning propely (f) Visual examination of fusibie plug. (g) Testing of geyser after repair. (h) Assembling and fixing in same position. Note: S&F of spare parts shall be measured and paid separately under relevant items.

All as item No 1.00 here-in-before above but of 50 litre capacity

Taking down carefully existing unservicable heating element of any type from geyser and supply and fixing new heating element 1.5KW Capacity including necessary element connection as required at site and testing complete all as specified and directed (Note:- Petty item such as nut ,bolt, clamps etc are deemed to be included in quoted unit rate)

Taking down carefully existing unserviceable thermostat and supply and fixing new thermostate ISI marked for geyser any capacity with necessary connection and heatimg complete all as specified and directed

Taking down carefully existing unserviceable indicator lamp and supply and fixing new indicator lamp to geyser of any size, square, round complete all as specified and directed

Supply and fixing in replacement of inner shell of suitable size made of stainless steel sheet of 22 SWG ISI Marked for geyser of any type/Make of 25 litres capacity complete with all suitable accessories such as thermal insulation etc complete all as specified and directed as per sample

Supply and fixing in replacement of inner shell of suitable size made of stainless steel sheet of 22 SWG ISI Marked for geyser of any type/Make of 50 litres capacity complete with all suitable accessories such as thermal insulation etc complete all as specified and directed.

Supply and fixing in replacement of outer cover of geyser capacity 25/35 litres complete all as specified and directed.

Supply and fixing in replacement of outer cover of geyser capacity 50 litres complete all as specified and directed.

Supply and fixing in replacement water heater storage type (Geyser) single phase of capacity 25 ltrs with steel tank, heating element 1.5 KW, thermostat with complete assembly all as specified and ditected. Note: Old geyser shall be deposited at AGE EM store yard.

Supply and fixing in replacement of glass wool for geyser 50 litres capacity complete all as specified and directed.

Supply and fixing in replacement of glass wool for geyser 25 litres capacity complete all as specified and directed.

Taking down existing unserviceable inner base assembly, supply and fix new inner base assembly complete with inlet, outlet, thermostat, pipes with drain plug and screw including clamps for holding the elements, nuts, bolt etc, ISI, Marked for geyser of any type/Make, 25 litres capacity complete all as specified and directed

Taking down existing unserviceable inner base assembly, supply and fix new inner base assembly complete with inlet, outlet, thermostat, pipes with drain plug and screw including clamps tor holding the elements, nuts, bolt etc, ISI, Marked for geyser of any type/Make, 50 litres capacity complete all as specified and directed

Taking down existing unserviceable copper flexible cable 3 core, supply and fix new cable PVC insulated 3 core, copper conductor 2.5 sqmm all as specified and directed .

Taking down existing unserviceable bottom cover plate (two halves) and fix with new bottom cover plate with matching colour of geysers of any type/ Make and capacity complete all as specified and directed.

Taking down existing unserviceable Non return valve and supply and fixing in poisition with new non return valve ISI marked made of cast copper alloy screwed both ends internally suitable for iron pipe of 15mm bore complete all as specified and directed

Taking down existing unserviceable safety pressure valve and supply and fixing new safety pressure valve with vent to geyser as per latest ISI specification complete all as specified and directed.

Supply and fixing in replacement for PVC connection (Hot) of size 15 mm bore and 600mm long superior quality with brass adopter complete for geyser for any capacity

Supply and fixing in replacement of neoprene seal (bottom ring) for 25/35/50 litre capacity geyser of superior quality complete all as specified and directed

M&L for painting the outer surface of geyser of 25 Litres capacity as per original shade with two coats of synthetic enamel paint over one coat of primer by spray gun after scrapping the existing paint, denting, filling depression with putty etc and refixing the geyser in position including water/electric connection and testing, complete all as specified and directed.

All as per srl item No 21.00 here-in-before but for geyser 50 Iitre capacity

M&L for brazing / welding of inner copper tank at leaking spots up to five leakage of geyser of capacity 25/35/50 litres capacity of any type and make of tank after checking up worn out nuts bolts and washers complete all as specified and directed.

Supply and fixing in replacment Gun metal angle valve of 15 mm bore ISI marked complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure (industrial type DB) single pole and neutral including 2 pin earth plug and socket with one MCB SP C Curve type 20 Amp 10 KA complete all as specified and directed.

Material and labour for grouting of nuts & bolts for fixing of 50/25 Iitres capacity geyser on existing wall including cement and sand mortar 1:2 and finishing as per existing complete all as specified and directed.

Supply and fixing in replacement bib tap cast copper alloy chromium plated with crutch or butterfly handle screwed for GI pipe 15 mm bore complete all as specified and directed.

M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt , FRLS cable of size 4.0sqmm including 4.0sqmm multistranded copper conductor FRLS cable PVC insulated for earthing duly connected with earth dolly, with approved colour coding including PVC conduit heavy grade, of appropriate dia. concealed in wall with accessories including cutting chases and making good to the disturbed surfaces as per existing and taking down old unserviceable wiring complete all as specified and directed. Note :- (a) Three run of cable alongwith PVC conduit together shall be measured as single run.

S&F in repair of plug top 3 pin 5 Amp 240 volt all as specified and directed.

S&F in repair of plug top 3 pin 15 Amp 240 volt all as specified and directed.

Disconnacting electrical connection of solar heating device (of Make :- Inter Solar, Sintex, sun magic), carefully, dismantling solar panel with water tube (copper assembly/ ETC tube) rubber gaskiet; nut bolt and servicing/cleanning with acid & water circulation and wire brush and brazing of cooper tube if any, after servicing reassembling the same and testing complete all as specified and directed.

Supply and fixing in replacement of gasket set for ETC tube complete all as specified and directed.

Supply and fixing in replacement of ETC tank nipple gasket complete all as specified and directed.

Supply and fixing in replacement of ETC silicone gasket complete all as specified and directed.

Supply and fixing in replacement of ETC tube holder without cups complete all as specified and directed.

Supply and fixing in replacement of aluminium foil roll self adhesive complete all as specified and directed.

Supply and fixing in replacement 1000 litres capacity, rotational moulded polythelene water storage tanks white ISI marked (cylindrical vertical with closed top), hoisted and fixed in postion complete all as specified and as directed.

Supply and fixing in replacement 500 litres capacity, rotational moulded polythelene water storage tanks white ISI marked (cylindrical vertical with closed top), hoisted and fixed in postion complete all as specified and as directed.

Supply and fixing in replacement of aluminium foil for collector complete all as specified and directed.

Supply and fixing in replacement of rubber gromet (for collector).

Supply and fixing in replacement of MS dead flange as per existing complete all as specified and directed.

Supply and fixing in replacement of gasket/sleeves for collector as per existing complete all as specified and directed.

M&L descaling solar water heater steel tank with chemical all as specified and directed.

Supply and fixing in replacement of brass flange as per existing all as specified and directed.

Supply and fixing in replacement of rubber gasket (blind) as per existing all as specified and directed.

Supply and fixing in replacement of toughened/ tempered glass 4 mm thickness transmissivity more than 85 % as per existing size (for 125/100 Ltrs capacity) all as specified and directed.

Supply and fixing in replacement temperature gauge complete all as specified and directed.

Supply and fixing in replacement of solar collector with water tube for 125/100 litre capacity (copper assembly complate), reassemble the same and testing complete all as specified and directed.

Supply and fixing in replacement of heating element for water heating system 3 KW with rubber gasket of suitable size complete all as specified and directed.

Supply and fixing in replacement of thermostate suitable for solar water heater of any capacity complete all as specified and directed.

Supply and fixing in replacement of sacrificial anode complete all as specified and directed.

M&L in replacement of copper tube in pieces for solar collecter of any size installed at site as per manufacturer design including brazing of copper tubes complete all as specfied and directed.

Supply and fixing in replacement poly Nitrite insulation sleeves 16mm thikness for 20mm bore pipe complete all as specified and directed.

Supply and fixing in replacement gate valve gun metal with iron wheel head, screwed both ends for iron pipe 25mm bore complete all as specified and directed.

Suply and fixing in replacement gate valve gun metal with iron wheel head, screwed both ends for iron pipe 20mm bore complete all as specified and directed.

Supply and fixing solar water heater storage stainless steel tank complete with heat exchanger of capacity 400 litres complete including connection to all accessories such as hot water stainless steel tank, aluminium channel, solar collector plate, GI tubing and GI channel etc, including dismantling existing solar water heater tank with accessories complete all as specified and directed

Supply & laying galvanized steel water tubing, medium grade of 15 mm bore, screwed and socketed joints including all required fittings and fixed complete to wall and ceiling or laid in floor in old and new location, etc including taking up or down existing steel water tubing complete all as specified and directed.

All as per Srl item No 57.00 above but pipe of 20mm bore.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Supply and fix for mild steel work as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, reveting, etc. not exc 10 kg each brackets, conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Supply and fix MCB Protected Socket with sheet steel enclosure SRCD(socket residual current device) single pole with a three pin socket with top complete with 16 Amps MCB single pole.

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

P S BUILDERS

kailu construction co

HARPAL ENGINEERS AND BUILDERS