Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
25 Nov 2026, 6:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
PWD Electrical Division I Jaipur
SITC of LAN,CCTV, IPBAX and other LV Work in State Hanger, Jaipur
2026_CEPWD_605914_2
NIT NO 19 of 2026-27 EE PWD E-I Jaipur
Open Tender
Electrical Works
Percentage
540 days
State Hanger
Please refer tender documents
2 documents required · 2 mandatory
₹2,000
Through Egras Challan in Office ID 4222
₹3.0 L
Yes
In the Chamber of Superintending Engineer
16 Nov 2026
16 Nov 2026
26 Nov 2026
16 Nov 2026
25 Nov 2026
16 Nov 2026
18 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, U/UTP (Unscreened/ Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest amendments of ANSI/TIA/EIA-568, The copper conductors should be balanced twisted in pairs, separated by a cross-member fluted pair divider & protected by LSZH Jacket. Certified performance in a 4-connector configuration up to 100 Mtrs channel requirements & transmission frequencies ranging from 250 to 500 Mhz. in existing MS/PVC Conduits/ casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. | 6,600 | Mtr. | 44 | ₹2,90,400 |
| 1.02 | S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including making jhiri in the wall, clamps at suitable spacing, covering conduit and making good the same as required. | - | - | - | - |
| 1.03 | 20 mm | 300 | Mtr. | 33 | ₹9,900 |
| 1.04 | 25 mm | 5,900 | Mtr. | 47 | ₹2,77,300 |
| 1.05 | 32 mm | 2,200 | Mtr. | 70 | ₹1,54,000 |
| 1.06 | Providing & Fixing of DLP PVC adaptable trunking system for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. OEM have to submit NABL accrediated /CPET lab test reports /EN 50085-2-1 complaince certificate. | - | - | - | - |
| 1.07 | 80mm x 50mm | 200 | Mtr. | 976 | ₹1,95,200 |
| 1.08 | 100/105mm x 50mm | 20 | Mtr. | 1,216 | ₹24,320 |
| 1.09 | Supply and Installation of unshielded/360-degree shielded PCB based Information outlets made of high impact plastic body with ABS, Flammability rating UL 94 V-0 with provision for protection against dust in jack or Faceplate, suitable for Cat 6/6A application complying to latest amendments, according. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat 6/6A standards at frequencies 250/ 500 MHz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have toolless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA 568 C.2 & ISO/IEC 11801 or latest standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM, Digital video and broadband/baseband analog video, Voice over internet protocol (VOIP) Specifications in existing modular/MS Boxes along with necessary connections as required. All as per pre-approved by Engineer in charge. | - | - | - | - |
| 1.1 | Cat 6, Un-shielded Information Outlet | 99 | Each | 287 | ₹28,413 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
Tendernotice_2.pdf
PDF • 2.29 MB
Tendernotice_3.pdf
PDF • 0.22 MB
BOQ_1074693.xls
BOQ • 0.49 MB
Cover2.pdf
Tender Documents • 0.05 MB
02Condition.pdf
Tender Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .