e-Quotation Notice No.17 for 2026-27 Work No.01

Providing, supplying, installing, testing and commissioning of complete Hydro Geyser Water Feature/Fountain system as per approved design/drawing, including SS 304 Hydro Geyser Nozzles – 18 Nos., suitable Submersible Pumps of 5.0 HP – 2 Nos., of approved makes such as Crompton/Kirloskar/CRI for billing, with equivalent approved makes Laxmi/Falcon/Prithvi where applicable; complete electrical system with required 3 & 4 core cables of KEI/Polycab or equivalent, choke, electrical accessories, starters/controllers and all necessary electrical materials; complete UPVC plumbing system using Ashirwad/Plasto or equivalent, including pipes, fittings, valves, fixtures, connectors and all required accessories; including pump connections, nozzle connections, control panel/starter arrangement, supports, clamps, necessary civil/plumbing interfaces, testing, commissioning and balancing of the fountain jets, complete in all respects as per approved drawing/specification and as directed by Engineer-in-Charge. The item shall include all materials, labour, transportation, installation, testing and commissioning required for a complete and functional Hydro Geyser Water Feature.

Supplying installing testing and commissioning of Solar Panel Comprising high efficiency N - TYPE Topcon(ECE/GROW POWER) 335 Wp 24V with necessary clamps an module frame on existing structure complete. Modul Volt(V)=24 No.of cells in series=68 cells size(mm)= 156.75 cell size tolerance±1% Module size (LxWxH) in mm= (1431x1134x35) Voc(V)= 47.88 Isc(A)= 9.31 Pmax (W)=335, Vmp(V)=39.05 Imp(A)=8.71 Module Efficiency (%)=20.7 Electrical tolerance(±%) = 3 Temperature coefficient open circuit voltage(beta)/°C = 0.35%. Temperatur coefficient of short circuit current (alpha)/°C = 0.10%. Temperature coefficient power (gamma)/°C =0.47% Nominal operating cell temperature=47°C ±2°C. operating temperature range from 10°C to 70°C Junction box connecto IP68 Waterproof PPO and MC4.Compatible Modul weight (Kg) =17.

Supplying and erecting DC LED Street light fitting of 24V 100W including with min. efficacy 150 lumen/watt (total system lumens output not less than 15000 lumen @ full intensity) colour temp 5500K-6500K.Colour redering index>70.Output PF>0.95. MPPT charge controller Parameters Are Lights,Solar Pannel and Battery Observe Server efficiency>90% LED drive efficiency >90% Duty cycle first six hours 100%. Res 145X90 degree street light lens class IP66 & IK08 Class. charge controller methodology-thre stage battery charge Monitoring algorithm maximum charging current 20Amps short circuit protection battery over charge protections, battery deep discharge protection, solar panel dusk to dawn operation NTTV-4V DTTV- 6V battery low load disconnect voltage 11.2V battery full load disconnect voltage 13V battery constant voltage set point 14.7V. LED Indication: green off- battery not charging PV low, green on- battery charging, grecn flashing- battery full, Red off- battery not discharge, Red on- Battery discharge load disconnected. overall dimension- 275mm X 175mm X 80mm overall Weight- 1.2Kg. and above housing of pressure dic cast aluminium alloy and heat sink cxtruded aluminum complete. (5 Yrs Warranty) (Non CSR )

Supplying installing testing and commissioning of LiFePO4 battery with capacity of 24V- 100 Ah with 8S-30A BMS. Cell having duty cycle < 3000 suitable to charge lithium cell with necessary wiring connections. With IP 65 alluminium cabinel with stand and nut bolts comptete (Nominal Voltage - 24V. Nominal Capacity - 162Ah. Stored Energy- 2.9Kw. Cycle 0.2C 80%DOD <3000 Charge Voltage - 29.2 charge mode - CCCV. Standard charge current- 18 amp. rapid charge current 22 standard discharge current- 22 max charge current- 22 amp. low' voltage cutoff-21 .2. casing material Alluminium extrusion - Output cable via PG7 gland. charge temp range - 0-55C Discharge temperature range 0- 55 C Storage temp 20- 45C. Weight - 26Kg. (Lifepo4 battery Confirming to IEC 62133 std) (5 Year Warrantee )