Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC C O M S MITHUN ENTERPRISES MINNIEBAY JUNCTION PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.3 L+₹3.0 L (7.54%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹43.4 L+₹3.2 L (7.83%)Rejected-Finance INDUSTRIAL ESTATE DOLLYGUNJ PORT BLAIR 744 103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹44.9 L+₹4.6 L (11.5%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹45.0 L+₹4.7 L (11.7%)Rejected-Finance 290 NEW PLOT JAWAHAR NAGAR JAMMU JAMMU JAMMU KASHMIR 180005 | JAMMU | JAMMU AND KASHMIR | 180005 | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
GE Minniebay Junglighat Post Minniebay Port Blair 744103
WELCOME MAINTENANCE TO OFFICERS MD ACCN AT PERRIERA ENCLAVE, SRINAGAR COLONY AND CERTAIN MISC B/R WORKS UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR
2023_MES_597819_1
8245/E8
Open Tender
Civil Works
Item Rate
270 days
Minniebay Port Blair
As per tender documents
10 documents required · 10 mandatory
₹500
GE Minniebay
₹80,000
Yes
13 Jul 2023
23 May 2023
15 Jun 2023
24 May 2023
13 Jun 2023
7 Jun 2023
Amount
M&L for preparation of old decorated plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.
All as per item No 1.00 above but on ceiling complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.
All as per item No 3.00 above above but as in ceiling complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
M&L for applying a layer of wall care putty of thickness than 1.5mm on wall and making surface even and smoth complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth complete all as specified and as directed by Engineer-in-Charge.
All as per item No 7.00 above but n.exc 10cm width or girth complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M&L for applying one coat of acrylic amulsion weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation complete all as specified and as directed by Engineer-in-Charge.
M & L for cleaning the existing floor / concrete surfaces / path by washing rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI or move for obtaining a clean surfaces free from algae/organic particles and applying one coat of weather resistant floor paint complete all as specified and as directed by Engineer-in-Charge. Note : Register for usage of high pressure wall jet machine shall be maintained and submitted before payment of RAR/FB
M&L for rendering 15mm thick plaster in CM (1:4) on brick/block masonry or concrete surfaces finished even & fair including taking down cement plaster complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 10mm thick plaster in CM (1:6) on brick/block masonry or concrete surfaces finished even & smooth including taking down cement plaster complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of cement based paint over a coat of chalk withing on newly plastered surface of wall including preperation complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of Oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing new steel or iron surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing unserviceable tiles and rubbish off the premises,complete all as specified and as directed by Engineer-in-Charge.
Dismantling of stone slab of any description including cement mortar bedding but not backing complete all as specified and as directed by Engineer-in-Charge.
M&L 25mm thick Plain Cement Concrete (Nominal mix) 1:2:4, type B0 using 12.5mm graded stone aggregate on floor as sub base or roof surface to bring uniform surfaces including formwork complete all as specified and as directed by Engineer-in-Charge.
M&L for 15mm thick screed bed or bedding layer in CM (1:6) for layer floor finishes,complete all as specified and as directed by Engineer-in-Charge.
M&L for 10mm thick rendering in CM (1:4) on vertical surfaces as backing coat of wall tiles etc,complete all as specified and as directed by Engineer-in-Charge.
M&L for vitrified double charged coloured ceramic tiles 10 mm thick ( Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
All as per item No 23.00 above but on dado / skirting complete all as specified and as directed by Engineer-in-Charge.
M&L non skid ceramic coloured tiles of size 400 x 400mm, 8mm thick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile complete all as specified and directed.
All as per item No 25.00 above but as in vertical surfaces / skirting complete all as specified and as directed by Engineer-in-Charge.
M&L for glazed ceramic coloured tiles (light shade) of size 300x200x7mm thick on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
S&F glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, cutting to reqd shape and size complete all as specified and as directed by Engineer-in-Charge.
M&L for 20mm thick granite (table rubbed) machine cut in skirting / dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type complete all as specified and as directed by Engineer-in-Charge.
M & L for 20mm thick granite (table rubbed) machine cut, bedded on floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, cutting and polishing complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete in ground floor and pavings n. exc 15cm thickness (below or above ground level)complete all as specified and as directed by Engineer-in-Charge.
M&L for 75 mm thick Plain Cement Concrete (nominal mix) 1:2:4 type B2 using 40mm graded aggregate as in path/hard standing and spike rolling to surface or making impressions of expanded metal, while the concrete is green including formwork and provision of expansion joint complete all as specified and as directed by Engineer-in-Charge.
M&L for 50mm thick plain cement concrete (nominal mix) 1:3:6 type C1 using 20mm graded aggregate as in plinth protection /sub base and similar work including formwork complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs CPVC pipes with outer dia 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-in-Charge.
All as per item No 34.00 above but 25 mm outer dia complete all as specified and as directed by Engineer-in-Charge.
All as per item No 34.00 above but 32 mm outer dia complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 15 mm bore GI water tube medium grade ISI marked with all fittings and fixed to wall, floor and ceiling etc, complete all as specified and as directed by Engineer-in-Charge.
All as per item No 37.00 above but 20mm dia complete all as specified and as directed by Engineer-in-Charge.
All as per item No 37.00 above but 25mm dia complete all as specified and as directed by Engineer-in-Charge.
M&L for cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc and making good, cutting n.exc 10cm girth complete all as specified and as directed by Engineer-in-Charge.
Fixing only in repairs Bib Cock/Stop Cock/wall mixers including cleaning,Minor repairs, removing of blockages etc. of any type and size including replacement of unserviceable brass spindle if required complete all as specified and as directed by Engineer-in-Charge. Note : supply only of brass spindle shall be paid separately under relevant item of this schedule.
S&F in repairs vitreous china white heavy duty counter top wash hand basin of 520x440x180mm size, including chromium plated 32mm waste coupling and PVC waste pipe of suitable size & length complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15mm bore fancy type chromium plated centre hole wash basin mixture high quality without popup waste with 450mm braided hoses complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15mm bore chromium plated angular stop cock fancy type high quality with wall flange complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15mm chromium plated Bib Taps fancy type heavy duty with wall flange complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15mm chromium plated, 2 Way Bib Cock heavy duty complete all as specified and as directed by Engineer-in-Charge.
S & F in repair chromium plated health faucet high quality with 8mm dia, 1.2m long flexible tube & wall hook complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs chromium plated 20mm towel rail fancy type high quality of 600mm long complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs chromium plated toilet paper holder fancy type high quality complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs corner glass shelf high quality of 5mm thick glass and chromium plated railing with bracket complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs high quality chromium plated towel holder (ring / square shape) with round flange fancy type complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs sheet glass shelf consisting of 5.5mm thick sheet glass shelf assembly 12cm width with chromium plated guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provision of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs vitreous china ware wash down water closet (pedestal pattern) single piece water closet with PVC seat cover, hinges fixing accessories set, cistern fittings of overall size 640x360x390 etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs waste pipe of dia (32/40mm) complete all as specified and as directed by Engineer-in-Charge.
Supply only brass spindles for Bib Cocks/Stop Cocks/Wall/Basin Mixers etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen with plug washers, waste pipe and coupling includind bedding in cement mortar, two coat plug washers, waste pipe and coupling beddig in cement mortar, two coat iron fixing bracket of required size a connecting union over all size 1040mm x 510mm bowl size 510mm x 405 mm x 203 mm, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 32mm waste coupling, brass, chromium plated for glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and as directed by Engr-in-Charge.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap,complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs plastic water closet seat cover, White, Closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engineer-in-Charge.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracket & flush pipe and fixing to water closet complete all as specified and as directed by Engineer-in-Charge.
M&L for repairs to PVC flushing cistern by replacing minor parts like flushing knob, float, screws, washers including connecting to existing water supply line and water closet pan complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed by Engineer-in-Charge.
S&F in repair decorative type globes bracket for curtain rails complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs stainless steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 100 mm dia chromium plated grating including joints with solvent cement complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs chromium plated towel rack high quality 600mm long with lower hangers complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs PVC bath room cabinet with mirror of size 600 mm x 450 mm pasted coloured with mirror shutter and built in shelves, fixed with CP screws, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs soap dish, brass, chromium plated fixed to wall with brass chromium plated screws complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs gun metal Gate valve ISI marked with iron wheel head screwed both ends for iron pipe of dia 20mm complete all as specified and as directed by Engineer-in-Charge.
All as per item No 73.00 above but 25mm dia bore pipe complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.
All as per item No 75.00 above but 15mm dia complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 15 mm dia Chromium Plated Bib taps cast copper alloy with, capstan head, screwed down for complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs 15 mm dia cast copper alloy chromium plated angle cock/stop cock with long shank and cup screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated incl waste coupling fittings and PVC waste pipe complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc(excluding cistern and flush pipe) including and making the surface flat and clean using concrete bedding of 1:2:4 Nominal mix B1 using 12.5mm stone aggregate and making good to floor complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs 15 mm dia bore fancy type pillar taps ,cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rowel plug in wall,complete all as specified and as directed by Engineer-in-Charge.
Refixing in same opening after carrying out necessary repair work, of shutter of any description exc 1.00 Sqm and not exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats or frames n.exc. 1.5 Sqm each without taking off shutters from the frame complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description exc. 1 Sqm and n.exc. 2.00 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Resecuring or easing & adjusting wooden shutters of any description exc 1 sqm and nexc 2 sqm each without taking down from chowkats complete all as specified and as directed by Engineer-in-Charge.
S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.
S&F 30mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed
S&F 30mm thick factory made glazed and skeleton shutters of 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and as directed by Engineer-in-Charge.
S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening, complete all as specified and as directed by Engineer-in-Charge.
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by Engineer-in-Charge.
S&F 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed by Engineer-in-Charge.
S&F 150mm long extruded aluminium alloy handles anodised , fabricated type complete all as specified and as directed by Engineer-in-Charge.
S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engineer-in-Charge.
S&F 300mm mild steel ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 5.5mm thick sheet glass ordinary quality in aluminum joinery in squares of area exc 0.50 sqm in each pane including necessary adjustments, dismantling and re-securing complete all as specified and as directed by Engineer-in-Charge.
All as per item No 98.00 above but 4mm thick frosted or figured glass complete all as specified and as directed by Engineer-in-Charge.
Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs aluminium anodised window and ventilator members for replacement of unserviceable members in window, ventilators etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs using plywood, grade BWP, type BB 12mm thick 7 No of ply fixed with nails to timber frames as in pelmet boxes and similar works etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs hasp and staple for 75 mm of aluminium anodised complete all as specified and as directed by Engineer-in-Charge.
M&L in repair 0.9mm thickness decorative laminate type 1,of surface finish,colour and pattern as approved, fixed with approved adhesive as per manufactures instructions complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 20mm dia aluminium tubular rail as in curtain rods fixed in cup boards, pelmets and similar work complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs aluminium brackets for fixing of curtain rods complete all as specified and as directed by Engineer-in-Charge.
S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engineer-in-Charge.
S&F 12mm thick toughened glass fixed as in partition/cladding and similar work with stainless steel fittings including necessary sealants etc complete all as specified and as directed by Engineer-in-Charge.
M&L for minor repair to aluminum joinery and making serviceable the same by meance of adjustment, greacing as necessary etc complete all as specified and as directed by Engineer-in-Charge.
S&F mild steel works as in small articles such as hold fast of flat iron 25x3mm bent to shape making holes etc complete all as specified and as directed by Engineer-in-Charge.
M&L for cutting holes in brick walls, one brick thick wall in cement mortar for inserting hold fast and making good dismantles portion in CM 1:3 or PCC (1:2:4) type B-1 using 20mm graged stone aggregate complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and fixing in repair 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and applying two coats of OBD over necessary finishing complete all as specified and as directed by Engineer-in-Charge.
M&L for 40mm thick padding in roof, chajja and similar work in plain cement concrete 1:2:4 type B0 (using 12.5mm graded aggregate) with WPC @ 3% by weight , making haunching if required and surface even and smooth with using extra cement including demolition complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches incuding necessary clamps etc to fixing on walls as required complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches, incuding necessary clamps etc to fixing on walls as required complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 110 mm bore PVC (SWR) bends of any radius complete complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 110 mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 75 mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs PVC (SWR) floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed by Engineer-in-Charge. Note : Cement concrete shall be measured and paid seperately under relevent item of this schedule
M&L for texture painting with complete preparation of surface making even with any means and applying a base coat over a coat of primer and then painting the surface with a final coat of of high quality glossy plastic oil emulsion with texture and pattern as decided complete all as specified and as directed by Engineer-in-Charge.
S&F 6 pin stainless steel cloth hanger for door / wall / Cupboards including fixing arrangements complete all as specified and as directed by Engineer-in-Charge.
V CHINNA DURAI
M/s J. M. Enterprises
Shri K.T. Manoj
Allied Trading Company
EXCEL ENGINEERING WORKS
KHOTEL CONSTRUCTION
S BOSE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .