Permanent Restoration of Road from Athwatoo to Labkachal BWO R/B/Walls, Crash Barrier and Pavement Work in patches Package No JK03-292 under SASCI.

Part A (Pavement) Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). including all carriages and lifts, Complete job., with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete)

Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.2 On bitumen surface @ 0.50 Kg/sqm. with all leads, lifts, loading, unloading and octori.(Finished work to be measured, complete.)

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. . including all carriages and lifts, Complete job., with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete)

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. including all carriages and lifts, Complete job., with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete)

Part B (Protection work/Drain) Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: including all carriages and lifts, Complete job., with all leads, lifts, loading, unloading, stacking and octori.(Finished work to be measured, complete)

Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) . Including all carriages, Lead/Lift, loading/unloading. Finished work to be measured.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) . Including all carriages, Lead/Lift, loading/unloading. Finished work to be measured.

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. . Including all carriages, Lead/Lift, loading/unloading. Finished work to be measured.

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand)Flush/Ruled Pointing . Including all carriages, Lead/Lift, loading/unloading. Finished work to be measured.