Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹63.5 Laccepted-finance | ₹63.5 L | accepted-finance |
Tender Value
₹63.5 L
EMD Value
₹1.3 L
Closing Date
2 May 2026, 9:30 pmClosed
University of Agricultural Sciences Bengaluru
EO - KRISHNAMURTHY D
08023332765
9449866905
Construction of walk in growth chamber at department of crop physiology , GKVK
UASBNG/2025-26/OW/WORK_INDENT110/CALL-4
UASBNG/2025-26/OW/WORK_INDENT110/CALL-4
Open
Other Works
Two Tender Document System(Two Cover)
Vice Chancellor Office Bengaluru
₹1,590
₹1.3 L
2 May 2026
24 Apr 2026
4 May 2026
2 May 2026
Construction of walk in growth chamber at department of crop physiology , GKVK
Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Above the GI sheet cladding, Saint-Gobain toughened glass panels of 8 mm / 10 mm thickness will be fixed around the full surrounding of the shed to ensure maximum visibility, enhanced temperature rete...
Supply and fixing Hot Air Blower as per the following technical specifications: Type - SISW, Model - ACSLL, Make - Air Control Systems, with a fan capacity of 1500 CFM and a fan speed of 1440 RPM. The...
Supply and installation of a humidifier system for the Hardening Chamber, designed to maintain precise humidity levels as per operational requirements. The unit includes a high- efficiency industrial ...
Supply and installation of LED lighting system for the Hardening Chamber, suitable for the 20 ft x 25 ft structure to ensure uniform and sufficient illumination throughout the chamber. The setup inclu...
Supply and installation of a 5-Ton Air Conditioning System suitable for maintaining controlled temperature inside the Hardening Chamber. The unit includes a high-efficiency 5 TR air conditioner (Indus...
Supply and installation of a fully equipped Electrical Panel Board designed to control and protect the Air Conditioning system, Heater, LED Lighting, and Humidifier of the Hardening Chamber. The panel...
Fabricating, supplying and fixing GI Mesh table using 'L' angle frame 2" with 5 mm thickness, legs made out of 50x50x2mm thickness with supporing of 40NB GI Pipe, Top of the table fixing using 4mm GI ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DRAWING.PDF
Design Document • 0.90 MB
KW 3 1.docx
Others - KW3 • 0.23 MB
TN 1.docx
Others - Tender Notification • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].