REPAIRS / MAINTENANCE TO FENCING, BOUNDARY WALL GATES, SEWAGE LINE, AREA DRAINAGE AND PAVED AREA AND ALLIED WORKS IN SARVATRA VIHAR AND CENTRAL AREA OF ZONE C OF AGE BR-I (C) IN GE(CENTRAL) KHADKI.

Amount

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Demolition and breaking up drain pipes (salt glazed ware AC/RCC) drain pipes set in cement mortar, dia of pipe 100mm complete all as specified and as directed.

Description all as per item No. 2 above but dia of pipe 150mm.

Description all as per item No. 2 here-in-before but dia of pipe 200mm.

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard dense soil/ hard rock complete all as specified and as directed.

Excavating over areas in hard rocks exc 1.5 m but n exc 3.00 m deep and getting out n hard rock complete all as specified and as directed.

Demolition of unreinforced cement concrete (below or above GL) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in bed to drain pipes of 100 mm bore including forming cradles complete all as specified and as directed.

Description all as per item No. 8 above but for drain pipes of 150 mm bore including forming cradles complete all as specified and as directed.

Description all as per item No. 8 above but for drain pipes of 200 mm bore including forming cradles complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 100 mm bore, Class NP-2, laid and jointed complete with collars complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 150 mm bore, Class NP-2, laid and jointed complete with collars complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 200 mm bore, Class NP-2, laid and jointed complete with collars complete all as specified and as directed.

Demolition of precast concrete block/brick work walling built in cement mortar complete all as specified and as directed by Engineer-In-Charge.

Material and labour for pre-cast cement concrete solid block masonry with solid block of the grade C-1, (1:3:6) using 20mm graded aggregate set in CM (1:6) complete all as directed.

Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement mortar 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour cement concrete (1:4:8) type D - 2 using 40 mm graded coarse aggregate in foundations filling & mass concrete complete all as specified and as directed.

Material and labour for PCC 1:2:4 Type B-1 using 20 mm graded coarse aggregate finished even and smooth without using extra cement in coping including necessary formwork and benching in bottom of manholes drain etc complete all as specified and as directed.

Supply only integral water proofing compound.

Returning, filling in soil spreading, levelling, watering and well ramming in layers n. exc. 25 cm. complete all as specified and as directed.

Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed.

Demolition of reinforced cement concrete manhole covers n exc. 15cm thickness below or above ground level complete all as specified and as directed.

Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded coarse aggregate) in cover slab set in CM 1:6 complete all as specified and as directed.

Material and labour for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Cleaning and clearing of bore underground Main sewage line/Branch sewer line from any type of trap including (WCs /Gully trap /floor trap/CI pipes /nahani Trap/Bathrooms) to 1st manhole including trap & manhole of any depth by taking off manhole covers and re-fixing the same after cleaning of any descripton , underground and any depth by removing any type of blockage including de-silting and de-chocking sludge/sludge water shall be disposed off by using mechanically or pumping out sewage from block manholes where authorised dumping site declared by local adminstration outside MoD land distance exceeding 2Km but n, exc 2.5 Km complete all as specifed and as directed. Contd to 26

Contd from,,..25 NOTE : - (i) The contractor shall deploy Minimum, experienced 02 safaiwala & 02 helper (Total 04 people) alongwith T & P (i.e Iron seweage line cleaning Rod set -02 Nos, Kassi, Genti, Crow bar, safety hand gloves, safet shoes for all members etc) on regular basis to attend complaint cell/service centre of AGE B/R-I under GE (C) Kirkee area daily between 0830 to 0900 hrs.(ii) The complaint shall be attended preferably on the same day and complaint slips duly signed by the user will be deposited back with JE (Civil) on the same day. (iii) Working time for all the people employed by the contractor will be from 0900 hrs to 1700hrs in case of any emergency, they can be called at any time beyond specifed time and will be given off at the descretion of Eng-in-Charge. (iv) A penalty of Rs. 629/- per day per person will be levied in case of absence of any of safaiwala or helper.(v) Manpower /employees deployed by contractor shall have safety measures for the job and life insurance policy for compensation in case of any accident. The cost for the same is deemed to be include in the unit quoted rate by the bidder. No extra claim will be entertained by the Department. (vi) The payment towards the subject items shall only be made as per the total number of days, contractor had cleaned and cleared the blockages of sewage line. (vii) Contractor shall maintain a register including details of day of cleaning of sewage line, duly signed by contractor and Engineer-in-Charge.

Cleaning by using mechanical equipement of solid/liquid mud/any type of solid content including mud, brick bats, empty containers of any type, rags, polythene or any similar items deposited in underground sewage lines depth upto 5 mtr including manholes/inspection chamber of any size at any depth (STP and main lines from pumping station of any dia) in entire area at Zone A under the premises of AGE B/R-I (C) Kirkee by using SUPER SUCTION MACHINE TRUCK MOUNTED HAVING SUCTION CAPACITY 1000 TO 4000 CUM/HRS, JETTING PUMP WITH WORKING PRESSURE AT NOT LESS THAN 120 BAR having facilities of high pressure water thermoplastic fibre braided water jetting hose and through conical/round shape nozzle pipe. Bottom surface of manhole/inspection chamber & sewage lines should be visible after cleaning process. Sludge/sludge water/any type of waste recovered from sewage lines/manhole/inspection chambers shall be disposed off at authorised dumping site declared by local adminstration outside MoD land distance exceeing 2Km but n, exc 2.5Km etc complete all as specifed and as directed. Contd to 28

Contd from,,..27 NOTE :- (i) All T & P should be arraged by contractor and deemed to include in his quoted rate. (ii) Lines once cleared will be maintained through out the period of the contract, if there is any blockage during the period of the contract, the same will be cleared without any extra cost by the contractor. (iii) In case of any blockage is observed /found in any cleared line through super suction machine during the time period of contract and it becomes necessary to clear the sewage line with machine, the same shall be cleared through machine by the contractor without any extra cost to the department. The line shall be cleared by the contractor within 48hrs after intimation to the contractor. The rate quoted by the contractor against item No 02 above shall be deemed to be inclusive of clearance of line twice time as required during the whole contract period.

Cleaning of existing septic tank of 500 users capacity by using Mechanical Pumping Machine to removing water, sludge, stones, solid particles etc complete from the septic tank at any location and at distance from road and removing the same from the campus and buried complete all as specified and as directed as below: (i) The sludge/burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc. After 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised to keep this aspect in mind while quotating the rates. After taking the measurements, the solid contents shall be disposed off outside the Md land/area. (ii) Necessary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (iii) The contractor shall be entirely responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment/machinary/material at the site of work during the execution.

Description all as specified in item No 29 above but septic tank for 200 users.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises

Material and labour coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour glazed coloured ceramic tiles size of tiles 450x350/300x200x5 to 6mm thick vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4 all as specified and directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Supply and fix vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm (23" approx) white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per Prayag Cat Part No 4055 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repair complete all as specified and as directed.

Material and labour for vitreous china wash down water closet pan (EWC), white (excluding fixing bolts, flushing cistern and flush pipe) all as per Prayag cat Part No.4018 or 4019 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified and as directed.

Supply and fix PVC valveless, syphonic action type, Smart flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per Prayag cat Part No.501 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified and as directed.

Taking up or down steel water tubings and connections bore of pipe 15/20mm dia all as specified and as directed by EIC.

Supply and fix 15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed by EIC.

Supply and fix 20 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed by EIC.

Supply and fix in repair 15mm bore stop valve, chromium plated fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8326/8328 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as per Prayag Cat No 323-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repair 2 in 1 health Faucet (1.00 metre braided tube) with ABS wall hook all as per Prayag Cat Part No.BEA-100-S or techno commercially equivalent makes specified in PS, with 1 meter SS Braided connection pipe complete all as specified and as directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 8306 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repairs for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints in floors or fixed on wall etc complete all as specifed and as directed.

Supply and fix in repair 110 mm PVC (SWR) bends any radius complete all as specifed and as directed.

Supply and fix in repair 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specifed and as directed.

Supply and fix in repair 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specifed and as directed.

Supply and fix in repair 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specifed and as directed.

Supply and fix in repair 110 mm PVC (SWR) junction double, (double T) equal or unequal complete all as specifed and as directed.

Supply and fix in repair 75/110 mm PVC (SWR) Vent cowl complete all as specifed and as directed.

Supply and fix in repair cast iron sanitary connection socket to fit WC out-let of any size and shape complete all as specifed and as directed.

Supply and fix in repair 110mm PVC (SWR) WC connector any type complete all as specifed and as directed.

Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specifed and as directed.

Dismantling of precast interlocking paver blocks/Chequred tiles laid dry of any description thickness & size complete all as specified and as directed.

Material and labour sand/crushed sand filling under floors or foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2 in sub base complete all as specified and as directed.

Material and labour for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006, with grey cement and pigment, rubber moulded tiles M-35 Grade, as in floors, paving, path etc. complete laid over sand cushioning complete all as specified and as directed.

Material and labour 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base course complete all as specified and as directed.

Material and labour chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces complete all as specified and as directed.

Material and labour PCC (1:4:8) Type D2, (using 40mm graded stone aggregate), foundation filling concrete for every posts complete all as specified and as directed.

Supply and fix posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling chain link fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.

Supply only chain link fencing, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply and fix 10mm dia and over round bars cut to length bent to shape for stiffeners etc and similar work complete all as specified and as directed.

Supply only mild steel bolts(machine made), with hexagonal or square head one end and screwed other end, screwed ends to be fitted with washers and one hexagonal or square nut, exc 15 cm long and n.exc 22.5cm long with diameter of shank 5 to 10mm complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix rolled mild steel framed work conforming to Fe-290, Gde E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint including priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed.

MANIYA CONSTRUCTION CO

ARK ENTERPRISES

SUNIL VEER CONSTRUCTION

VP DEVELOPERS AND CONTRACTOR

MAHESH DADAJI BACHHAV

Vastushilpa Contrustion

Aishwarya Constructions