Construction of Model Residential School (SH Construction of i) 4 nos. Hostel ii) Kitchen and Dining Hall iii) Compound Fencing iv) Gate v) Land Development at Joupi, under Khengjoy TD Block, Chandel District, Manipur

Amount

Construction of Hostel A

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level:

1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with

1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, column, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement:

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1cement:3coarse sand)

IN SUPERSTRUCTURE

Extra for brick work in superstructure above plinth level upto 1st floor level

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

Ground Floor walls

Floor-I walls

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footing, bases of columns etc. and mass concrete

Flat surface such as suspended floors,roofs,landing and the like

Columns, pillars, posts and struts (square,rectangular or polygon in plan )

Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

Staircases with sloping or stepped soffits i/c risers and stringers excluding landing.

Chullah hood,weather shade,chajjas,corbels etc.i/c edges

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm & braced with flat iron diagonals 20mm x 5mm sizes with top & bottom rails of T iron 40mm x 40mm x 6mm with 38mm dia steel pulleys complete with bolts & nuts locking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

Aluminium glazed windows and ventilators of stadard aluminium extrusion sectin joints mitred and riveted / screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 and screws of rawl plugs including providing and fixing of glass panes 4mm thick all complete.

In staircases i/c stringers,treads,landings,hand rails etc. steel post 49.5x49.5x3.6

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position.

Local best quality Teak Wood

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws.

Local best quality Teak Wood

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

Providing ad fixing 20mm plank as eave board with:Uningthou wood

FLOORING

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

TUBULAR TRUSSES/STEEL WINDOWS/ALUMINIUM WINDOWS

Steel work in build up tubular trusses including cutting, hoisting, fixing in position and applying ba coat of approved steel primer red oxide zinc chrome primer conforming to (IS:2074-1979) welded and bolted including special shape washer etc. complete.

PROFILE SHEET ROOFING (DYNA)

Trapezoidal Pre-painted Profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68mm long Xylon coated of purlins & trusses. Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.60 mm/5.5 kgs/sqm

Trapezoidal Pre-painted Profile sheet for Ridges Gutter or valley 610mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling roof or equivalent screws of 68mm long Xylon coated screws with PVC washer & caps completed ,excluding the cost of purlins ,rafter & trusses.Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3f/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 f/sand )

RAIN WATER PIPES

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement : 2 fine sand).100mm dia.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm x 112.5 mm of 1:2:4 mix (1 cement: 2 coarse sand :4 hard stone ballast 20 mm & down gauge). 100 mm dia.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

Providing & fixing on walls face G.I. band for rain water pipe i/c fitting the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls weather shield paint of approved quality on new work( three or more coats) to give even shade

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

Construction of Hostel B

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level:

1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with

1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, column, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement:

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1cement:3coarse sand)

IN SUPERSTRUCTURE

Extra for brick work in superstructure above plinth level upto 1st floor level

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

Ground Floor walls

Floor-I walls

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footing, bases of columns etc. and mass concrete

Flat surface such as suspended floors,roofs,landing and the like

Columns, pillars, posts and struts (square,rectangular or polygon in plan )

Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

Staircases with sloping or stepped soffits i/c risers and stringers excluding landing.

Chullah hood,weather shade,chajjas,corbels etc.i/c edges

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm & braced with flat iron diagonals 20mm x 5mm sizes with top & bottom rails of T iron 40mm x 40mm x 6mm with 38mm dia steel pulleys complete with bolts & nuts locking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

Aluminium glazed windows and ventilators of stadard aluminium extrusion sectin joints mitred and riveted / screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 and screws of rawl plugs including providing and fixing of glass panes 4mm thick all complete.

In staircases i/c stringers,treads,landings,hand rails etc. steel post 49.5x49.5x3.6

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position.

Local best quality Teak Wood

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws.

Local best quality Teak Wood

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

Providing ad fixing 20mm plank as eave board with:Uningthou wood

FLOORING

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

TUBULAR TRUSSES/STEEL WINDOWS/ALUMINIUM WINDOWS

Steel work in build up tubular trusses including cutting, hoisting, fixing in position and applying ba coat of approved steel primer red oxide zinc chrome primer conforming to (IS:2074-1979) welded and bolted including special shape washer etc. complete.

PROFILE SHEET ROOFING (DYNA)

Trapezoidal Pre-painted Profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68mm long Xylon coated of purlins & trusses. Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.60 mm/5.5 kgs/sqm

Trapezoidal Pre-painted Profile sheet for Ridges Gutter or valley 610mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling roof or equivalent screws of 68mm long Xylon coated screws with PVC washer & caps completed ,excluding the cost of purlins ,rafter & trusses.Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3f/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 f/sand )

RAIN WATER PIPES

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement : 2 fine sand).100mm dia.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm x 112.5 mm of 1:2:4 mix (1 cement: 2 coarse sand :4 hard stone ballast 20 mm & down gauge). 100 mm dia.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

Providing & fixing on walls face G.I. band for rain water pipe i/c fitting the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls weather shield paint of approved quality on new work( three or more coats) to give even shade

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

Construction of Hostel C

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level:

1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with

1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, column, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement:

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1cement:3coarse sand)

IN SUPERSTRUCTURE

Extra for brick work in superstructure above plinth level upto 1st floor level

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

Ground Floor walls

Floor-I walls

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footing, bases of columns etc. and mass concrete

Flat surface such as suspended floors,roofs,landing and the like

Columns, pillars, posts and struts (square,rectangular or polygon in plan )

Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

Staircases with sloping or stepped soffits i/c risers and stringers excluding landing.

Chullah hood,weather shade,chajjas,corbels etc.i/c edges

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm & braced with flat iron diagonals 20mm x 5mm sizes with top & bottom rails of T iron 40mm x 40mm x 6mm with 38mm dia steel pulleys complete with bolts & nuts locking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

Aluminium glazed windows and ventilators of stadard aluminium extrusion sectin joints mitred and riveted / screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 and screws of rawl plugs including providing and fixing of glass panes 4mm thick all complete.

In staircases i/c stringers,treads,landings,hand rails etc. steel post 49.5x49.5x3.6

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position.

Local best quality Teak Wood

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws.

Local best quality Teak Wood

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

Providing ad fixing 20mm plank as eave board with:Uningthou wood

FLOORING

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

TUBULAR TRUSSES/STEEL WINDOWS/ALUMINIUM WINDOWS

Steel work in build up tubular trusses including cutting, hoisting, fixing in position and applying ba coat of approved steel primer red oxide zinc chrome primer conforming to (IS:2074-1979) welded and bolted including special shape washer etc. complete.

PROFILE SHEET ROOFING (DYNA)

Trapezoidal Pre-painted Profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68mm long Xylon coated of purlins & trusses. Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.60 mm/5.5 kgs/sqm

Trapezoidal Pre-painted Profile sheet for Ridges Gutter or valley 610mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling roof or equivalent screws of 68mm long Xylon coated screws with PVC washer & caps completed ,excluding the cost of purlins ,rafter & trusses.Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3f/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 f/sand )

RAIN WATER PIPES

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement : 2 fine sand).100mm dia.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm x 112.5 mm of 1:2:4 mix (1 cement: 2 coarse sand :4 hard stone ballast 20 mm & down gauge). 100 mm dia.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

Providing & fixing on walls face G.I. band for rain water pipe i/c fitting the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls weather shield paint of approved quality on new work( three or more coats) to give even shade

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

Construction of Hostel D

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level:

1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with

1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, column, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement:

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1cement:3coarse sand)

IN SUPERSTRUCTURE

Extra for brick work in superstructure above plinth level upto 1st floor level

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

Ground Floor walls

Floor-I walls

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footing, bases of columns etc. and mass concrete

Flat surface such as suspended floors,roofs,landing and the like

Columns, pillars, posts and struts (square,rectangular or polygon in plan )

Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

Staircases with sloping or stepped soffits i/c risers and stringers excluding landing.

Chullah hood,weather shade,chajjas,corbels etc.i/c edges

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm & braced with flat iron diagonals 20mm x 5mm sizes with top & bottom rails of T iron 40mm x 40mm x 6mm with 38mm dia steel pulleys complete with bolts & nuts locking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

Aluminium glazed windows and ventilators of stadard aluminium extrusion sectin joints mitred and riveted / screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 and screws of rawl plugs including providing and fixing of glass panes 4mm thick all complete.

In staircases i/c stringers,treads,landings,hand rails etc. steel post 49.5x49.5x3.6

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position.

Local best quality Teak Wood

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws.

Local best quality Teak Wood

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

Providing ad fixing 20mm plank as eave board with:Uningthou wood

FLOORING

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

TUBULAR TRUSSES/STEEL WINDOWS/ALUMINIUM WINDOWS

Steel work in build up tubular trusses including cutting, hoisting, fixing in position and applying ba coat of approved steel primer red oxide zinc chrome primer conforming to (IS:2074-1979) welded and bolted including special shape washer etc. complete.

PROFILE SHEET ROOFING (DYNA)

Trapezoidal Pre-painted Profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68mm long Xylon coated of purlins & trusses. Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.60 mm/5.5 kgs/sqm

Trapezoidal Pre-painted Profile sheet for Ridges Gutter or valley 610mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling roof or equivalent screws of 68mm long Xylon coated screws with PVC washer & caps completed ,excluding the cost of purlins ,rafter & trusses.Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3f/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 f/sand )

RAIN WATER PIPES

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement : 2 fine sand).100mm dia.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm x 112.5 mm of 1:2:4 mix (1 cement: 2 coarse sand :4 hard stone ballast 20 mm & down gauge). 100 mm dia.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

Providing & fixing on walls face G.I. band for rain water pipe i/c fitting the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls weather shield paint of approved quality on new work( three or more coats) to give even shade

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

Construction of Kitchen Dining & Hall

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level:

1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with

1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, columna, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement:

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1cement:3coarse sand)

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

Ground Floor walls

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

(a) Foundation, footing, bases of columns etc. and mass concrete

(g)(i) Columns, pillars, posts and struts (square,rectangular or polygon in plan )

(h)(i) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.laths interlocked together their entire length or joined together at the end by end brackets plates,(guides) channels of arrangements for inside and outside lockingg with push pull operation complete but excluding the cost of hood cover and spring.Shutters having width 3.5mand above.

Providing and fixing 27.5 cm.long wire spring grade no.2 for rolling shutters

Providing and fixing hood cover for rolling shutters.Shutters having width 3.5m and above.

Providing and fixing ball bearing for rolling shutters

Extra for providing(gear operated,mechanical)type.Rolling shutters operated by level gear box and crank handle exceeding 12.00 sqm upto 25.0 sqm in area (average say 18.5 sqm)

Aluminium glazed windows and ventilators of stadard aluminium extrusion sectin joints mitred and riveted / screwed with 15x3 m lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 and screws of rawl plugs including providing and fixing of glass panes 4mm thick all complete.

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position.

Local best quality Teak Wood

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws.

Local best quality Teak Wood

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

Providing ad fixing 20mm plank as eave board with:Uningthou wood

FLOORING

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

TUBULAR TRUSSES/STEEL WINDOWS/ALUMINIUM WINDOWS

Steel work in build up tubular trusses including cutting, hoisting, fixing in position and applying ba coat of approved steel primer red oxide zinc chrome primer conforming to (IS:2074-1979) welded and bolted including special shape washer etc. complete.

PROFILE SHEET ROOFING (DYNA)

Trapezoidal Pre-painted Profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68mm long Xylon coated of purlins & trusses. Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

Trapezoidal Pre-painted Profile sheet for Ridges Gutter or valley 610mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling roof or equivalent screws of 68mm long Xylon coated screws with PVC washer & caps completed ,excluding the cost of purlins ,rafter & trusses.Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3f/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 f/sand )

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls with water proofing cement paint of approved quality on new work (two or more coats ) to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

Construction of Compound Fencing

EarthWork

Earth work in excavation in foundation trenches or drains i/c dressing of sides & ramming of bottoms lift upto 1.5 m i/c getting out the excavated soil & disposal of surplus excavated soil as directed within a lead of 50m.

Hard/dense soil.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer cum by ramming and watering lead upto 50 m and lift upto 1.5 m.

Cement concrete

Providing and laying cement concrete in foundation & plinth excluding the cost of centering & shuttering.

1:4:8(1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1:2 ( 1cement :1 c/sand :2 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 ( 1cement :1.5 c/sand :3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with

1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars.

FORM WORKS

Providing form works i/c centering and shuttering so as to give a rough finish,strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in : ( Using 12 mm shuttering ply).

Foundations, footings, bases of columns, etc. for mass concrete

Columns, pillars, posts and struts (Square, rectangular or polygonal in plan).

Sides or soffits of beams,beam haunchings,cantilevers,girders,bressumers and lintels not exceeding 1m in depth.

BrickWorks

Half brick masonry 2nd class (local first class) in cement mortar 1:3(1 cement : 3 coarse sand) in superstructure.

Extra for half brick masonry in superstructure above plinth (floor one level) to floor two level

STEEL WORKS:

Steel work in single sections, i/c cutting, hoisting, fixing in position & applying a priming coat of red lead paint

In channel, angles & tees.

Finishing

12 mm cement plaster of mix :1:3 (1 cement: 3 coarse sand)

15 mm cement plaster :1:3 (1 cement: 3 coarse sand)

Applying one coat of cement primer of approved quality on wall surface :

Finishing walls with water-proofing cement paint of approved quality on new work (two or more coats) to given an even shade.

Supplying and fixing galvanised steel barbed wire.weighing 9.38kg/100 m straining and fixing to any type of standard rails straining bolts i/c securing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (Posts and struts of wood, concrete, steel and straining bolts shall be paid separately).

Construction of Gate

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level:

1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with

1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, column, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement:

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1cement:3coarse sand)

IN SUPERSTRUCTURE

Extra for brick work in superstructure above plinth level upto 1st floor level

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

Ground Floor walls

Parapet

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footing, bases of columns etc. and mass concrete

Flat surface such as suspended floors,roofs,landing and the like

Columns, pillars, posts and struts (square,rectangular or polygon in plan )

Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

Chullah hood,weather shade,chajjas,corbels etc.i/c edges

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Aluminium glazed windows and ventilators of stadard aluminium extrusion sectin joints mitred and riveted / screwed with 15x3 m lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 and screws of rawl plugs including providing and fixing of glass panes 4mm thick all complete.

Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint. (a) In gratings, framed guard bars, ladders, railings, brackets and similar works.

Steel work in single sections i/c cutting hoisting and fixing in position and applying primer. (b) In M.S. Flat / Plate

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position.

Local best quality Teak Wood

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws.

Local best quality Teak Wood

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

FLOORING

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3C/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 C/sand )

RAIN WATER PIPES

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement : 2 fine sand).100mm dia.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm x 112.5 mm of 1:2:4 mix (1 cement: 2 coarse sand :4 hard stone ballast 20 mm & down gauge). 100 mm dia.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

Providing & fixing on walls face G.I. band for rain water pipe i/c fitting the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls with water proofing cement paint of approved quality on new work (two or more coats ) to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

SH: Land Development

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

MINGYAO RUINANAO