Loading
Loading…
Loading…
Tender ID
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC RONGMEN BLOCK IV NEAR UMROI MILITARY STATION P O BARAPANI SHILLONG 793103 | SHILLONG | RI BHOI | MEGHALAYA | 793103 | L1 | Accepted-AOC BEING REASONABLE | |
| 2 | L2₹45.6 L+₹1.8 L (4.23%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L2 | Rejected-Finance REJECTED NOT LOWEST | |
| 3 | L3₹46.3 L+₹2.6 L (5.91%)Rejected-Finance RONGMEN B IV BARAPANI PO SHILLONG 793103 | RI BHOI | MEGHALAYA | 793103 | L3 | Rejected-Finance REJECTED NOT LOWEST | |
| 4 | L4₹46.4 L+₹2.7 L (6.22%)Rejected-Finance C O SIMPLICITY LYNGDOH LOWER LUMPARING LABAN SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L4 | Rejected-Finance REJECTED NOT LOWEST | |
| 5 | L5₹47.0 L+₹3.3 L (7.56%)Rejected-Finance C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L5 | Rejected-Finance REJECTED NOT LOWEST |
| Sl No | Description | Qty | Unit | Bhuiya Construction L8 | M/s M.L Consortium L2 | M/s Jaiswal and Co L3 | S K Construction L5 | M/S C.M.V CONSTRUCTIONS L7 | M/s UB Enterprise L6 | Lyngdohs Construction Company and Associates L4 | M S Umesh and Co L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of pole and laying of CI/GI/DI/PPR pipe and getting out in any type of soil complete all as specified and directed. | 922.37 | Cum | 500 ₹4,61,187 | 380 ₹3,50,502.12 | 373 ₹3,44,045.5 | 385 ₹3,55,113.99 | 330 ₹3,04,383.42 Lowest | 410 ₹3,78,173.34 | 390 ₹3,59,725.86 | 370 ₹3,41,278.38 |
| 2.00 | Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 92.24 | Cum | 400 ₹36,894.96 | 240 ₹22,136.98 | 300 ₹27,671.22 | 300 ₹27,671.22 | 400 ₹36,894.96 | 300 ₹27,671.22 | 250 ₹23,059.35 | 100 ₹9,223.74 Lowest |
| 3.00 | Returning, filling in, and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. | 830.14 | Cum | 200 ₹1,66,027.32 | 180 ₹1,49,424.59 | 160 ₹1,32,821.86 | 130 ₹1,07,917.76 | 120 ₹99,616.39 | 170 ₹1,41,123.22 | 150 ₹1,24,520.49 | 99 ₹82,183.52 Lowest |
| 4.00 | Taking up old unserviceable CI water mains (including all fittings) of size 150 mm bore with spigot and socket ends, tail pieces, sluice valves and lead joints etc. including burning out joints and recovering lead complete all as specified and directed. | 150 | RM | 120 ₹18,000 | 105 ₹15,750 | 105 ₹15,750 | 110 ₹16,500 | 160 ₹24,000 | 120 ₹18,000 | 102 ₹15,300 Lowest | 105 ₹15,750 |
| 5.00 | Taking up old unserviceable CI water mains (including all fittings) of size 100 mm bore with spigot and socket ends, tail pieces, sluice valves and lead joints etc. including burning out joints and recovering lead complete all as specified and directed. | 400 | RM | 120 ₹48,000 | 115 ₹46,000 | 110 ₹44,000 | 111 ₹44,400 | 160 ₹64,000 | 140 ₹56,000 | 110 ₹44,000 | 105 ₹42,000 Lowest |
| 6.00 | Taking up old unserviceable CI/GI water mains (including all fittings) of size 80 mm bore with spigot and socket ends, tail pieces, sluice valves and lead joints etc. including burning out joints and recovering lead complete all as specified and directed. | 360 | RM | 90 ₹32,400 Lowest | 115 ₹41,400 | 105 ₹37,800 | 101 ₹36,360 | 160 ₹57,600 | 140 ₹50,400 | 110 ₹39,600 | 99 ₹35,640 |
| 7.00 | Supplying, laying, jointing and testing ductile iron pipe, K-9 type with spigot and socket ends of size 150 mm dia laid in trenches including rubber gasket (tyton ring) jointing materials, etc. complete all as specified and directed.
Note : DI fittings, excavation and PCC to be measured and paid separately. | 150 | RM | 4,500 ₹6,75,000 | 3,650 ₹5,47,500 | 3,550 ₹5,32,500 | 3,550 ₹5,32,500 | 4,200 ₹6,30,000 | 3,600 ₹5,40,000 | 3,650 ₹5,47,500 | 3,495 ₹5,24,250 Lowest |
| 8.00 | Supplying, laying, jointing and testing ductile iron pipe, K-9 type with spigot and socket ends of size 100 mm dia laid in trenches including rubber gasket (tyton ring) jointing materials, etc. complete all as specified and directed.
Note : DI fittings, excavation and PCC to be measured and paid separately. | 400 | RM | 3,500 ₹14,00,000 | 2,560 ₹10,24,000 | 2,800 ₹11,20,000 | 2,580 ₹10,32,000 | 2,800 ₹11,20,000 | 2,600 ₹10,40,000 | 2,560 ₹10,24,000 | 2,460 ₹9,84,000 Lowest |
| 9.00 | Supplying, laying, jointing and testing ductile iron pipe, K-9 type with spigot and socket ends of size 80 mm dia laid in trenches including rubber gasket (tyton ring) jointing materials, etc. complete all as specified and directed.
Note : DI fittings, excavation and PCC to be measured and paid separately. | 360 | RM | 2,500 ₹9,00,000 | 2,250 ₹8,10,000 Lowest | 2,480 ₹8,92,800 | 2,570 ₹9,25,200 | 2,800 ₹10,08,000 | 2,650 ₹9,54,000 | 2,550 ₹9,18,000 | 2,450 ₹8,82,000 |
| 10.00 | Supply and fixing ductile iron fittings for socketed spigot, Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs any shape, of size up to 200mm bore complete all as specified and directed.
Note: Run lead joints shall be measured and paid separately. | 113 | Kg | 365 ₹41,245 | 390 ₹44,070 | 390 ₹44,070 | 388 ₹43,844 | 420 ₹47,460 | 400 ₹45,200 | 398 ₹44,974 | 350 ₹39,550 Lowest |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
26 Aug 2025, 6:00 pmClosed
GE Umroi
Military Engineer Services Garrison Engineer Umroi Umroi Military Station PO - Barapani, Shillong-793 103
SPL REPAIR OF OLD RUSTED CI/GI PIPELINE AND ALLIED WORKS AT INF BN-I AND III AT UMROI MIL STN UNDER GE UMROI
2025_MES_716574_2
8949/E8
Open Tender
Civil Works
Item Rate
180 days
GE Umroi
AS PER NIT
8 documents required · 8 mandatory
₹500
GE Umroi
₹78,000
Yes
26 Sept 2025
5 Aug 2025
28 Aug 2025
5 Aug 2025
26 Aug 2025
12 Aug 2025
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of pole and laying of CI/GI/DI/PPR pipe and getting out in any type of soil complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Returning, filling in, and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Taking up old unserviceable CI water mains (including all fittings) of size 150 mm bore with spigot and socket ends, tail pieces, sluice valves and lead joints etc. including burning out joints and recovering lead complete all as specified and directed.
Taking up old unserviceable CI water mains (including all fittings) of size 100 mm bore with spigot and socket ends, tail pieces, sluice valves and lead joints etc. including burning out joints and recovering lead complete all as specified and directed.
Taking up old unserviceable CI/GI water mains (including all fittings) of size 80 mm bore with spigot and socket ends, tail pieces, sluice valves and lead joints etc. including burning out joints and recovering lead complete all as specified and directed.
Supplying, laying, jointing and testing ductile iron pipe, K-9 type with spigot and socket ends of size 150 mm dia laid in trenches including rubber gasket (tyton ring) jointing materials, etc. complete all as specified and directed. Note : DI fittings, excavation and PCC to be measured and paid separately.
Supplying, laying, jointing and testing ductile iron pipe, K-9 type with spigot and socket ends of size 100 mm dia laid in trenches including rubber gasket (tyton ring) jointing materials, etc. complete all as specified and directed. Note : DI fittings, excavation and PCC to be measured and paid separately.
Supplying, laying, jointing and testing ductile iron pipe, K-9 type with spigot and socket ends of size 80 mm dia laid in trenches including rubber gasket (tyton ring) jointing materials, etc. complete all as specified and directed. Note : DI fittings, excavation and PCC to be measured and paid separately.
Supply and fixing ductile iron fittings for socketed spigot, Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs any shape, of size up to 200mm bore complete all as specified and directed. Note: Run lead joints shall be measured and paid separately.
Supply and fixing in repair ductile iron fittings for socketed spigot, Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs any shape, of size 200mm to 300mm bore complete all as specified and directed. Note: Run lead joints shall be measured and paid separately.
Supply and fix in repair ductile iron sluice valve flange type of size 200 mm dia PN 1.6 grade with stainless steel spindle & brass check nut (non raising spindle type conforming to IS - 14846) including fixing to pipe line with nuts, bolt and washers, rubber gasket (neoprene) complete all as specified and directed.
Supply and fix in repair ductile iron sluice valve flange type of size 150 mm dia PN 1.6 grade with stainless steel spindle & brass check nut (non raising spindle type conforming to IS - 14846) including fixing to pipe line with nuts, bolt and washers, rubber gasket (neoprene) complete all as specified and directed.
Supply and fix in repair ductile iron sluice valve flange type of size 100 mm dia PN 1.6 grade with stainless steel spindle & brass check nut (non raising spindle type conforming to IS - 14846) including fixing to pipe line with nuts, bolt and washers, rubber gasket (neoprene) complete all as specified and directed.
Supply and fix in repair ductile iron sluice valve flange type of size 80 mm dia PN 1.6 grade with stainless steel spindle & brass check nut (non raising spindle type conforming to IS - 14846) including fixing to pipe line with nuts, bolt and washers, rubber gasket (neoprene) complete all as specified and directed.
Supply and fix 450mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars for water supply pipe line protection complete all as specified and directed.
Cutting cast iron pipes of size 200/150mm bore and reducing to required length before laying in position for insertion of new tees, branches, etc for taking branches connection complete all as specified and directed.
Cutting cast iron pipes of size 100/80 mm bore and reducing to required length before laying in position for insertion of new tees, branches, etc for taking branches connection complete all as specified and directed.
Drilling and tapping DI/cast iron water mains (in position) for branch connections of the internal dia 15/20mm complete all as specified and directed.
Taking up old unserviceable GI pipe and connections of sizes 50 mm bore including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up old unserviceable GI pipe and connections of sizes 40 mm bore including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up old unserviceable GI pipe and connections of sizes 25 mm bore including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up old unserviceable GI pipe and connections of sizes 20 mm bore including cleaning for re-fixing or removal to store complete all as specified and directed.
Supply and fixing 50mm bore Galvanised Iron pipe, medium grade, laid in trenches with all fittings such as tees, bend, elbows, sockets, reducer, nipples and union complete all as specified and directed by Engr-in-charge.
Supply and fixing 40mm bore Galvanised Iron pipe, medium grade, laid in trenches, with all fittings such as tees, bend, elbows, sockets, reducer, nipples and union complete all as specified and directed.
Supply and fixing 25mm bore Galvanised Iron pipe, medium grade, and fixed complete to walls and ceilings or laid in trenches, with all fittings such as tees, bend, elbows, sockets reducer, nipples and union complete all as specified and directed.
Supply and fixing 20mm bore Galvanised Iron pipe, medium grade and fixed complete to walls and ceilings or laid in trenches with all fittings such as tees, bend, elbows, sockets, reducer, nipples and union complete all as specified and directed.
M&L for preparation of old painted surfaces for CI/ MS pipe lines, distribution header and any other type of surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing 50mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe including taking down old unserviceable gate valve complete all as specified and directed.
Supply and fixing 40mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe including taking down old unserviceable gate valve complete all as specified and directed.
Supply and fixing of 25mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe including taking down old unserviceable gate valve complete all as specified and directed.
Supply and fixing of 20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe including taking down old unservicesble gate valve complete all as specified and directed.
M&L construction of brick masonry valve chamber of size 600mm x 600mm x 750mm (Internal dimension) with PCC 1:3:6 foundation 150mm thick, brick work 23cm thick built in CM 1:6, PCC 1:3:6 coping 50 mm thick, plastering 15mm thick in CM 1:4 to all internal and exposed surfaces including excavation earth work in any type of soil, MS sheet cover 3mm thick fixed with angle iron frame 30x30x4 mm including hinges of size 125mm with locking arrangement embedded in PCC and painting of MS cover with two coats of synthetic enamel paint over a coat of red oxide primer, etc. complete all as specified and directed.
M&L construction of brick masonry valve chamber of size 1200mm x 1200mm x 1200mm (Internal dimension) with PCC 1:3:6 foundation 150mm thick, brick work 23cm thick built in CM 1:6, PCC 1:3:6 coping 50 mm thick, plastering 15mm thick in CM 1:4 to all internal and exposed surfaces including excavation earth work in any type of soil, MS sheet cover 3mm thick fixed with angle iron frame 30x30x4 mm including hinges of size 125mm with locking arrangement embedded in PCC and painting of MS cover with two coats of synthetic enamel paint over a coat of red oxide primer, etc. complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description, in ground floor n exc 15cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 100 mm thick PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate as in path, finishing concrete surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for Cement concrete 1:3:6 Type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Schedule of Credit
M/s M.L Consortium (BID ID -3401953)
M/s Jaiswal and Co (BID ID -3404790)
Lyngdohs Construction Company and Associates (BID ID -3399253)
S K Construction (BID ID -3398455)
M/s UB Enterprise (BID ID -3404728)
M/S C.M.V CONSTRUCTIONS (BID ID -3398697)
Bhuiya Construction (BID ID -3398656)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .