Extension of room in existing control room building for accommodation of New C and R panel for conversion of 30V DC to 110Volt DCs at 110KV Koodankulam SS

Amount

Dismantling and Clearing Brickwork in C.M and carefully disposed the debris away from site including labour charges lead lift etc.,as instructed.

Dismantling and Clearing Doors and Windows and carefully stacking the materials for reuse including labour charges lead lift etc.,

Dismantling a of RCC and the debries and carefully disposed away from site including labour charges lead lift etc

Dismantling and clearing of stone masonry in Cm wall under 3m high and the debries to be carefully disposed away from site including labour charges lead lift etc

Earthwork excavation in hard stiff clay, stiff black cotton, hard red earth, shales murram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil for foundation including labour charges lead lift etc.,

Earthwork excavation in soft disintegrated rockincluding labour charges lead lift etc.,

Earthwork excavation in medium rock including labour charges lead lift etc.,

Refilling with excavated sand complying with standard specification for filling in foundation and basement

Providing antitermite treatement in 4 stages I.immediately after earthwork excavation and before laying foundation concrete ii.after refilling for sides of foundation iii. Before laying of flooring concrete and outside of basement upto 1m alround the building using termit 250ml for 5 litres of water.

PCC 1:4:8 mix using 40mm HBG With out form work(machine crushed) metal for foundation including cost of all materials lead lift curing etc complete.

Collection and supply of good quality of gravel and stacking them to Departmental gauge for premeasurements including cost of all materials lead, lift, loading, unloading etc., complete.

Filling Quarry Dust and stacking them to Departmental gauge for premeasurements including cost of all materials lead, lift, loading,unloading etc.,complete.

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 3/8"x 2 3/4" including cost of all materials labour lead lift curing etc complete.

Providing Shutter for sides of R.C.C./ plane surface, including strutting ,using M.S sheets and supported by causurina props complying with standard specification etc complete.

Plinth beam

varandah pillar

sunshade , Sill Slab

RCC roof slab

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting bending tying and Fixing in position as per specification including cost all materials lead lift cost of binding wire etc complete.

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for lintel, Sunshade,T beam, roof slab concrete without formwork including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator)

Special ceiling Plastering for RCC slabs, beams and sunshade with CM 1:3, mix 10mm thick for ceiling including hacking all cost labour materials lead lift labour curing etc complete.

Applying one coat of Zinc primer for steel before applying Special ceiling plastering all cost labour materials lead lift labour curing etc complete.

Special ceiling Plastering for RCC slabs, with CM 1:3, mix 10mm thick with Nitobond SBR 0.175lit/bag and concure WB white for curing including all cost labour materials lead lift labour curing etc complete.(curing does not required)

Plastering with CM 1:5, mix 12mm thick for wall including all cost labour materials lead lift labour curing etc complete.

Flush Pointing with CM 1:3, mix 12mm thick for Randam rubble including all cost labour materials lead lift labour curing etc complete.

Cement morter floor finising with C.M 1:3 20mm thick including cost of all materials, labour, lead, lift etc.complete.

Providing border in CM 1:3, 12mm thick, 75mm width including cost of all materials, labour, lead, lift etc. complete.

Providing border in CM 1:3, 20mm thick, 200mm widthincluding cost of all materials, labour, lead, lift etc. complete.

Paving the approved quality of stain free nano vitrified tiles size 600x600x8 mm over a base layer of Cement mortor 1 : 3, 20 mm thick pointing with same coloured cement finishing the joints including of all materials, labour, lead, lift, etc complete as per the direction of Engineer at site.

Supplying and fixing of single leaf door in anodized aluminum section partially paneled with decorative finished pre- laminated particle board 8mm thick both sides and partially 4mm tnick plain glass with the sections 63.5x38.10x1.95mm box section for frame and using door section 85x44.45x22mm for vertical, 48x 44.5 x2mm for top and 47.62x44.45x3.18 middle, 95.25x44.45x 25.4x2mm for bottom etc., with all necessary fixtures such as handles(American), hinges(4"), lock(Godrej), Namath etc., complete including cost of all materials, lead, lift, etc., complete as directed by the Engineer at the site.

supply and fixing pre-painted galvanized iron three track sliding panel sliding window fabricated from roll formed sections for outer frame three track 92x44mm , shutter should be 35x49mm with a 4mm plain glass , section for euro groove should be 25mmx24mm and for lab strip 30x41mm . the frame and shutter sections cut and joined with corner brackets made of glass filled nylon . frame should be fixed to brick masonry by using nylon self-expanding caps and driving MS electro plated 80mm long screws into the cap through frames.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour with continous earth wire connection of 14SWG wire for open PVC light point / fan point (For electronic regulator) (SD-16)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supply and fixing of single box type 4' x 22W crystal glass LED tube ight fitting complete ,with PVC unsheathed Copper leads from terminals to the fitting

supply and fixing of 375mm(15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall including labour, lead ,lift, etc complete

Supply and fixing of louvers shutters arrangement for 375mm (15")sweep light duty AC Exhaust fan complte.(SD:121)

Supplying and fixing in position best quality PVC 110mm dia down fall pipe - 6kg/sq.cm, having ISI mark including the cost of PVC pipe, all materials, labour, lead,lift, T&P etc

Providing weathering coarse with one course of pressed tiles of size 25x25x2cm embeded in CM 1:3 mixed with crude oil 10% by weight of cement and pointed with the same oil mixed CM 1:3 used over a bed of brick jelly lime concrete of 80mm thick with ratio of 32:12.5 etc ( No sand ) with the required slope and beaten with wooden beaters including cost of all materials curing etc complete.

Providing one course of pressed tiles of size 25x25x2cm embeded in CM 1:3 mixed with crude oil 10% by weight of cement and pointed with the same oil mixed CM 1:3 used with the required slope and beaten with wooden beaters including cost of all materials curing etc complete.

Removal of old broken glass panels from metal frames including releasing of beading ,punching or drilling out old glazing pins and supplying & fixingof 4mm thick plain glass panes bedded in putty and fixed with beading,punching including cost of labour arrangements of scaffolding, ladder, lead,lift etc complete.

Supplying and fabrication of Grill works using 35x35x5mm Angle and screw and fixing in position in wall for Sunshade as per direction of Engineer including materials , labour, lead, lift etc complete

Supplying of MS colour coat 0.45mm thick sheet with reqiured screw, bitumen washer and fixing in position for sunshade with as per direction of Engineer including materials , labour, lead, lift etc complete

Supplying and fixing of 6mm chequered plate,MS channel , Angle including the cost of materials,lead lift, etc, complete

White Washing two coat of white cement including the cost of all materials, labour, lead, lift, T&P etc complete.

Colour Washing Two coats using interior plastic emulsion paint over one coat of Primer for inner after through scrapping including the cost of all materials, labour, lead, lift, T&P etc complete

Colour Washing Two coats using Exterior emulsion paint over one coat of Primer for iouter wall after through scrapping including the cost of all materials, labour, lead, lift, T&P etc complete

Painting 2 coats of approved quality of enamal paint over a ready mixed primary coat for all exposed faces of new steel doors & windows and grill etc including cost of all materials , scrapping, labour, lead,lift etc complete.

Casting of Pre cast RCC slab 1:1.5:3 mix using 12 to 20mm metal for man Hole Cover including all cost of materails lead lift etc complete. (exculding Steel reinforcement)

laying of Pre cast RCC cover slab for cable duct including all cost of lead lift etc complete

GST 18% as per GOVT norms

K.T. PAUL RAJ

SHAKTHI CONSTRUCTION