COMPREHENSIVE REPAIRS TO CIVIL WORKS TO CERTAIN BUILDINGS AT KALINA MILITARY CAMP UNDER GE NORTH MUMBAI

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed

Material and labour for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring / hard standing / path, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge. Note: The plinth protection shall be laid in panels and length of the each panel shall not be morethan 2.00 m.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frame with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.

Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4 sqm with shutters (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description not exceeding 1 sqm each including fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each including fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed by Engineer-in-Charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 156 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed by Engineer-in-Charge. Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S TUFFFLON/M/S Dura Plast Extrusion

Supply and fix factory pressed steel frames made out of mild steel black sheet 1.25mm thick of profile 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including shop coat of primer and threshold of 12mm dia round bar 1 No welded at bottom of frame etc., complete all as specified and as directed

Supply and fix factory pressed steel frames made out of mild steel black sheet 1.25mm thick of profile 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including shop coat of primer and threshold of 12mm dia round bar 1 No welded at bottom of frame etc., complete all as specified and as directed

Supply and fix 35mm thick factory made 2nd class hard wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix factory made plain framed panelled shutter 35mm thick 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Material and labour for plain cement concrete 1:2:4, type B0, using 12.5mm graded stone aggregate as in filling of door chawkats etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed plates, concrete block for hold fast etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20 mm thick Makrana colour/white marble machine cut on window cills, over cement screed base laid and joined with gray cement slurry mixed with pigment to match the shade including edge cutting , nosing , rubbing and polishing incl 20 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 4.8mm thick plain glass, in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing to aluminium frame with glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 or RG 102, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alumigrill Pvt Ltd or equivalent make as approved by GE

Material and labour for surface preparation of structural part by gentle chipping by manually to make the surface rough and thoroughly cleaned with air as per standard practice and directions of Engineer-in-charge (including removal of external plaster, wherever exists) costs inclusive of transportation, labour, conveying debris away from the site (max 50m) tools and tackles, lead and lift etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Supply and fix mild steel TMT bars 8 to 10mm dia in stirrups, spacers and binder cut to length bent to shape required inch cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Demolition of reinforced cement concrete of any description in any position including necessary scaffolding arrangement (reinforcement cut as required to facitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. Note : Reinforcement obtained from this item shall be handed over to contractor on account of sch of credit

Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour and but excludes the materials for grouting the pins.etc complete all as specified and as directed by Engineer-in-Charge.

Repairing of excessively damaged concrete portion by using superfluid dual shrinkage compacted and providing, casting with micro concrete of grade M-40 at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing etc complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .

Material and labour for formwork of to pour the micro concrete/concrete using steel shutters or 12mm marine ply to have the form finish including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and applying rust cleaner (Re-backler solution) to exposed corroded reinforcement @ 0.20 Litre/Sqm or approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc. complete as directed by Engineer-In-Charge.

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB or equivalent of approved make and quality comprises of resin and hardener mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. NOTE:- New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work.

Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge

Material and labour for drilling and fixing teflon nozzles in RCC members, including drilling holes (drilling 12 mm dia, 40mm deep holes in structural members at the intervals of 600mm c/c in staggered manner or s directed by Engineer-in Charge in RCC structure elements and cleaning the holes (to clean the holes by air blower prior to fixing nozzles) and fixing of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles (to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles to be machined to receive outlet of grouting gun and fixing it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and curing the system for minimum 12 hrs) and cutting of nozzles (to cut the nozzle by chisel after completion of grouting without damaging structural elements etc complete all as specified and as directed by Engineer-in-Charge.

Injecting low viscosity (3-5 cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories, till nozzles refuses to accept the grout, Including, Mixing of materials( Mixing material components (part a & b) in required quantities as per manufacturer’s instruction by weigh batching) and Grouting ( Filling the grouting gun with monomer. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (4 to 5 Kg/ Cm2) by monitoring pressure gauge at exit. Grouting the material through prefixed nozzles in the structural elements till its refusal. Sealing the nozzle with epoxy putty after the refusal. Monitoring leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process for all the nozzles. the operation to be within pot life of the material.)and Cleaning of gun and accessories ( the gun and accessories like valves, pipes and other fixtures to be cleaned with thinner after the operation to avoid jamming of the gun.) etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTER over identified R.C.C. members in One layer in proportion of 1:5:15 by weight of polymer of approved make, cement and filler material of approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge. Note for Item No.24 to 36:- (i) The work under Item No. 24 to 36 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority.

Supply and fix Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as specified and as directed by Engineer-in-Charge.

Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads all as specified and as directed by Engineer-in-Charge.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 140mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix stainless steel butt hinges, medium weight, 100mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix stainless steel butt hinges, medium weight, 125mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing),depositing debris out side MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles (joint free), 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

All as per item No.47 described here-in-before but as in skirting including 10mm thick backing coat in CM 1:4

Material and labour for non skid coloured ceramic tiles (joint free), 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick / 450mm x 350mm x 7mm, on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for 25mm thick plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in flooring, finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for chemical injection of post construction Anti-termite Treatment to along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litre per metre including dilling and plugging holes etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for post construction Anti-termite Treatment of soil under existing floors using chemical emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for post construction Anti-termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 10mm thick rendering with cement mortar 1:6 on fair faces of brick or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 15mm thick (10 + 5) plaster in Cement Mortar (1:4) on fair faces of the brick or concrete surfaces including dubbing out plaster in cement mortar (1:6) of any thickness using water proofing compound @ 3% by the weight of cement or as per manufacturer instructions and finished the surface even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Water proofing compound shall be mixed in second coat i.e. 5mm thick. (ii) WPC will be measured & paid separately as supplied only.

Material and labour for 05mm thick rendering with cement mortar 1:3 on concrete surfaces of ceiling, finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for opening out cracks in wall surfaces in 'V' shape by mechanical grinder and removing the loose material. filling with crack filler of Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer's instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as appproved by GE

Material and labour for preparation of undecorated wall surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for preparation of undecorated ceiling surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for preparation of ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new plastered surfaces of wall and applying two coats of oil bound distemper on wall surfaces over a coat of alkhali resistant primer complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparing new surfaces of wall and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints

Material and labour for painting with synthetic enamel paint of two coat over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including preparation of surfaces. all as specified and as directed. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Supply and fix in repairs GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing to wall/floor including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make : Jindal / Zenith / Tata / Prakash / Swastik

Supply and fix in repairs GI tubing, medium grade, 20 mm bore with all fittings and connections and fixing to wall/floor including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make : Jindal / Zenith / Tata / Prakash / Swastik

Dismantling of 100mm dia cast iron / 110mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Dismantling of 80mm dia cast iron / 75mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Supply and fix UPVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix UPVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix UPVC (SWR) bends of any radius 110mm bore with access door etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix UPVC (SWR) bends of any radius 75mm bore with access door etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix UPVC (SWR)vent cowl 110mm bore etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix UPVC (SWR)vent cowl 75mm bore etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix rotational moulded polyethylene water storage tanks 500 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

Supply and fix rotational moulded polyethylene water storage tanks 1000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

Supply and fix rotational moulded polyethylene water storage tanks 2000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs, concealed stop valve fancy type cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko

Supply and Fix in repair PVC connection,15 mm size with PTMT nuts, of length 600 mm complete all as specified and as directed by Engineer-in-Charge. Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet

Supply and fix in repairs gun metal gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

Supply and fix in repairs gun metal gate valve, 15mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

Supply and fix in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 20 mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 455 gms) Make: Prayag / POLYTUF or in equivalent

Supply and fix in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 455 gms) Make: Prayag / POLYTUF or in equivalent

Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson Note:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately as "Supply only

Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) & provision of Plain cement concrete 1:5:10 nominal mix type E2 using 40mm stone aggregate all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC seat cover chromium plated hinges & nuts including ‘P’ trap / 'S' trap, connection to drain flushing pipe, antisphonage pipe including taking down existing etc complete all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant/Parryware/Prayag

Supply and fix in repairs, 10 litre capacity, PVC flushing cistern, white, symphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, CI brackets etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Hindustan Sanitary Ware / Parryware / Commander / CERA / M/s Johnson Peddar

Supply and fix in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PTMT health faucet (body cleaner) with 1.0m tube and hook (PVC tube), white/ivory all as specified and as directed. Make :Prayag or equivalent as approved

Supply and fix in repairs bib cock, chromium plated, two way double handle with flange all as specified and as directed. Make :Soma / Leader / Zoloto / Jaquar (Essco)/Prayag

Supply and fix in repairs chromium plated brass towel ring all as specified and as directed. Make :Prayag Cat No. BA-21 or equivalent as approved

Supply and fix aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge. Make : Crown / Jindal / Essess / Swastik

Supply and fix in repairs aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repairs extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix in repairs aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

mp construction co

Vishal Builders

Parmatma Enterprises

joshua construction