Re-construction of Kalwa Kinana Pump house out falling RD 81000 Sunder Sub Branch

Amount

Earth work in ordinary soil with a combined lead & lift upto 30 mtr. as per HSR item no. 6.2(b), (c ) (i)

Preparing watering and ramming surface for laying concrete in irrigation channels horizontal HSR Item No 10.122 (b) (i)

Shuttering for faces of concrete foundation and foundation beams vertical or battering HSR Item No 9.13

Design mix cement concrete of grade M-15 with minimum cement contents 240 Kg per cum in foundation and plinth. HSR Item no 10.64

Design mix cement concrete of grade M-25 with minimum cement contents 330 Kg per cum in F&P as per HSR item no. 10.66

Centring and shuttering for face of walls and partitions wall and retaining walls etc.(vertical bettering) i/c attached plasters butterus etc. (HSR item No 9.5

Centring and shuttering for slab curverts with smooth exposed surface of slab exceeding 3 mtr. but upto 6 mtrs span (HSR item No 9.18(b) & note No XI chapter No 10

Rehandling along structures with earth work excavated from foundation and trenches with a combined lead of 15 mts. HSR Item No 6.2 (b)

Ist class brick work laid in cm 1:3 in F&P. as per HSR item No.11.5

Cement pointing 1:2 deep variety brick and tile work (HSR item No.15.60)

10 mm thick cement plaster 1:4 (HSR Item No15.5

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc on new work to give an even shade as per HSR Item No 16.61

Providing weep hole in F.O. wall i/c well drainage filter (NS item)

Steel rainforcement TMT bars FE-500 EQR/ FE-500 D complete & note (HSR Item No.18.22)

Providing and fixing in position caution iron board 4'x3', 500' U/s & D/s 500' from diversion of channel (NS item )

Sand filling behind abutment, wing walls and F.O. walls with an average lead of 5 Km i/c loading and unloading (HSR item No. 5.2 (a) 4.1(a)

Filling loose stone boulders in bed of drain

Structural steel work in compound girders or stanchions built up from two or more R.S joists or channel section or plates and angles etc. revetted i/c cutting and fixing all lattice bars, stifferens gusset plates as per H.S.R item no. 18.5(a)

Steel work fixed independently without connecting plates i/c cutting hoisting and fixing in position flats as per HSR item no. 18.1(b)

Structural steel work in angles, tees, and flats welded i/c cutting fixing all gusset plates, bolts, nuts, welding rods etc with hoisting and erecting in position for roof trusses, well kerbs, plates and trussed girders etc of any span for buildings and bridges as per HSR item no. 18.7

Corrugated G.I sheet roofing 0.80 mm thick fixed with G.I 'J' or 'L' hooks 10 mm dia G.I Limpet and bitimen washers complete excluding the cost of purlins rafters and trusses as per HSR item no. 13.18

Ridges and valleys 45 cm over all in plain GI sheets 0.80 mm thick fixed with galvanized iron J and L hooks 10 mm dia. GI limpet and bitumen washers complete as per HSR item no. 13.23

Planking of commercial hard wood such as hillock champ chikras and chaplash etc. planed on both sides rebated and fixed et. 40 mm thick as per HSR item no. 17.16 (c )

Supply and fixing rolling shutters of approved make, M.S. laths interlocked together with 80 mmx1.25 mm MS laths as per HSR item no. 18.18(b)

Supplying openable steel doors and windows of standard steel sections, joints mitred and electrically flash welded i/c provision for arrangement of receving handles complete as per HSR item no. 18.24

Providing and fixing fan hooks 80 cm long each size of required shape and size 16 mm dia as per HSR item no. 18.38(a)

Wiregauge of 140 G or 120 G designation fixed on steel windows of standard rolled steel section with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welled complets in all respect as per HSR item no. 18.32

Applying primary coat with metal primer on steel or iron work i/c preparation of surface as per HSR item no. 16.9

painting two coats excluding priming coat with ready mixed paint for metalic surfaces in all shades on new steel works as per HSR item no. 16.17

White washing three coats as per HSR item No. 16.48

Providing and laying filter media with bricks bats of varying sizes.

Dismentling of brick work in cement HSR Item No 8.5(b)

Dismentling of cement conc 1:3:6 plain HSR Item No 8.6(c )

Dismantling of steel work upto height of 5 mtr. in bulit up section in angles, tees i/c all gusset plate, belts, nuts etc as per HSR item no. 8.22(a)

Removing rolling shutters i/c top cover bracket and side guides etc. complete

Srripping and stacking iron sheets of a roof i/c ridges etc.

Bricks

JOGINDER SINGH CONTRACTOR