REPAIR/MAINT OF UNSV INTERNAL ELECTRIFICATION WORK AND REPLACEMENT OF OLD UNSV SUBMAIN WIRING DBS VARIOUS TYPES OF LED FITTINGS AND FIXTURES FOR OTM ACCN AT ANAND PARBAT UNDER GE NORTH DELHI CANTT 10

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete all as specified and directed

M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) casing caping/conduit pipe including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

All as per the description of srl item No 2 above item but wiring with 2.5sqmm copper wire and 1.5sqmm earth wire for socket out let 16 amps on independent board

M&L for point wiring concealed type with 1.5 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic suitable size PVC conduit complete with all PVC conduit accessories suitable for modular type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings. Note:- 1. Rates deemed to be included for GI metal flush box reqd modulars size, modular cover inner and outer plates, blanking plates etc complete 2. Modular switch, sockets, Bell push measured and paid separately under relevant items.

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

All as per the description of srl item No 4 above item but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

S&F switch piano flush type 5/6 amps single pole one way 230 volts complete all as specified and directed

S&F switch piano flush type 15/16 A single pole one way 230 volts complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin 5 amps flush type 230 volt complete all as specified and directed

S&F socket outlet 2 in 1, 3/6 pin 15 amp flush type 230 volts complete all as specified and directed

S&F bell push, flush type 5 amps 230 volts complete all as specified and directed

S&F electronic dimmers flush type 120 watt, 230 volt complete all as specified and directed

S&F ding dong bell, AC, 230 volts, single pole complete all as specified and directed

S&F lamp holder, 230 volt AC, PVC / polycarbonate type of angular shape with back plate suitable for batten fittings complete all as specified and directed

S&F ceiling rose, 6 amps, 250 volts, AC with three terminals and PVC / polycarbonate insulated body of 50mm x 25mm size complete all as specified and directed

S&F modular switch 6 amps, one way, one module 240 volts complete all as specified and directed

S&F modular socket, 3 pin 6 amps,240 volts, 2 module complete all as specified and directed

S&F modular switch 16 A, 1 module,240 volts complete all as specified and directed

S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete all as specified and directed

S&F modular Bell push 6 Amps, one module 240 volts complete all as specified and directed

S&F modular fan regulator, step type, 120 W, AC, 230 volts, 2 module complete all as specified and directed

M&L in repair for two single core (submain) PVC insulated cable with 4sqmm nominal cross sectional area 1100 V,stranded copper conductor, multistranded, and one single core green PVC insulated 4sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and directed. Note:- Two run for neutral end phase and one run fpr continuous earth wire alongwith PVC condust shall be measured as one unit length

All as per the description of srl item No 21 above item herein before but with 6sqmm two runs and 6sqmm one run as earth wire

All as per the description of srl item No 21 above item herein before but with 10 sqmm two runs and 10sqmm one run as earth wire

S&F in repair MCB DB, single pole and neutral with 200 amps rated bus bar, 230 volts, glazed, double door type, 4 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete all as specified and directed

S&F in repair MCB DB, single pole and neutral with 200 amps rated bus bar, 230 volts, glazed, double door type, 8 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete all as specified and directed

S&F in repair MCB DB, single pole and neutral with 200 amps rated bus bar, 230 volts, glazed, double door type, 12 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete all as specified and directed

S&F in repair of factory made distribution box 4 way, AC, TP & neutral metal enclosure, glazed double dooor, 415 V, AC, concealed type with suitable bus bar, neutral link, earth link suitable complete all as specified and directed

S&F in repairs for MCB TPN, 240 Volts, AC, 32 to 63 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete all as specified and directed

S&F in repairs for MCB, DP/SPN, 240 Volts, AC, 40/63 amps of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and directed

S&F in repairs for MCB SP, 240 volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete all as specified and directed

S&F in repair of hylam sheet cover with brass screws , cup wahser and cutting of grooves 18/24 modules for switchs,socket and regulator etc complete. Note: 1. Rates deemed to be included for removing of exist connection in the switch board and after repair the same is to be refixing properly. 2. Switches,sockets,regulators to be measured and paid separetly under relevant item.

All as per the description of srl item No 31 above item description but 10/16 modules complete.

All as per the description of srl item No 31 above item description but 03/04 modules complete.

All as per the description of srl item No 31 above item description but 01/02 modules complete.

S&F in repair of exhaust fan of strudy engineering plastic complete with louvers shutters, voltage 230V, 50 Hz RPM 1200, copper winding of sweep 250mm complete all as specified and directed. Note:- Noise level should not be more than 50db.

S&F in repair LED batten type fitting (Lumen efficancy > 110lm for surface/wall mounted 20/22 W,230V,6500K integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws, gutties etc.and removing the unserviceable fitting and all as specified and directed.

S&F in repair LED batten type fitting, lumen efficancy > 110lm for surface/wall mounted 9/10W,230V,6500K integrated electronic driver completely pre wired, LED 2 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws, gutties etc.and removing the unserviceable fitting and all as specified and directed.

S&F in repair surface / recessed type LED type, lumen efficancy > 110lm LED panel type 36W,230V complete with driver full window glarefree opal diffuser LED panel of size 2ft x 2ft with CRCA powder coated white housing, CDL/warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the unserviceable fittings and all as specified and directed.

S&F in repair surface / recessed type LED panel type, lumen efficancy > 110lm 36W,230V complete with driver full window glarefree opal diffuser LED panel of size 4ft x 1ft with CRCA powder coated white housing, CDL/warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the unserviceable fittings and all as specified and directed.

S&F in repair indoor decorative wall light fixture suitable, lumen efficancy > 110lm for 10W LED lamp, 230V for soft light ambiance, made up of polycarbonate, spiral B22 base lamp holder used,globe shape, including LED lamp 10w (warm/CDL type) and remove the unserviceable fittings and all as specified and directed.

S&F lighting fixture wall mounted LED bulk head sensor type luminaire 9/10W, 230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting brackets & accessories as required with connections and remove the unservicable fittings and all as specified and directed.

S&F in repairs for building security light LED luminaries, lumen efficancy >110lm with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 66 protection and 30/45 watt including taking down old unserviceable one all specified and directed

S&F in repair Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 15 watt, CDL/warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the unserviceable fittings and all as specified and directed.

S&F in repair indoor recessed/surface type mounted sensor based LED luminaries round/square type light weight plastic body downlight fitting 5/6 watt, CDL/warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the unserviceable fittings and all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, angle iron 40mm x 40mm x 3mm frame for pit cover including testing on completion complete all as specified and directed.

S&F in repair of 300mm dia, 900 RPM, exhaust fan, heavy duty with louver shutter, frame, blades complete and unserviceable exhaust fan depositing in E/M store yard all as directed Note:- Noise level should not be more than 50db.

All as per the description of srl item No 46 above but 380mm sweep

Supply, installation, testing and commissioning in replacement of 1200 mm sweep, BEE 5 star rated, ceiling fan with brush less direct current (BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete . and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed Make - Havells model No efficiencia Neo (BLDC 26W), Orient Model AEON, Crompton Energion HS

Supply and fix in replacement of electric water heater, storage type 25 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed (Note : Old/ unsvGeysers to be deposited in MES store) Make : Racold – Omnis R, Orient – Urja + 25 Ltr, Havells- GHWAMGSWH025

S&F in repair of desert/air cooler of body size 25" x 25" x 32", made out of corrosion resistant, 18 SWG GI sheet duly powder coated paint with 500mm sweep copper wound fan motor kit 180 watt with metallic blade, ISI marked, 1400 RPM, 230 volt AC, tank capacity not less than 100 ltr, including plastic submersible pumps, electronis fan regulator with P/switch, desert cooler to be fitted with 6mm thick plywood to cover the gap as required size at existing window and old unsv desert cooler depositing in E/M store yard complete all as directed

S&F post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Removal of existing unserviceable fitting, supply and fixing garden light fitting 10/15 watts, inverted pyramid tipod type IP65 rated LED bollard light including of brick/PCC work all as specified and directed.

S&F in repairs of rigid non metalic 25mm dia PVC conduit with all ftgs tees, bends, elbows, reducers, bell mouth, saddles, pipe hooks complete all as specified and directed

S&F in repairs of GI flexible conduits 25mm dia with check nuts and clamps and accessories complete all as specified and directed

M&L for PCC 1:3:6 type C1, using 20mm grade curshed stone aggregate as in foundation, for coping, filling andmass concrete with cement plastering fair finishing all as specified and as directed.

M&L in repair for two single core (submain) PVC insulated cable with 1.5 sqmm nominal cross sectional area 1100v, stranded copper conductor, multistranded, and one single core green PVC insulated 1.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and directed

S&F in repairs for large area flood lighting system LED type IP 66, pressure die cast housing, with heat resistant tempered glass for protection with surge protection system, 100/120 watt including taking down old unserviceable one all specified and directed.

MK Enterprises (BID ID -3422350)

Shiv Enterprises (BID ID -3429015)

NEETU TRADERS (INDIA) (BID ID -3428641)

J V ENGINEERS / JAI SINGH (BID ID -3426201)

PRABHAT ENGINEERING SOLUTION AND SERVICES (BID ID -3428598)

M/S ADHIKARI CONSTRUCTION CO. (BID ID -3425205)

M/s Prakash Enterprises (BID ID -3428542)