Construction of Community Hall at Popra Pandit Raghunath Murmu Smriti Sangha under Jatradanga G.P., Mouza- Mohammadpur, J.L. No. 78, Plot No. 282, within Old Malda Dev. Block, Malda. (Activity Code-127284301) ).Sl.no-37

Earth work in excavation foundation trenches in all sorts of soil. Depth of excavation not exceeding 1.5 m.

Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm. including watering and ramming etc. layer by Layer complete. Earth obtained from Excavation of foundation.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level filling joints with powdered earth or local sand.

Filling in foundation trenches or plinths by silver sand in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. Including cost of sand (Payment to be made on the basis of measurement of finished quantity of work)

Cement concrete with graded stone ballast 40 mm down excluding shuttering in ground floor 1:3:6

1st class brick work in cement morter 6:1 in foundation and plinth in foundation in ground floor

1st class brick work in CM 6:1 in super structure ground floor

125 mm thick brick work in cement morter 4:1 in ground floor

Nominal Mix Cement concrete (1:1.5:3) with graded stone chips (20 mm down) excluding shuttering and reinforcement if any, Rajmahal variety in ground floor.

MS reinforcement work with tor steel including cutting bending binding and placing in proper position etc. complete in ground floor

Hire and labour charges for shuttering and centering including stripping off after completion of work in ground floor

MS or WI ornamental grill of approved design joints continously welded with MS, WI flat bars for windows railing etc. fitted and fixed with necessary lugs and screws (i) Grill weighting above 10 Kg/Sq. Mtr. and upto 16 Kg/Sq.Mtr. Gr. Floor.

Collapsible gate with 40 mm x 40 mm x 6 mm tee as top and bottom guide rail 20 mm x 10 mm x 2 mm vertical channel 100 mm apart in fully stretched position 20mm 5 mm flats as collapsible bracing …. making good damages in ground floor

Supply fitting fixing windows and ventilator with or without integrated grill ….. With non friction projection type box type hinges glazing clips lugs locking bracket handle plate etc. ……… all respect excluding glazing in ground floor

Supplying best indian sheet glass set in putty and fitted fixed with nails and putty complete 4 mm thick. Gr. Floor.

Two point nose steel handle including fitting fixing in ground floor

Steel peg stay 300 mm long including fitting fixing in ground floor

10 mm thick cement plaster with cement morter 1:4 in ceiling in ground floor

15 mm thick cement plaster with cement morter 6:1 in out & inside wall in ground floor

20 mm thick cement plaster with cement morter 6:1 in out & inside wall in Ground floor

Neat Cement running about 1.5 mm average thick in wall, dado, window, sills, floor drain etc. in all floors in ground floor

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white. GR. floor. in floor

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white. .in ground floor in wall

Supplying and laying true to l;ine and level vitrified tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white. GR. floor. in floor

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed . a) With 0.63 mm thick sheet

Suplying fitting fixing fibre reinforced polymer composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwitch core so as to impart monolitaheic composite structure as per approved technology of DST to satisfy IS 4020 door testing criteria 66 mm x 70 mm in ground floor

PVC door shutter 30 mm thick supplying fitting and fixing PVC door shutter of approved make & quality & shade in position the styles and rail of shutter will be made of rigid PVC multicavity hollow chamber of 59 mm x 30 mm section with 2 mm ….. The rate is exclusive of cost of hinges hasp bolt tower bolt etc. in ground floor

Wood work in Door and window frames fitted and fixed complete. Sal Malaysian

Supplying fitting fixing M S Clamp 40 mm x 6 mm, 250 mm

Panel shutters of Door and Window including fitting fixing the same inposition. Ordinary Teakwood 40 mm thick shutter.

Iron butt hinges of approved quality fitted and fixed complete with steel srews

Iron socket bolt of approved quality fitted and fixed complete

White washing including cleaning and smoothening surface thoroughly. Two coat

Applying decorative cement based paint to wall etc. as per manufacturers specification including cleaning and smoothening surface throughly - 2 coat in ground floor

Priming one coat on timber or plastered surface with synthetic enamel/oil bound primer of approved quality, i.e., smoothening surface by sand papering etc. in ground floor,

Painting with best quality synthetic enamel paint of approved make and brand smoothening surface by sand papering etc. i.e., …….. Using of approved puttty etc. 2 coat on wooden surface with other than hi-gloss of quality in ground floor. (b) Metal surface (2 coat) in ground floor

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. a) For depth upto 150 metre. i) 100 mm dia. boring etc.

50 mm dia

Supply of PVC pipes & Fittings Schedule 80 ( medium duty ) conforming to ASTMD-1785 and threaded to match with G.I. pipes as per IS 1239. 100mm dia

50 mm dia

Supplying PVC pipe strainer with brass net & jacketted of approved quality. (Heavy Type) (ii) 50 mm dia.

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(ii) 50 mm dia.

Supplying and installation of approved make and brand Sum-mersible pump including connecting cable panel etc. all complete KSB/CRI/Cromption. 1HP

Supplying and installation of approved make and brand Sum-mersible pump including connecting cable panel etc. all complete KSB/CRI/Cromption. 1HP

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(b) 1000 litre capacity

Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground (A) For Exposed Work a) ii) 15 mm dia. medium quality

b) ii) 20 mm dia. medium quality

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). vii) 25 mm dia

(B) For Concealed Work (a) 15 mm dia. medium quality

(viii) 20 mm dia

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). vii) 25 mm dia

(viii) 20 mm dia

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm

Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (B) 'S' Trap(iii) 100 mm

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing bib cock or stop cock.(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

Supplying, fitting and fixing bib cock or stop cock.(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm

x) Bend 87.5º

(ii) Plain Tee

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.(A) Above ground

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mm

Supplying, fitting and fixing porcelain soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mm

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats ofapproved paint.(ii) 550 mm X 400 mm size

Supplying, fitting & fixing Aluminium domical grating.(iii) 100 mm

Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials (excluding the cost of master trap only). (i) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 150 mm dia. of approved makeA) With Pakur variety. (SAIL/TATA/RINL

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. (i) For 20 users A) With Pakur variety.

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(Other than SAIL/TATA/RINL)

Add For Electrical Works @ 3.0%

Sub Total