SPECIAL REPAIR TO BLDG NO P12 FAM II WARD AT MH AND PROVN OF CERTAIN REVENUE AND MINOR WORK IN AGE BR II UNDER GE DANAPUR CANTT

Amount

Dismantling of floor, walls tiles including bedding but backing and rubbish off permises complete all as specified and directed.

M&L for 10-12mm thick light shade vitrified ceramic tiles (Square/rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floors etc, set & jointed in neat cement slurry and pointed in coloured cement to match the tile over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make : Orient/ Somany/Johnson/Kajaria

M&L for 10-12mm thick dark shade vitrified ceramic tiles (Square/rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floors etc, set & jointed in neat cement slurry and pointed in coloured cement to match the tile over and including 15 mm thick screed bed in cement mortar 1.6 complete all as specified and directed. Make : Orient/ Somany/Johnson/Kajaria

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match the tile over and including 15 mm thick rendering in cement mortar 1.6 complete all as specified and directed. Make -Orient/Somany/Johnson/Kajaria

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc complete all as specified and directed

M&L for RCC as in kitchen platform, shelves type B-0 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concret complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or secur complete all as specified and directed.

M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished ) in steps, floors, jambs, pillar, window cills, cooking platforms and like inncluding 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. (Note: Edges of slab shall be rounded off)

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed

M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in cement mortar (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed

All as per item No 15 above but exc 1.5 Sqm but n.exc. 4 Sqm complete all as specified and directed

M&L for cutting openings of brick wall built in cement mortar or cement lime mortar, through brick wall for door, window and other openings or enlarging existing openings, converting window into door opening, ventilators etc or cutting out defective brick work for under pinning, including removing rubbish from site complete all as specified and directed

M&L for forming jambs in Cement mortar 1:4 to openings (to foregoing item) including cutting, toothing and properly bonding into old work. also facing, jointing and pointing to match existing work, complete all as specified and directed.

S&F powder coated aluminium door shutter side hung in single or double leaf with frames following specification:- (a) chowkhat frame of size 63.00 x 38.10 x1.22 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM (c) Top and Middle rail of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM (d) Bottom Rail of size 114.30 x 44.45 x 1.29 mm @ 1.139 KG/RM (e) Partialy 9mm thick prelaminated particle board both side decorative (f) Partialy 5 mm thick tinted glass. (g) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass. (h) Two No.Disk Type Aluminium handle 200 mm long. (i) One No. Mortice cock and joing cleat.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar / Sandhu / Samrat

S&F 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall complete, incl taking down old cistern of any description. Make : Prayag/Parryware/Cera/Commander

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S&F anodised / powder coated aluminium grill for window ventilators (diamond shape of approx size 100 x 100 mm) made out of aluminium channel of size 4x5mm as approved by GE complete all as specified and directed.

S & F designer toughened glass of thickness 12 mm thick (including cutting holes, edges rounded, and etching works etc.) for medicine counter all as specified and directed by Engineer-in-Charge

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over one coat of primer including 3 mm thick Birla/ JK wall putty complete all as specified and directed.

M&L for applying two coat of cement base paint on newly plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified.

M&L for two coats of weather coat paint over a coat of primer on new surfaces on wall including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L Cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in levelling course, roof padding, coping, similar items, etc complete including necessary scaffolding and demolition of existing coping complete all as specified and as directed (Note : The contractor may please be included rate of scaffolding at any height)

Taking up or down 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed

Taking up or down 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed

S&F 15 mm bore tubes, medium grade, galvanised, with all fittings and fixed to walls and ceilings or laid in floors etc. complete all as specified and as directed

S&F 20 mm bore tubes, medium grade, galvanised, with all fittings and fixed to walls and ceilings or laid in floors etc. complete all as specified and as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directred

Dismantling of PVC water tanks of 1000 ltrs capacity including all fittings such as nipple, float valve etc complete all as specified and directed

S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed

S&F nipple suitable for HDPE water tank (min weight 15mm-38gms) complete all as specified and directed

S&F nipple suitable for HDPE water tank (min weight 20mm-45gms) complete all as specified and directed

S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed Make : Prayag/polytuf

S & F 15 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand complete. Make - Cera/Jaquar/Parryware/Hindware.

S&F sink with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm.

S&F white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.

S&F bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair brass chromium plated health faucet for EWC with 15 mm dia PVC pipe 1.00 m long including nut/washer complete all as specified and directed.

S&F in repair Overhead Shower 100mm dia Round Shape Single Flow (ABS Body Chromium Plated with Gray Face Plate) with Rubit Cleaning System including fixing to steel pipe of 15 mm dia or union.

S&F in replacement of stainless steel soap dish, of standard size and shape complete all as specified and directed.

S&F CP grating 100 mm size (ISI Marked) complete all as specified and directed.

S&F steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete as specified and directed.

Taking down CI / PVC (SWR) pipes of any size or pattern including all fitting fixed to wall, floors, etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F stack clamps for 110mm dia pipe made out of 50mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC (SWR) 110 mm bore bends of any radius with door/without door complete all as specified and directed.

S&F PVC (SWR) 110 mm PVC junction single (Single 'T') equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for door etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b) complete all as specified and directed.

S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S & F 150 mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm long Aluminium handles of extruded section, fabricated type and fixed complete all as specified and directed.

S & F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and directed.

Taking down shutters of any description n exc 1.00 Sqm each and refix in same opening after complete necessary repairs required as on ground complete all as specified and directed.

All as per item No. 69 above but exc 1 Sqm & not exc 2 Sqm each complete all as specified and directed.

M&L cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.

M & L 25 x 3 mm flat Iron as in hold fast etc complete all as specified.

S&F GI wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified and directed.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as specified and directed.

M & L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

S&F mild steel conduit curtain rod with PVC coating fancy type drapery rod 20 mm dia including two Nos of bracket of any colour as approved and fixed with bracket complete all as specified and directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets complete all as specified and directed.

M&L powder coated Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for 12 mm thick gypsum board of size 600 x 600mm fixed to powder coated GI framework frame work as in ceiling flat or sloping conforming to IS -14862 complete all as specified & directed.

Boring holes 3m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft / loose of soil complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for plain cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for 40 mm thick Cement Concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instruction complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Spreading and leveling of soil in layers not exc. 25 cm thick including well ramming and watering as required complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m sapn and like complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includ.

Supply only liquid water proofing compound complete all as specified.

M & L for 10 mm thick rendering on fair faces of brick /concrete surfaces of ceiling in CM (1:3), finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for 75 mm thick cement concrete1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

S & F of steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar complete all as specified and directed.

S & F Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part–II (2010) complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for insertion of hold fast including necessary formwork etc. complete all as specified and directed.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 350 mm X 250 mm X 7 mm thick or 450mm X 350mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F 25 mm bore tubes, medium grade, galvanised, with all fittings and fixed to walls and ceilings or laid in floors etc. complete all as specified and as directed.

S&F 25 mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished rough to receive the floor tiles, etc complete all as specified and directed.

Supply and fixed Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, complete all as specified.

S&F pillar taps cast copper alloy with capstan head chromium plated screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screw shank and fly nut screwed for iron pipe of 15 mm bore complete all as specified.

S & F of 15 mm bore stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L Vitreous china urinal half stall type, white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, waste pipe, PVC connection grating and union for discharge pipe complete.

S&F CP urinal spreader for fixing with 15 mm bore pipe complete all as specified and directed. Make :- Hindustan/Parryware/Equivalent make.

S&F 500 ltrs capacity rotational moulded polythene water storage tanks (cylindrical vedrtical with colsed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S&F PVC (SWR) 75 mm bore bends of any radius with door/without door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia. outlet complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 over roof slab mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Make : TATA/JINDAL

S & F of mild steel work as in framed brackets of not exc. 10 Kg each made of angle or Tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessry, gusset plates, riveting etc. conforming to

S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S&F CP grating doom 125 mm dia with waste hole of ISI marked complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surfaces of walls ect complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding modular steel box/plate for mounting modular switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium /AKG.

One light / fan point controlled by one switch.

One bell point controlled by one bell push

One 5 Amps socket outlet point controlled by one switch on same board with other switches.

One 5 Amps socket outlet point controlled by one switch on independent board.

~Ditto~ all as per item No. 138.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply & fixing bell push single pole, 6 amps, 230 volts, flush type complete all as specified and directed.

Supply and fixing Lamp holder, insulated body with back plate suitable for batten/angular fittings complete all as specified and directed.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorative bulk head fitting with driver and prewired and necessary electric connection with pvc insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and directed. Make : Havell's Cat No. HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.

Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/Philips/Crompton.

Supply and fixing in repair LED tube rod 18 watt 230 volt T8 type made up of polycarbonate with in built electric electronic driver both sided connection with metal heat sink complete fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bajaj/Philips/Wipro/CG.

Supply and fixing LED street light fitting 1 x 25 Watts capacity including all accessories and lamps complete with bracket of suitable size complete with flat iron clamps two Nos fixed in the wall with grouted nut, bolts complete all as specified and directed. Make : CG/Bajaj/Havells.

Supply & fixing factory made Sheet metal and neutral enclosure two pin with earth plug and socket complete with one single pole MCB 240 volts, 20 amps complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing high performance metal body exhaust fan 450 mm sweep, 1400 RPM 240 volts AC 50 Hz, heavy duty with suitable size MS sheet louver including connecting up to ceiling rose/ connector by three core sheathed copper conductor cable of suitable size including cutting wall and making hole in round shape of suitable size making good the disturbed surface to its original specification from both inner and outer side of wall and four nos suitable size nuts, bolts and washer with proper grouting in wall complete all as specified and directed. Make : Havells, Cat No: Turbo Force SP or equivalent model of Usha/Crompton Greaves/Bajaj.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor,drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green colour PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed.

~ditto~ all as per item No. 154.00 but with two single core 4.0 Sqmm size with 2.5 Sqmm cable as earth conductor complete all as specified and directed.

M&L for 25 mm dia PVC conduit having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification) with all accessories for sub main wiring / telephone cable / internet cable complete all as specified and directed. Make of conduit : Plaza/Prestoplast/Modi.

S&F sheet metal enclosure for 8 way distribution boards (DB's), double door, single pole and neutral with 200 Amps rated bus bar, IP-20 protection suitable for fixing MCB's/Isolators complete all as specified and directed. Make : Legrand/Schneider/Siemens.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make : Legrand/Schneider/Siemens.

Supply and fixing with MCB SPN 5 to 32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing in repair double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing in repair MCB TPN 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/Siemens.

Supply and fixing Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.

M/S Priya Trading Agency

SINHA CONSTRUCTION