Installation of Submersible with Purified water tank in front of Rimol Kishor home at Mouza- Jamalpur of J.L. No- 185, Plot No.- 122 undrBabupur G.P. of Gazole Dev. Block, Malda. Activity code-121205605 Sl.No-06

Labour for boring tube will of required dia by water jet System through any type of soil strata including hire & labour charges for boring pipe , scaffolding , tools & plants as necessary and taking out them and lowering pipes ,strainers , blind pipe etc. & filling and fixing the same complete including bucket washing and other incidental works in this connection . The Tube Well should have an maximum 50 mm. gap in between the out side of the tube well and the bore.A) For the depth upto 150 m. For 50 mm. dia Tube-well with top enlargement of 100 mm. diai) 100 mm.dia boring

ii) 50 mm. dia boring

Supply of PVC pipes and fittings Schedule 80 ( medium duty ) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS : 1239 ( Part-1 )a) 100 mm dia

b) 50 mm dia

C) 40 mm dia

Supplying high density polythene stainer of approved make with adapter conforming to I.S. specification. 50 mm dia.)50 mm dia

S/F/F steel cutter piece up to 450 mm long with socket. 50 mm dia.

Supplying and installation of K.S.B. Sub-mersiable pump including connecting cable panel etc. all complete i ) 1.00H.P. capacity ( Single phase )

Supplying, fitting and fixing PVC insulated & sheathed Flexible three core flat cables of area 2.5 mm sqm as per stranded & bunched Type A of IS 5831/1984 & Sheathing to IS 8130/1984 for higher flexibility. are used to connect underwater as per ST I Type of IS 5831/1984.

Supplying , fitting and fixing Single Phasing VOLTAGE SENSING PREVENTER & AUTO START UNIT Submersible pump control panel (1/2 H.P. TO 2.0 H.P.range ) of L & T brand of an influential electronic circuit which keeps three stage worked electrical machines from single stage cut off, stage succession inversion and lopsided voltage.

Supplying , fitting and fixing G.I. cap at top.

S/F/F check valve ( vertical ) G.M. tested to 21 kg. per sq.cm./40 mm

Supply of PVC pipes and fittings Schedule 80 ( medium duty ) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS : 1239 ( Part-1 )a) 100 mm dia

Washing and developing tube well with air compressor pump and engine for 8 ( eight ) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with V-notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect.

Packing the annular space between the outside of the tubewell pepes and strainers and bore with pea size washed gravels of approved quality having size from 2 mm. to 5 mm. the size approved by E.I.C. including cost of materials labours & equipment complete

Quotation & lectric main line connection Charge including distribution wire In 1.1 KV grade Single core standed FR PVC Copper …................ In this Connection

Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.

Cement Concrete with graded stone ballast (40 mm size) excluding shuttCement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-Charge In 6:3:1 proportion. complete./Pakur variety

Ordinary Cement Concrete ( Mix 3:1.5:1) with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any as per IS 456-2000. Using Stone material of Rajmahal variety.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel.Engieer-in-Charge.

Hire and Labour Charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. Using 25 mm to 30 mm thick wooden shuttering as per direction of EIC, complete.(a) 25 mm to 30 mm thick wooden shuttering without staging in foundation

(b) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-InCharge

125 mm thick Brick work with 1st class brick in Cement Mortar (4:1). inGround Floor

M.S. or W.I. ornamental grill of approved design joints continiously welded with M.S., W.I. flats and bars for windows, railing etc fitted & fixed with necessary screws and lugs. i) Grill weighing upto 16 kg/Sqm.

Plaster ( to wall, floor , ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary. 10mm thick plaster in sand cement morter (1:6)

B ) 15 mm thick plaster in sand cement morter (1:4)

Neat Cement punning (about 1.50 mm thick) on wall, dado.

Artificial stone in floor, dado, Stair case etc. with cement concrete ( 4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement ( as necessary ) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before floring works using cement @ 1.75 kg. per sqm. all complete including all materials and labour. 3 mm thick topping ( high polishing grinding on this item is not permitted with ordinary cement). In ground Floor. 25 mm thick.

Supplying, fitting fixing of 1st quality Ceramic tiles of any size having mat finish in walls and floors including borders to match with the existing work, set in sand cement mortar (4:1) & 1 : 6 in wall & floor respectively including backing concrete (1:2:4) & 4 nos of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles. (a ) With Sand Cement Mortar (1:4) 20 mm thick & 2 mm. thick cement slurry at the back side of tiles using [email protected] kg/sqm. & joint filling using white cement slurry @ 0.20 kg/sqm. in Ground Floor (i ) Area of each tiles upto 0.09 sqm./ Other than Colour decorative including white

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayera) 2000 litre capacity

Labour for hoisting Plastic water storage tank()avobe 1500ltr. Upto 5000 ltr capacity

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)A ) For Exposed work a) 15 mm dia

b) 20 mm dia

c) 25 mm dia

d) 40 mm dia

Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg. per sqm. ( for water line only ) a) 40 mm dia

B) 25 mm dia

C) 20 mm dia

Supplying , fitting and fixing chromium plated Bib Cock short body ( Equivalent to code No.511 & Model-Tropical/Sumthing special of ESSCO or similar brand )

upplying fitting and fixing horizontal type 60litre capacity oil type Air Compressor with 3 H.P. Motor inclusing necessary cable & fittings etc. all complete/Single phase

Supplying fitting and fixing Cylindrical Oxidation Chamber of M.S. type for iron removal Filter of Shell thickness 5 mm of capacity greater than 1000 litre per housr & rate of flow is 10 cum per hour etc. all complete.

Supplying FRP Vessel made up of high performance resin and having polytheylene inner shell and fiberglass with epoxy resin outer shell of capacity 49 gallon & volume 185 litre. It has outstanding performance and durability no chance of any leakage & Corrosion resistant product of one year warranty etc. all complete. i) Size 16'' (Diameter)x65'' (Height)

Supplying UPVC Riser pipe of standard quality of size 25 mm to 125 mm dia of 3 metre to 6 metre in length & white in colour etc. all complete.

Supplying 25 NB Multi port valve (MPV) for resin water softener for any Brand etc. all complete.

Supplyin Micron Filter made of stainless steel materilsa for…............... 30cm & Silver in colour

Suppying SWS 500LPH stainless Steel Ultravolet Water Disinfection System

Supplying Automatic Commercial FRP RO plant of Capacity 1000-2000 litre per hour with 1.5 Kw motor Power

Filling of filter media like Gravels, Silica Sand, Charged Media, silica Carbon and Anthracite into the Cylindrical type Multigrade Filter in proper order with required quantity as per instruction of Engineer in Charge.A) With pea size washed gravels of approved quality having size from 2 mm to 5 mm.

B ) Sand ( Coarse )…………………

C ) Sand ( Treated )…………………

D ) Arsenic removal Granulated Ferric Hydroxide

E ) WATER CLINIC Granulated Activated Carbon For purification and Air Purification/Pure/Activated charcoal Rocks/Eliminate Tank Odurs/Remove Harmful Bacteria

F ) Manganese dioxide (MNO2)

Labour charges for fitting and fixing raw water line through Oxidation Chamber by air Compressor after that Oxidised water passes through FRP Vessels (4 stages), Micron Filter & UV System with required UPVC pipe of necessary dia socket, reducing tee, short piece etc. fitted with holder but clamps including cutting pipes making threads, fitting, fixing & filling the media into vessels in proper order with one year free servicing & warantees of whole Treatment Plant etc. complete.

Priming one coat on steel or other metal surface with synthetic enamel/oil bound primer of approver quality including smoothening surfaces by sand papering etc.

Priming one coat on steel or other metal surface with synthetic enamel/oil bound primer of approver quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.a) On timber or plastered surface with super gloss (hi-gloss), Two coats (With any shade except white).

b) On steel or other metal surface: with Super Gloss (Hi-gloss), Two coats (With any shade except white

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..

Sub Total