Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
13 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
12 conditions · 1 needing a document upload
The contractor should have valid Electrical Contractor License issued by Govt. and submit along with tender document. If valid Electrical Contractor License is not submitted along with tender document, then offer will be summarily rejected.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
8 conditions · 2 needing a document upload
The tenderer shall submit all relevant documents as detailed in para 14 &18.10 of Tender Form (Second Sheet) of Part I of GCC work-2022.
The tenderer shall submit copy regarding status of firm i.e. sole proprietorship, partnership, Company, Society/Trust etc. and also submit a power of attorney and other relevant documents as detailed in Para no. 15 of Tender Form (Second Sheet) of Part I of attached GCC-2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor should quote only the above/below percentage on estimated value, in the space provided at web portal for the purpose & nowhere else. Financial & Technical conditions quoted at any place other than prescribed space shall not be entertained while evaluating the offer.
Tenderer are required to go through the documents attached along with the tender and submit their bids accordingly.
Providing AT supply to HABD and provision of AT cables, CLS panels and associated items at various locations over BKN Div.
29-El-BKN-E-Tender-25-26~NWR
29-El-BKN-E-Tender-25-26
Open
Works - General
6 Months
Bikaner, Rajasthan
₹0
₹59,000
13 Jan 2026
18 Dec 2025
30 Dec 2025
37 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 29,49,282 | ||
| — | 5.00 | — | — | ||
| Supply, fixing and commissioning of Automatic supply change over colour light signaling panels, 60 Amp for 3 source single phase supply suitable for 10 KVA/ AT as per RDSO Specification No. TI/SPC/PSI/CLS/0020 (12/02) with A&C slip No. 1 to 4 or latest (CORE/RDSO approved source only) as per spec. | — | — | — | 2,39,015 | |
| — | 2.00 | — | — | ||
| Supply, fixing, and commissioning of automatic change over control and distribution panels for CLS, 150Amp. , 240Volts Capacity, 50Hz, for 25KVA AT as per latest RDSO spec no.TL/SPC/PSI/CLS/0020 with A&C slip 1 to 4. CORE approved drawing no. : ASCOS/CORE/2005/01Rev.02 or latest. | — | — | — | 2,74,122 | |
| — | 20.00 | — | — | ||
| Supply and fixing of single phase DB 6 way with DP RCCB 25/16amp. 30mA, DP MCB16 amp. SP MCB 10amp. and SP MCB 6amp. All MCB should be of 'C' series with breaking capacity not less than 10 kA. Material should of reputed make and as per tech spec. | — | — | — | 94,080 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing and commissioning of RCBO 25A, double pole, 30mA with Earth leakage, overload and short circuit protection as per spec. | — | — | — | 47,580 | |
| — | 20.00 | — | — | ||
| Supply and fixing of 4 module metal enclosure for fixing of RCBO as per IEC 61439-3, Suitable for flush mounting and surface mounting with door for IP 54, similar to Legrand model no. 5077 91/93 of reputed make. | — | — | — | 12,320 | |
| — | 4000.00 | — | — | ||
| Laying, connecting, testing, Transportation and commissioning of 4 x 16 sqmm, 1.1KV grade, LT XLPE/PVC insulated PVC outer sheathed aluminum conductor armoured cable in trench/pipe/air as per spec. | — | — | — | 32,000 | |
| — | 5000.00 | — | — | ||
| Laying, connecting, testing , Transportation and commissioning of 2 x 70 sqmm, 1.1KV grade, LT XLPE/PVC insulated PVC outer sheathed aluminum conductor armoured cable in trench/pipe/air as per spec. | — | — | — | 35,000 | |
| — | 9000.00 | — | — | ||
| Supply of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness 3 mm, PN 6 under the road. | — | — | — | 5,76,000 | |
| — | 9000.00 | — | — | ||
| Laying of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness minimum 3 mm, under the road. The work involves laying of HDPE pipe. | — | — | — | 72,000 | |
| — | 8020.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 Mtrs. as per spec. (trench work may be on kuchha/pucca land and all type of soil as per site requirement and without protective layer of brick) Surface of trench shall be made good in all respect and satisfaction of site engineer | — | — | — | 3,04,760 | |
| — | 200.00 | — | — | ||
| Supply, laying and fixing of GI pipe medium "B" class (Blue) confirming to IS 1239 part-I for passing incoming and outgoing cable from ground through it size 38 mm dia. Pipe should be of reputed make. | — | — | — | 26,200 | |
| — | 500.00 | — | — | ||
| Laying of Spun/MS/GI/HDPE pipe 100mm to 200 mm by push through method in Railway yard/below track/Road. | — | — | — | 2,25,000 | |
| — | 500.00 | — | — | ||
| Laying of Spun/MS/GI/HDPE pipe 100mm to 200 mm by drilling of Horizontal bore by machine in Railway yard/below track/Road. | — | — | — | 5,98,500 | |
| — | 40.00 | — | — | ||
| Supply and fixing of junction box size 390/388x305/304x170mm comprising of SMP/FRP material with rubber gasket, padlock arrangement, zinc passivated earth bolt, etc. Make Sintex or similar with 4 no. aluminum busbar cap 200 Amp. Suitable for 415 volt supply requirement. The box shall be fixed robustly with clamps at pole/ wall as per requirement. All the material should be of good quality. | — | — | — | 79,840 | |
| — | 20.00 | — | — | ||
| Supply of unit maintenance free earth material as per RDSO Specs. No RDSO/PE/SPEC/PS/0/0109 ( REV.0 ) 2008 or Latest | — | — | — | 1,79,620 | |
| — | 20.00 | — | — | ||
| Installation of unit maintenance free earth material as per RDSO Specs. No RDSO/PE/SPEC/PS/0/0109 ( REV.0 ) 2008 or Latest | — | — | — | 75,660 | |
| — | 21.00 | — | — | ||
| Supply, installing, testing and commissioning earth electrode complete in all respect with perforated GI pipe medium "B" class (Blue) confirming to IS 1239 part-I length of 4 mtr., bore 50mm with all accessories like nut bolt, reducer nipple, wire meshed funnel and CC finished chamber covered by CI/RCC frame etc. Digging pit and refilling it with charcoal and salt in successive layers and connection with 8 SWG GI wire and as per IS:3043 and drawing and testing of earth resistance as reqd. | — | — | — | 41,265 | |
| — | 32.00 | — | — | ||
| Providing SH rail post 1.5 / 2.5 mtrs. Long for Precooling / Charging. Work includes cutting of 50 / 60 / 75 / 90 lbs capacity rails in pieces of desired length (1.5 / 2.5 mtrs.), digging of pit and erection of rail pole (Rails will be supplied by railway and is to be collected by contractor from concerned SSE). The rail pole shall be erected over a cement concrete bed (1:3:6) of 15 cm thickness and back filling of pit with excavated earth soil. The depth of the pit shall be 0.5 mtrs. or as directed by Site Engineer. These rail poles should be grouted properly. | — | — | — | 36,320 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCwithACS10.pdf
ATTACHMENT
29of25-26_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .