01/E.U.D.C.-Talkatora/2025-26

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

S.T. Pole 11 Mtr. Long.

11 K.V. 3X185 Sq.mm. XLPE Cable.

ABC (3X120+1X95+1X16 Sq.mm.)

L.T. XLPE Al. 3.5X400 Sq.mm. Cable.

L.T. XLPE Al. 3.5X240 Sq.mm. Cable.

L.T. XLPE 3.5X70 Sq.mm. Cable.

11 K.V. Out door Jointing kit suitable for 3X185 Sq.mm. cable.

11 K.V. Straight Through Jointing kit suitable for 3X185 Sq.mm.Cable

Top Channel 100X50X2240 mm.

Dropper Channel 100X50X2000 mm.

Stay set complete.

Earthing Complete.

11 K.V. on load Single Circuit two way RMU 1000 K.V.A. upto 3000.

Fabrication, Erection of Double Pole Structure on 11 mtr. long STP with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) 01 nos., Dropper Channel 100X50 mm. (2028 mm long) 01 Nos. with arrangment of fixing of 06 nos. 11 K.V. Pin Insulators. Cross Bracing set of MS Angle 01 Nos. Grouting of 02 Nos of STP with cement, sand and brick ballast in ratio 1:4:8 (2X0.9 Cu.Mtr) and making plinth upto the height of 300 mm from ground. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of both the poles.

Erection of Single Pole structure on 11 mtr. STP with fixing of necessary clamps and other accessories required for stringing along with plinthing, grouting & earthing of STP with cement, sand and brick ballast in the ratio 1:4:8 (0.9 Cu.Mtr each) upto the height of 300 mm. from the ground level. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect.

AB Conductor Stringing & sagging of 3 phase with necessary clamps, Eye hook, Suspension clamp, A-B type connector etc. on ABC New line as per RESPO specification and direction on E/I. ABC shall be supplied by department.

Laying of 11 K.V. XLPE Cable 3X185 mm2 in double circuit underground by drilling method. (11 K.V. XLPE Cable will be provided by deptt. only)

Construction of masonary plinth suitable for & up to 1000 KVA Transformer of size 2X2X1.2 Mtrs with complete civil material & 02 Nos.,100X50 mm, M.S Channel 2.0 Mtr. long and M.S Bar 8/10 SWG complete in all respect as per RESPO norms.

Placing of existed 990 K.V.A. healthy Transformer from J.E. store to newly constructed plinth with the help of crain and T & P.

Construction of plinth suitable for Distribution box (A-type) with complete civil material in all respect as per RESPO norms.

Construction of plinth suitable for Distribution box (B-type) with complete civil material in all respect as per RESPO norms.

Supply and installation of Distribution box (A-type) of size 2000(H)x1200(W)x650(D) m.m. with sheet thickness 02 mm Aluminium bus bar arrangment with 01 No. incommer of MCCB rating 400 amp. 02 Nos. outgoing rating 250 amp. & 02 Nos. outgoing with 100 amp. MCCB of current rating of protection class as per RESPO norms on newly constructed plinth. Making the both side connection from Transformer with fixing the necessary clamps and other required necessary material, complete in all respect as per RESPO norms.

Supply and installation of Distribution box (B-type) of size 1800(H)X1200(W)X650(D) mm with sheet thickness 02 mm with Aluminium bus bar arrangment with 03 phase+1 nutural. Incommer of 250 amp. (01 No.) and outgoing rating 100 amp. (04 No.) MCCB of current rating of protection class as per RESPO norms on newly constructed plinth. Making the both side connection from Transformer with fixing the necessary clamps and other required necessary material, complete in all respect as per RESPO norms.

Supply and installation of Distribution box (C-type), of size 450(H)X500(W)x200(D) mm. with sheet thickness 02 mm. with Aluminium bus bar arrangment with 03 phase 04 wire without MCCB as per RESPO norms with stand and necessary clamps and other required necessary material, complete in all respect as per RESPO norms.

Lay down the LT PVC cable of size 3.5X70/240/400 Sq.mm. for making the both side, connection from Transformer to "A" type Distribution box and "A" type Distribution box to "B" type Distribution box after fixing the necessary clamps Lugs and other material required for completion of work including carriage from store center.

Earthing of Distribution box (A,B,C type) with necessary clamps and other required necessary material, T & P complete in all respect as per RESPO norms.

Earthing of Neutral of Transformer/Pannel, Transformer/Pannel body/neutral and double pole by way of boring and lowering of perforated ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out continuous G.I. strip size 32X6 mm. from the cone to the ground surface where it will be connected with the perforated 'B' class G.I pipe 1.5" dia clamp from which Transformer neutral, body & D.P. connection being done by G.I. Strip as per RESPO specification. (All the material will be arranged by contractor at their own cost.)

Construction of Plinth for RMU of size 1.5X1X1 Mtr. With the help of Ist class brick and massonary in the ratio 1:4 cement & sand coarse, filling the structure of size 2 feet hight, completely as per norms with RCC top 1:2:2 cement, sand coarse, stone grit with M.S. Bar and M.S. Channel for resting RMU. (All material shall be supplied by contractor)

Fixing, erection, commissioning of 11 K.V. on load Single Circuit two way RMU 1000 K.V.A. upto 3000 on plinth. Making all arrangement and proper connection as per RESPO norms.

Earthing of 11 K.V RMU body/neutral by way of boring and lowering of ISI marked two Nos. of perforated 'B' class G.I pipe 1.5" dia 20 m deep from the ground level with solid cone at the lower end of G.I pipe. One end of G.I strip of size 50X6 mm. will be connected with neutral and body of the RMU/Transformer & other end will be clamped & welded with perforated 'B' class G.I pipe 1.5" dia as per UPPCL norms (All the material will be arranged by contractor at their own cost.)

Hoisting of 11 K.V. XLPE cable 3X185 mm2. along with 6" dia G.I. Pipe 03 meter long with required clamp etc. (All material provided by contractor)

Grouting and nozzeling of Stay set complete of size 16X1800 mm. with cement,sand, brick ballast 1:3:6 as per RESPO specification.

Dismentling and carriage of old material i.e. Transformer, rail pole, STP, L.T. Distribution panel, ACSR Weasel conductor, ABC & different associated material from old site to new site or J.E. dump store.

High pressure testing of 11 K.V. XLPE cable 3X185 mm2 up to hold 24 K.V. voltage by DC Generator/Cable testing machine. (All testing equipment will be arranged by contractor)

Fabrication, erection of wiremesh fencing of the size 3X5X2 m. with provision of M.S. Angle 65X65X6 mm, M.S. Flat 50X6 mm., wiremesh. The work is also including construction of retaining wall through massonary items and gate with loading arrangement.

Note :- 1- All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2- One carriage including loading/unloading from dump site to pit site is included in scope of work. 3- During execution of work all risk will be of the contractor. 4- Contractor will provide all T & P, vehicle and man power. 5- All the old and used material should be taken on book. 6- The quantity may be vary ±10%. 7- GST will be paid extra as legally applicable. 8-The work should be carried out under deposit head. 9-The work will be done as per norms of UPPCL/RESPO.

SYED TRADERS (BID ID -5329616)

AMAN ENTERPRISES (BID ID -5329403)