Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC H NO 816 NEAR GANDHI CHOWK KALKA 133302 HARYANA | KALKA | PANCHKULA | HARYANA | 133302 | ₹29.4 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹30.6 LRejected-Finance H NO 74 6 JUTOGH CANTT SHIMLA HP 171 008 | SHIMLA | HIMACHAL PRADESH | 171008 | ₹30.6 L | L2 | Rejected-Finance BIDDER NOT LOWEST |
| 3 | L3₹30.7 LRejected-Finance 1291 1ST FLOOR SECTOR 26 PANCHKULA HARYANA 134116 | PANCHKULA | HARYANA | 134116 | ₹30.7 L | L3 | Rejected-Finance BIDDER NOT LOWEST |
| 4 | L4₹34.3 LRejected-Finance 140 ANAND NIWAS SET NO 2 ENGINE GHAR SANJAULI SHIMLA 171 006 | SHIMLA | HIMACHAL PRADESH | 171006 | ₹34.3 L | L4 | Rejected-Finance BIDDER NOT LOWEST |
| 5 | L5₹35.6 LRejected-Finance | ₹35.6 L | L5 | Rejected-Finance BIDDER NOT LOWEST |
| Sl No | Description | Qty | Unit | m/s jupiter builders L1 | Pankaj Builders L5 | PRITPAL SINGH L4 | NSK TRADER L3 | M/S SHIV NATH ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified. | 29.02 | Cum | 150 ₹4,353 | 400 ₹11,608 | 600 ₹17,412 | 200 ₹5,804 | 200 ₹5,804 |
| 2.00 | M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub flooring complete all as specified. | 328.6 | Sqm | 105 ₹34,503 | 180 ₹59,148 | 200 ₹65,720 | 200 ₹65,720 | 125 ₹41,075 |
| 3.00 | M&L for Vitrified tiles Light shade of 7-8 mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc sat and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and as directed. | 68.76 | Sqm | 1,050 ₹72,198 | 1,200 ₹82,512 | 1,000 ₹68,760 | 900 ₹61,884 | 1,100 ₹75,636 |
| 4.00 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified. | 259.54 | Sqm | 850 ₹2.2 L | 1,200 ₹3.1 L | 1,000 ₹2.6 L | 900 ₹2.3 L | 1,100 ₹2.9 L |
| 5.00 | M&L 75 mm thick PCC 1:3:6 Type C-2 using 20mm crushed stone aggregate as in plinth protection and finished even and smooth without using extra cement complete all as specified. | 85.28 | Sqm | 300 ₹25,584 | 350 ₹29,848 | 400 ₹34,112 | 300 ₹25,584 | 500 ₹42,640 |
| 6.00 | Bitumastic filling, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, as in plinth protection complete all as specified & directed. | 32 | RM | 50 ₹1,600 | 80 ₹2,560 | 100 ₹3,200 | 50 ₹1,600 | 30 ₹960 |
| 7.00 | Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified. | 428 | Sqm | 15 ₹6,420 | 20 ₹8,560 | 40 ₹17,120 | 10 ₹4,280 | 45 ₹19,260 |
| 8.00 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 400 | Sqm | 750 ₹3 L | 850 ₹3.4 L | 800 ₹3.2 L | 750 ₹3 L | 745 ₹3.0 L |
| 9.00 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 28 | Sqm | 850 ₹23,800 | 900 ₹25,200 | 900 ₹25,200 | 750 ₹21,000 | 800 ₹22,400 |
| 10.00 | Dismantling wall and ceiling boards of any description or any thickness including cover fillets as directed. | 640 | Sqm | 10 ₹6,400 | 20 ₹12,800 | 10 ₹6,400 | 10 ₹6,400 | 45 ₹28,800 |
Updated dates
Tender Value
₹44.5 L
EMD Value
₹88,920
Closing Date
25 Mar 2026, 6:00 pmClosed
GE 863 EWS
GE 863 EWS, c/o 56 APO
GE/863/EWS-T-93 OF 2025-26 SPL REPAIR TO OTM ACCN BLDG NO T-295
2026_MES_754669_1
GE/863/EWS-T-93 OF 2025-26 SPL REPAIR TO OTM ACCN BLDG NO T-295
Open Tender
Civil Works
180 days
AVERIPATTI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 863 EWS
₹88,920
Yes
15 May 2026
27 Feb 2026
27 Mar 2026
27 Feb 2026
25 Mar 2026
13 Mar 2026
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified.
M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub flooring complete all as specified.
M&L for Vitrified tiles Light shade of 7-8 mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc sat and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified.
M&L 75 mm thick PCC 1:3:6 Type C-2 using 20mm crushed stone aggregate as in plinth protection and finished even and smooth without using extra cement complete all as specified.
Bitumastic filling, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, as in plinth protection complete all as specified & directed.
Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Dismantling wall and ceiling boards of any description or any thickness including cover fillets as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and directed
S&F Hollow PVC Wall Lining consisting of 5mm thick Wood Grain printed colour PVC sheet inclusive of solvent cement and fixing at site on wall/ceiling on PVC frame as per specifications and directed
Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement (with water proofing compound) complete all as specified and directed.
M&L two coats cement base paint on plastered surface including preparation of newly plastered surfaces complete all as specified.
S&F in repairs 19/20 mm dia curtain rails mild steel chromium plated with fixing brackets, stops, roller etc, complete all as specified and directed.
Taking down chowkats or frames(without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each.
Taking down chowkats or frames(without taking off shutters from the frame) area n exc 1.5 Sqm each.
Taking down shutter of any description exc 2 sqm each
Taking down shutter of any description exc 1 sqm each
S&F Anodised aluminium frame of doors, windows & ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos(150mm) in each doors, hinges, anodiesed aluminium snap beading screw etc. complete all as specified.
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle 100mm (1 no.) complete all as specified
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge
S&F 4 mm thick Aluminium composite Panel for door including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. complete all as specified
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm, each pane complete all as specified.
S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified.
S&F 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified.
S & F in repair butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified.
Hacking out old broken glass (any thickness) , size, quality or description ) from metal frame including punching or drilling out old glazing pins complete all as specified.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane complete all as specified.
S & F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.
S & F in repair aluminium hat pegs, solid body, 125mm to 175 mm complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.
S&F Mild steel work as in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates(Fe-410-W(Gde E-250)Quality-A) complete all as specified.
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.
S&F 2000 Ltrs capacity, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including 20mm ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all in repair as specified.
Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.
S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.
Fixing only 15 mm water tubes, any grade, to walls and ceilings or laying in floors complete all as specified.
Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.
S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.
Fixing only 20 mm water tubes, any grade, to walls and ceilings or laying in floors complete all as specified.
S&F in repairs bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube complete all as specified.
S&F in repairs 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles complete all as specified.
S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.
Supply only 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC connection 15mm bore with PTMT nuts and 450mm long complete all specified and directed.
S&F in repairs vitreous China Urinal, half stall type, white with 32mm bore PVC waste pipe of length 900mm to 1200mm and including urinal spreader of PTMT any colour for fixing with 15mm dia pipe including connection to flushing pipe and outgoing pipes with 32mm bore PVC waste pipe of length 900mm to 1200mm.
S&F in repairs CP tubular towel rail, 20 mm dia. 60 cm long between flanges complete all as specified.
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified.
S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection complete all as specified.
S&F Chromium plated jet for EWC complete all as specified.
S&F PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia, complete all as specified and directed.
S&F 110 mm bore, PVC (SWR) pipes single socketed/ elbow/ tee, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one complete all as specified.
S&F in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors after dismantling old one complete all as specified.
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.
S& F for 110mm PVC (SWR) bends complete all as specified.
S& F for 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.
S& F 75mm /110mm PVC (SWR) reducer in repair complete all as specified.
S& F 110mm PVC (SWR) vent cowl in repair complete all as specified.
M&L one coats of synthetic enamal paint to steel surfaces of any discription not otherwise described over 10cm width or girth preparation of old surfaces complete all as specified.
M & L for preparation of old plastered surfaces of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of cement based paint complete all as specified and directed.
M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as spd and directed.
S& F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.
M&L chequered cement concrete tiles 20cmx 20cmx 25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6
M&L for 75 mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone agg as in sub base of floor complete all as specified and as directed.
Excavation in trenches not exc 1.5 mtr wide or n.exc 1.5 mtr in depth for pipe line, drains, foundations of sewarage lines or manholes and like and getting out in soft/loose soil.
M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.
Demolition of precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles.
M&L 1:3:6 type C-1 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6.
M&L three coats of white wash on plastered surface including preparation of newly plastered surfaces.
Supply only integral water proofing compound
Returning, filling in, spreading, leveling watering and well ramming in layers n,exc 25 cm thickin soft/loose soil.
Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above starting point
M&L cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe 150mm bore after they are laid and tested as specified.
Demolition and breaking up drain pipes (salt, glazed ware, AC or reinforced concrete) (150mm dia) of any description set in cement mortar.
M&L 150mm internal dia reinforced concerete pipes, class NP2, laid and jointed complete with collars and jointed as specified.
Demolition of RCC work of any description and any position.
M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and like axcept set in cement mortor 1:4 complete incl necessary form work all as specified.
M&L mild steel TMT bars 6-8mm dia bar cut to length, bent to shape required including cranking, bending spirally for hoping for fencing posts and binding with mild steel wire (annealed) not l3ess than 0.9 mm dia all as specified.
Demolition of septic tank and soakage well (constructed by engineers unit) including desilting/desludging the septic tanks/ soakage wells etc by manual labour or mechanical means and removing the sludge in liquid or semi-liquid state out side defence land complete.
Construction of 20 users Septic tank to carry sewage and sullage water, with RCC (1:1.5:3), B-1 Roof Slab all as per shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 with following specification. Excavation in any type of soil, precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls , Base Slab , Baffle walls of RCC (1:1.5:3), Vent shaft , manhole openings with cover connection Complete. Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing. (ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings.
Construction of Soak well 1.80m dia and 3.0m effective depth as specified on STD 1173(C) sheet 1R/2 with following specification free board as per site requirement in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of precast cement concrete (20mm graded stone aggregate) block masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with Stone boulders of size, complete all as specified on STD 1173(C) sheet 1R/2. Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing. (ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings.
Demolition of concrete of any desctription and in any position not otherwise specifically provided for complete all as specified and directed
M&L for PCC 1:2:4 B1, 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed
Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, mould, mitred/stopped ends etc. complete all as specified and directed
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl casing capping point wiring with accessories having ISI mark for one light/fan/bell point/5 amp indep/power point/same board controlled by one switch complete all as specified and directed.
All as per item No 92 here-in-before but for one multipin socket outlet 5 Amp but using 2x 1.5 + 1 x 1.5 sqmm multistranded FRLS copper cable on the independent board.
All as per item No 92 here-in-before but for one multipin socket outlet 5 Amp on the same board with other switches
All as per item No 92 here-in-before but for one multipin socket outlet 15 Amp, but using 2 x2.5 +1 x 2.5 sqmm multistranded FRLS copper cable, independent board
All as per item No 92 here-in-before but for single pole and neutral enclosure with a two pin plug and socket, but using 2 x4.0 +1 x 4.0 sqmm multistranded FRLS copper cable, independent board
S&F in replacement of switch piano type 5 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.
S&F in replacement of socket outlet multipin 5 Amp 230 Volt flush type complete all as specified and directed.
S&F in replacement of switch piano type 15 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.
S&F in replacement of socket outlet multi pin 15 Amp 230 Volt flush type complete all as specified and directed.
S&F In replacement of for Lamp holder, PVC/Polycarbonate type with back plate suitable for Angle/batten fittings complete all as specified and directed
S&F of rechargeable led bulb minimum 4 Hrs Battery backup 9 Watt B-22 Base complete all as specified and directed.
S&F in rplacement of Ceiling rose, 3 terminal, PVC isolated body complete all as specified and directed
S&F in replacement of LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in replacement LED light fitting 1x10W/1X12W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
S&F including flushing in wall MCB distribution board vertical TPN 4 way 415 volt AC doublr door sheet with bus bar neutral earth bar including provision of MCB TPN 63 amp conforming to IP 43 as incomer complete all as specified and directed.
S&F MCB TPN 63 amp 415 volt with bearing capacity of 16 KA complete all as sp[ecified and directed.
S&F in replacement of sheet metal enclosure double door distribution board single pole and neutral, 12 way 240 volt with 100 amps rated bus bar complete with bus and neutral link complete all as specified and directed.
S&F in replacement of MCB 6 to 32 amp rating 240V, 10KA 'B' curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
S&F in replacement of MCB SPN 40 amp2 amp rating 240V, 10KA 'B' curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply & laying LT UG XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade cross-sectional area 16 sqmm 4 core as per IS specification laid through GI pipe/on floor/wall complete all as specified and directed
Supply and laying of GI pipe light galvanized with all fitting laid in trenches for cable proctection of 50 mm bore all as specified and directed.
M&L in replacement of Earthing complete with galvanised steel earth plate electrode 600×600×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as directed.
Supply and fixing Building LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed.
Supply, laying and drawing in and including 20 mm dia casing caping including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.
S&F metal type exhaust fan single phase 230/240V of 300 mm sweep including louvre & cutting of holes in a round shape and including fixing the exhaust fan complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F for fixing of GI pipe (light grade) bracket of 40mm dia size of 1.2 mtr long bent to shape for fixing of LED street light fittings and fixing to pole, walls etc including fixing of clamp, nut, bolt etc as specified and directed.
S&F single pole and neutral enclosure with a two pin plug and socket complete with one single pole MCB 32 Amp complete all as specified and directed.
S&F of double wall corrugated HDPE duct pipe of 50 mm outer dia PN 10 of approved colour with fittings for cable protection complete all as directed.
Schedule of Credit
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
TD93.pdf
Tender Documents • 2.23 MB
BOQ_845258.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid