Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.5 LAccepted-AOC | L1 | Accepted-AOC being L1 | |
| 2 | L2₹16.7 L+₹35,060 (2.14%)Rejected-Finance H NO 12 ADRASH SAINIK ENCLAVE HISAR CANTT HARYANA | HISAR | HISAR | HARYANA | 125006 | L2 | Rejected-Finance being L2 | |
| 3 | L3₹19.6 L+₹3.3 L (19.9%)Rejected-Finance | L3 | Rejected-Finance being L3 | |
| 4 | L4₹19.7 L+₹3.3 L (20.4%)Rejected-Finance | L4 | Rejected-Finance being L4 | |
| 5 | L5₹20.7 L+₹4.3 L (26.5%)Rejected-Finance | L5 | Rejected-Finance being L5 |
Tender Value
Refer Docs
EMD Value
₹54,000
Closing Date
12 Jan 2021, 6:00 pmClosed
GE WEST HISAR
GE WEST HISAR, HISAR MIL STN, HISAR 125006
CERTAIN ESSENTIAL REPAIR/MAINT/REPLACEMENT OF CI/GI PIPE LINES AND CONNECTED WORK AT HISAR MIL STN UNDER GE (W) HISAR
2020_MES_401333_1
GE(W)HSR-62/2020-21
Open Tender
Civil Works
Item Rate
270 days
HISAR MILITARY STATION
please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE WEST HISAR
₹54,000
Yes
5 Feb 2021
7 Dec 2020
14 Jan 2021
7 Dec 2020
12 Jan 2021
29 Dec 2020
Amount
Excavation in trenches in soft/loose soil n. exc. 1.5 mtr deep and not exceeding 1.5 mtr in width for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.
Excavation in trenches in hard & dense soil (in Road cutting / plinth) soil n. exc. 1.5 mtr deep and not exceeding 1.5 mtr in width for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.
Removal of surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and as directed.
Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick in any type of soil after the existing water pipe lines have been taken up/out and new existing pipe line laid and tested complete all as specified and directed.
Taking up or down old steel tubing 15 mm bore and connections from trench/floor/along wall including cleaning for refixing or removal from site (excavation and earth work shall be measured and paid for separately).
Description same as per srl item No. 5 herein before but GI tubing of size 20 mm bore.
Description same as per srl item No. 5 herein before but GI tubing of size 25 mm bore
Description same as per srl item No. 5 herein before but GI tubing of size 40 mm bore.
Description same as per srl item No.5 herein before but GI tubing of size 50 mm bore.
Description same as per srl item No. 5 herein before but GI tubing of size 80 mm bore.
Description same as per srl item No. 5 herein before but GI tubing of size 100 mm bore.
Laying only, jointing and testing galvanized iron tubes 15 mm bore with all new fittings, laid in trenches (excavationand earth work shall be measured and paid fpr separately) (Note : Old GI tubing obtained from taking down shall be used in this item)
Description same as per srl item No. 12 here in before but size of tubing 20 mm bore (Note : Old GI tubing obtained from taking down shall be used in this item)
Description same as per srl item No. 12 here in before but size of tubing 25mm bore (Note : Old GI tubing obtained from taking down shall be used in this item)
Description same as per srl item No. 12 here in before but size of tubing 40mm bore (Note : Old GI tubing obtained from taking down shall be used in this item)
Description same as per srl item No.12 here in before but size of tubing 50mm bore (Note : Old GI tubing obtained from taking down shall be used in this item)
Description same as per srl item No. 12 here in before but size of tubing 80mm bore (Note : Old GI tubing obtained from taking down shall be used in this item)
Description same as per srl item No. 12 here in before but size of tubing 100 mm bore (Note : Old GI tubing obtained from taking down shall be used in this item)
Supply and Laying, jointing and testing galvanized iron tubes 15 mm bore medium grade with all fittings confirming toIS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed (excavation and earth work shall be measured and paid for separately)
Description same as per srl item No. 19 here in before but size of tubing 20 mm bore.
M Description same as per srl item No. 19 here in before but size of tubing 25 mm bore.
Description same as per srl item No .19 here in before but size of tubing 40 mm bore.
Description same as per srl item No.19 here in before but size of tubing 50 mm bore
Description same as per srl item No. 19 here in before but size of tubing 80 mm bore.
Description same as per srl item No. 19 here in before but size of tubing 100 mm bore.
Taking up from trench old cast iron pipe 80 mm bore of any class & length (including all fittings) including disconnecting pipes & fittings including burning out joints and recovering lead for reuse in CI pipe by using new spun yarn and extra lead for jointing material and stacking for measurement including cleaning for refixing or removal from site complete all as specified (excavation and earth work shall be measured and paid for separately).
Description same as per srl item No.26 here in before but CI pipe of size 100 mm bore.
Description same as per srl item No. 26 here in before but CI pipe of size 150 mm bore.
Description same as per srl item No. 26 here in before but CI pipe of size 300 mm bore.
Supply, Laying, jointing and testing cast iron pipe 80 mm bore with spigot & socket ends (ISI Marked) centrifugally cast of class LA and in any length, laid in trenches complete all as specified and as directed (Note : Excavation and earth work, cast iron fittings or special for spigot and socketed shall be measured and paid for separately) .
Description same as per srl item No. 30 here in before but CI pipe of size 100 mm bore.
Description same as per srl item No. 30 here in before but CI pipe of size 150 mm bore.
Description same as per srl item No. 30 here in before but CI pipe of size 300 mm bore.
Laying only, jointing and testing cast iron pipe 80 mm bore with spigot & socket ends/ flanged ends centrifugally cast of any class and in any length, laid in trenches complete all as specified and as directed (excavation and earth work, cast iron fittings or special for spigot and socketed shall be measured and paid for separately). (Note : Old CI Pipe obtained from taking down shall be used in this item)
Description same as per srl item No. 34 here in before but CI pipe of size 100 mm bore. (Note : Old CI pipe obtained from taking down shall be used in this item)
Description same as per srl item No. 34 here in before but CI pipe of size 150 mm bore.(Note : Old CI pipe obtained from taking down shall be used in this item)
Description same as per srl item No. 34 here in before but CI pipe of size 300 mm bore.(Note : Old CI pipe obtained from taking down shall be used in this item)
M&L for cutting cast iron 80 mm bore pipes for insertion of new tees, branch and reducing to required length complete all as specified and directed. (Note: Both sides cut shall be measured as one unit)
Description same as per srl item No. 38 here in before but size of CI pipes 100 mm bore
Description same as per srl item No.38 here in before but size of CI pipes 150 mm bore
Description same as per srl item No. 38 here in before but size of CI pipes 300 mm bore
M&L for cast iron fittings or specials for flanged / spigot socketed end pipe upto 150 mm bore conforming to IS-1538 and ISI marked such as bends , tapers, tee pieces (single & double branch) any type, and angle/radios amd Straight connecting pieces but all ends flanged complete (joints, excavation and earth work shall be measured and paid separately)
M&L for cast iron fittings or specials for flanged / spigot socketed end pipe from 200 to 400 mm bore conforming to IS-1538 and ISI marked such as connecting pieces and end flanged and other socket or spigot and bell muth pieces one end flanged other end tapering as bell mouth (joints, excavation and earth work shall be measured and paid separately)
Burning out lead joints of CI pipe and fittig 80 mm bore in position including removing old lead to complete and refilling old lead to existing erthing pipe line, joints. Note : Addition lead, yarn, white/red lead if required shall be measured and paid separately under separate item as supply only.
Description same as per srl item No. 44 here-in-before but size of CI pipe & fittings 100 mm bore.
Description same as per srl item No. 44 here-in-before but size of CI pipe & fittings 150 mm bore.
Description same as per srl item No. 44 here-in-before but size of CI pipe & fittings 200 mm bore.
Description same as per srl item No. 44 here-in-before but size of CI pipe & fittings 250 mm bore.
Description same as per srl item No. 44 here-in-before but size of CI pipe & fittings 300 mm bore.
M&L for run lead joint for 80 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required complete all as specified and directed.
Description same as per srl item No. 50 here-in-before but size of CI pipe & fittings 100 mm bore.
Description same as per srl item No.50 here-in-before but size of CI pipe & fittings 150mm bore.
Description same as per srl item No. 50 here-in-before but size of CI pipe & fittings 200 mm bore.
Description same as per srl item No.50 here-in-before but size of CI pipe & fittings 250 mm bore.
Description same as per srl item No.50 here-in-before but size of CI pipe & fittings 300 mm bore.
S&F in repair Gun metal globe or gate valves of 15 mm bore dia pipe with iron wheel head , screwed both ends for iron pipe and fixed complete all as specified and as directed.
Description same as per srl item No. 56 here in before but size of gun metal gate valve 20 mm bore.
Description same as per srl item No. 56 here in before but size of gun metal gate valve 25 mm bore.
Description same as per srl item No. 56 here in before but size of gun metal gate valve 40 mm bore.
Description same as per srl item No. 56 here in before but size of gun metal gate valve 50 mm bore.
Supply and laying, jointing cast iron sluice valve of class PN-1.6 IS-14846 marked 300 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.
Description same as per srl item No. 61 here in before but size of sluice valve 250 mm bore
Description same as per srl item No. 61 here in before but PN 1.6 size of sluice valve 200 mm bore
Supply and laying, jointing cast iron sluice valve of class PN-1 IS-14846 marked 150 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.
Description same as per srl item No. 61 here in before but size of sluice valve 100 mm bore
Description same as per srl item No. 61 here in before but PN 1.6 size of sluice valve 80 mm bore
M&L for construction of brick masonry valve pit of size 1050 mm X 1050 mm X 1050 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.
Description same as per srl item No. 67 here in before but internal size of valve pit 900 mm X 900 mm X 900 mm.
Supply only flange,nuts, bolts,washers (machine made) of any size suitable for sluice valve/non return valve/CI/GI flanged pipe off sizes as required at site complete all as specified and directed.
virendra constructions
P.K. ENTERPRISES
M/S KAVITA CONSTRUCTION
Puja Traders
m/s Rajesh Kumar
YASHU CONTRACTORS
SMS Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .