REPAIR / REPLACEMENT OF CI / DI/GI PIPE LINES OF EXTERNAL WATER SUPPLY SYSTEM AT FATEHGARH CANTT UNDER GE FATEHGARH

Amount

Excavation in trenches n exc1.5m wide and n.exc 1.5m in depth for laying of pipe etc and getting out in soft/loose soil including forming bottom surface to require slope and gradient complete all as specified and directed

Returning, filling in, including spreading, levellling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed

Removing excavated material soil not excluding 50m and depositing where directed at the level not excluding 1.5m above the starting point all as specified and directed

Taking out/ Dismantling of CI/GI water mains including all CI fittings of 150mm size, including cleaning of scale and all loose material from inner part of the bore and recoving of lead, complete all as specified and directed. (Note:- Excavation shall be measured and paid separtely under the respective items of this schedule)

.....ditto.. as above but 100mm bore

Supply, Laying, jointing and testing of 150 mm bore Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining including tyton rubber push on joint laid in trenches & testing complete all as specified

Supply, Laying, jointing of 100 mm bore Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining including tyton rubber push on joint laid in trenches complete all as specified

Supply, Laying, jointing of 80 mm bore Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining including tyton rubber push on joint laid in trenches complete all as specified

Re-fixing jointing and testing only CI water mains for 100 mm bore of any description and in any position complete all as specified and directed with and including necessary run lead joints . Note:- Old pipes shall be used in the work obtained in serviceable condition.

...ditto .. As above but 150 mm bore complete all as specified and directed ....Ditto....

M&L for cutting of CI/DI pipe of 80/100/150 mm bore for inserting of Tee, collars, connecting pieces etc in between and making pipe line workable after repairs with and including necessary excavation and earth work. Note:- Fitting shall be paind extra.

S&F cast iron sluice valve class PN 1.6 heavy duty both ends flanged, suitable for 80mm bore conforming to IS 14846 of 2000 duly ISI marked with wheel operated handle with high tensile stainless steel spindle with and including necessary joints & joining materials , including nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F cast iron sluice valve class PN 1.6 heavy duty both ends flanged, suitable for 100mm bore conforming to IS 14846 of 2000 duly ISI markedm with wheel operated handle with high tensile stainless steel spindle with and including necessary joints & joining materials, including nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

S&F cast iron sluice valve class PN 1.6 heavy duty both ends flanged, suitable for 150mm bore conforming to IS 14846 of 2000 duly ISI markedm with wheel operated handle with high tensile stainless steel spindle with and including necessary joints & joining materials, including nuts, bolts, washers etc of required size including taking out old existing unserviceable sluice valve and including making arrangement for safe working complete all as specified and directed.

M&Lfor NRV cast iron both ends flanged ,150 mm bore ISI marked and inlcuding all nuts bolts,sheet and gasket etc including taking out old existing unserviceable NRV complete all as specified and directed.

M&L for cast iron fittings of any description i.e bends (any type radius and angle), tappers any type (straight, bend increasing descreasing or dboule socket etc), tee pieces single branch Y junction, double branch cross, (all socketed or socket and spigot) , connecting pieces (one side flnaged other socketed or spigot and bell mouth pieces one end flanged other tapering as bell mouth or both flanged / both socketed end as directed) including collars, caps and plugs upto 200mm with and including nut bolts, packing materials etc and making joint water proof complete all as specified and directed. Note:- Weight of fitting shall be actual weight or weight for each fitting given in IS code IS-1538-1976 (Part-I to xxv).

Supply, fixing, jointing and testing DI fittings as per BSEN:545 IS-9523 such as bend (of any radius and angle) Tee, reducer, collar caps, plugs, glands, tapers and junctions etc of any description with socket/spigot/flanged at ends as per site requirement suitable up to 150mm bore complete all as specified and directed.

S & F in replacement valve pit cover for chamber size ( 900 mm x 900 mm x 900 mm ) made out of 3mm thick mild steel plain sheet and frame work of angle iron ofsize ( 40mm x 40mm x6 mm ) thick incl providing 4 Nos mild steel butt hinges 100 mm size and MS handle of flat iron fabricated and two coat of synthetic enamel paint over a coat of red oxide primer and including preparation of steel surfaces complete all as specified and directed

....ditto... as above but of size 600mm x 600mm x 600mm

.... ditto... As above but of size 1200mm x 1200mm x 1200mm

S&F in replacement on floor /walls /column/Ceiling in trenches MS ERW pipe with flange joint in any length for modification / diversion of existing system 150mm bore including necessery joints/ welding for hydrant system complete all as specified and directed. Note :- Flange joint shall be measured and paid seperately in respctive items.

... Ditto.. As above but 100 bore ... Ditto....

Supply & fixing & testing Gun-metal,globe or gate valve 50mm bore with iron wheel head, screwed both ends for iron pipe and fixed all ,including dismantling of old GM gate valve as specified & directed by Engineer in Charge.

... Ditto.. As above but 40mm bore ... Ditto....

... Ditto.. As above but 25mm bore ... Ditto....

... Ditto.. As above but 20mm bore ... Ditto....

M&L for construction of brick masonary valves pits with sub-class 'B' brick buit in cemet mortar (1:6) of size 1200mm X 1200mm X 1200mm (internal dimension) with one brick walling and 150 cm X 150 cm X10 cm base foundiation with PCC (1:3:6) rendering MC cover of size (1m X 1m) made out from 3mm thick MS sheet including 40mm X 40mm X 5mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of MS cover with two coat of synthectic enamel paitn over a coat of red oxied primer including necessary earth work & demolition of the existing old valve pit all as specified and as directed.

M&L for construction of brick masonary valves pits with sub-class 'B' brick buit in cemet mortar (1:6) of size 900mm X 900mm X 900mm (internal dimension) with one brick walling and 150 cm X 150 cm X10 cm base foundiation with PCC (1:3:6) rendering MC cover of size (1m X 1m) made out from 3mm thick MS sheet including 40mm X 40mm X 5mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of MS cover with two coat of synthectic enamel paitn over a coat of red oxied primer including necessary earth work & demolition of the existing old valve pit all as specified and as directed.

M&L for constrction of valve pits with sub class 'B' brick in cement mortar (1:6) of size (600mm X 600mmX 600mm) (internal dimension ) with one brick walling and 150cm X 150cm X 10cm base foundation with PCC(1:3:6) rendering cement plastering 10 thick with cement mortar (1:4) on internal & exposed surface, incuding MS cover of size (75cm X 75cm) made out from 3mm thick MS sheet including 30mm X 30mm X 5mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of MS cover with two coat of synthectic enamel paitn over a coat of red oxied primer including necessary earth work & demolition of the existing old valve pit all as specified and as directed.

... Ditto.. As above but size 450mm X 450mm X 450mm ... Ditto....

M/S Sonu Traders

MS. BK BROTHERS AND CO

S B ENTERPRISES