Providing internal partition, false ceiling and miscellaneous works in the 1st floor (south and north wing) for DPS and the 8th floor (south wing) for TDD at V.S. Bhavan, Anushaktinagar, Mumbai.

Amount

ABSTRACT SHEET

PART A : CIVIL WORKS

PART B : ELECTRICAL WORKS

Description of Work / Item(s)

Amount

PART A : CIVIL WORKS

Providing and fixing 15 mm thick pre-painted of approved shade densified edged eco friendly light weight calcium silicate false ceiling tiles of approved manufactureres of M/s. Aerolite with a texture of spintone/ cosmos/ spectra of size 595 x 595 mm in true horizontal level suspended on inter locking hot dipped galvanized steel sections with min Z12 (120g/sm) coating thickness,to inhibit red rusting as per manufacturers warranty (Framework grid shall be of M/s. Armstrong) of steel/ aluminium sections consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm from 0.33 mm thick (minimum) sheet spaced 1200mm centre to centre and cross ''T'' of size 24x28 mm made out of 0.33mm (Minimum) sheet, 1200 long spaced between main "T" at 600 mm centre to centre from a grid of 1200 x 600mm and secondary cross "T" of length 600 mm and size 24x28 mm made of 0.33 mmthick (Mimimum) sheet to be inter locked at middle of the1200 x 600mm panel to from grid of size 600x600mm, resting on periphery walls / partitions on a perimeter wall angle pre-coated steel of size (22x22x3000 mm made of 0.45 mmthick mimimum ) sheet with the help of rawl plugs at 450mm centre with 25mm long drive all screws @ 230 mm interval and laying 15mm thick densified edges calicum silicate ceiling tiles pre-painted of approved texture (Sprintone/Cosmos) in the grid including, wherever, required ,cutting /making opening for services like diffiusers, grills, light fittings, fixtures, smoke detectors etc. "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 6 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised level clips spaced at 1200 mm centre along main "T" bottom exposed with 24 mm of all T-sections shall bepre-painted with polyster baked paint all complete at all heights as per specifications drawings and as directed by the Engineer-In- Charge.

Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/top hung/fixed/ adjustable louvered windows/ doors, ventilators, boards with SS or sheet metal rivets/ screws joint of specified size, made of integrated bronze/ architect approved anodised finished (15 micron thick) aluminium section (extruded) , of approved manufacutres for following types with extruded sections ofJindal / Indal / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters (including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/ glazing clips fixed with necessary Stainless Steel/ Sheet metal/ Bronze anodised screws, grouting the gap with matching sealant and including dismantling of existing window frameand shutter, glass and depositing serviceable material to dept. store and disposal of debris out side V S Bhavan at location identified by EIC etc all complete generally as per specifications etc, all as directed by Engineer in charge.

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS: 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete all as per the direction of Engineer- in- Charge.

a) 12 mm thick.

Providing and fixing 6 mm thick clear glass of M/s. Modiguard / Saint Gobain or other approved equivalent make including providing and fixing necesssary EDPM gasket / Neoprane gasket, cutting, wastage including disposal of debris outside Anushakti Nagar colony etc complete all as per specifications and as directed by the EIC. (Note : Only the clear opening of glass shall be measured for payment.). The aluminium snap beading if required for work shall be measured and paid in relevant item.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315 ( Make of Hardwyn or Dorma), having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-Charge.

Providing and fixing of 25 micron thick non reflective type sun control film of M/s. Garware or approved equivalent make, for windows, doors glasses etc including cutting to size, solution for fixing, cleaning the glass, disposal of debris of outside colony etc all complete all as per specifications and as directed by Engineer in Charge.

Demolishing brick /stone masonry in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & disposing of unserviceable materials out side V S Bhavan within anushaktinagar at location identified by EIC etc. complete all as per specification & as directed by the Engineer-in-Charge.

a) Brick work.

Dismantling Aluminium partitions, Doors, Windows, Ventilators including shutters & frames (chowkhats), Architraves, holdfasts etc. complete and stacking within 150m lead and subsequent transporting to the stores. etc. and disposing the unserviceable materials out side V S Bhavan at location identified by EIC complete as directed by the Engineer in-charge.

Brick work in ready mix mortar of M/s. Roofit, M/s. Ultratech or equivalent of 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level, simultaneous pointing below ground level, curing, etc. complete all as per specifications & as directed by the Engineer-in-Charge.

b) In super structure at all floors and levels.

Cement plastering 15mm thick using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with pop over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc. and removing existing damaged/ worn out plastering and disposing off out side V S Bhavan at location identified by EIC etc. complete all as per specifications and as directed by EIC.

Distempering with two coats of approved paint make M/s. Asian or Dulux or equivalent of acrylic oil bound distemper (Premium quality paint) of approved shade and make over one coat of approved cement primer incuding preparing the surfaces, completly removal of old paint & neeru, sand papering, filling with approved make putty wherever required in all depressions upto finished level including scaffolding, all necessary tools tackles, moving furniture, cleaning of colour stains on floors, doors & windows etc. all as per specifications and as directed by the Engineer-in-Charge.

Description of Work / Item(s)

Amount

PART B : ELECTRICAL WORKS

For LED lighting fixture Disconnection & dismantling of existing surface mounted LED light fixture and supply installation testing & commissioning of Recess mounted LED fixture similar to Model No. CRCO10R03865G1L1AE of M/s Wipro with dimension approx.2'(W)X 2'(L) min efficacy :- 100 lm/W, min.lumen output :- 3500Lm , CCT :- 6500 K, min.CRI :- 80, min. P.f :- 0.95, min. I.P :- 20, THD- <10% Housing:- Powder Coated Extruded Aluminium/Powder coated CRCA Diffuser: Polycarbonate/Acrylic complete with accessories , 2 nos (minimum) of 6 mm anchor fasteners / suitable coach screw & safety chain.

For ceiling fans Disconnection & dismantling of existing ceiling fans safely & re-installation testing & commissioning the same with extended down rod & safety chain as per the false-ceiling height.

For Fire alarm & fire fighting system Intelligent Addressable Multi sensor Detector :Installation, testing and commissioning of Vds approved Intelligent Addressable type multisensor detector with base model no MTD533X of M/s Schrack for use as heat or smoke or combined both having integrated fault isolators, capability of soft addressing from panel & detecting all types of fires from TF-1 to TF-8 & all classes of heat as per EN-5,7 & 29 etc. all as per tender specification & as directed by Engineer in-charge. Scope of work includes integration of above devices in existing system by addressing, programming in the system, etc. all as directed by Engineer in-charge.The work shall be carried out through M/s Schrack or Authorized service provider of M/s Schrack.

Remote Indicator: Supply, installation, testing and commissioning of Remote indicator ceiling mount, controlled and powered directly via the alarm output of the fire detector or a suitable loop module etc. all as per tender specification & as directed by Engineer in-charge.

Cable in existing concealed MS conduit :Installation, testing and commissioning of 1100 V grade, 2 C x 1.5 Sq.mm Multistranded Copper conductor , PVC insulated, Extruded FRLS PVC Type 'ST3' sheathed Flexible cable confirming to relevant IS standards including termination with suitable copper lugs at Device base/Loop module boxes/Junction boxes/Speakers, ferruling on both sides etc. all as directed by Engineer in-charge.

Providing and fixing the vertical SS flexible drop at all heights and levels for firefighting sprinklers to be provided from existing branch lines up to the proposed false ceiling level, including removing the existing sprinkler and fitting it to the SS flexible drop to the false ceiling level. The job includes removing the existing sprinkler carefully without damaging it, providing and fixing a new SS vertical drop for about 1 metre from the branch line up to the false ceiling, refitting the sprinkler to the newly fitted SS vertical flexible drop, etc. with all tools, tackles, etc., all as directed by EIC.

AMBIKA ENTERPRISE

AMBIKA ENTERPRISE

KANTI FURNITURE WORKS