Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹92.0 L
EMD Value
₹1.8 L
Closing Date
22 Oct 2026, 2:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
E.E.C.P.-1
Executive Engineer, C.P. Division No.1, 4th Floor, Deluxe Building Sec 9, Chandigarh
RENOVATION OF ARAVALI HOSTEL GF AND FF IN BLOCK B, PEC, SECTOR 12, CHANDIGARH.
2026_CHD_96225_1
CP1/2026/3194064
Open Tender
Civil Works - Buildings
Percentage
150 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1.8 L
15 Oct 2026
15 Oct 2026
22 Oct 2026
15 Oct 2026
22 Oct 2026
15 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (4.1) | |||||
| 1.01 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (4.1.10) | 131.56 | cum | 6,342.6 | ₹8,34,432.46 |
| 2Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (9.21) | |||||
| 2.01 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (9.21.1) | 183.78 | sqm | 2,328.05 | ₹4,27,849.03 |
| 3Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (9.48) | |||||
| 3.01 | Fixed to steel windows by welding (9.48.1) | 345.17 | Kg | 213.18 | ₹73,583.34 |
| 4Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (9.96) | |||||
| 4.01 | 250x16 mm (9.96.2) | 336 | each | 253.56 | ₹85,196.16 |
| 5Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (9.97) | |||||
| 5.01 | 250x10 mm (9.97.2) | 168 | each | 112.04 | ₹18,822.72 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 20.70 MB
BOQ_118288.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .