PROVN OF VEH PARKING SHED AT STATION HQ AND PROVN OF COVERED SHED WITH GATE AND PAVER BLOCK BETWEEEN DISPENSARY AND MAIN GATE AT MH FATEHGARH

Amount

M&L for Surface excavation in soft and loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed

Excavating in trenches in soft and loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed

Returning filling including spreading, leveling, watering and well ramming in layers n.exc. 25cm for soft/loose soil complete all as specified.

Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning, filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed

Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.50M above the startig point.

M&L Hardcore (broken stone) of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 10 cm thick, watered and rammed to a true surface

M&L cement concrete 1:4:8 Type D2 ( 40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete in post hole Type B2 1:2:4 ( 40 mm graded aggregate) complete all as specified and directed

M&L for Brickwork using old size brick with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius with mortar 1:6 complete all specified and directed

M&L for Cutting holes of 15cm depth and not exc 150sqcm in area into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed

M&L for Mild steel sliding door bolts 300mm length, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

M&L for Mild steel pressed handles 150mm, oval type, stove enamelled black complete all as specified and directed

S&F tubular posts including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165

M&L Rolled mild steel Fe-410-W(Gde-E-250) quality-A in rolled sections as in main and cross beams, hip and jack rafters,purlins,posts where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde E- 250) quality A) complete all as specified and directed

S&F Rolled mild steel sections Fe-410-W(Gde-E-250) quality-A as in framing for cladding, glazing, to receive welded wire mesh, expanded metal and the like fixed with angle cleats and connecting plates, etc. complete all as specified and direcetd

S&F Rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and mild steel butt hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed

M&L for Expanded metal of weight not exc 4kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L 75mm thick Cement concrete type D-2, 1:4:8 (40 mm graded aggregate) finishing cement concrete surface without using extra cement even and smooth including necessary form work

M & L 75 mm thick PCC 1:2:4 type B-2 using 40mm graded aggregateds as in plinth protection, subbase of floors etc with all necessary items complete all as specified and directed

M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation of steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified and directed

Forming 12mm thick expansion joint filled with pre formed bituminus filler and top 30mm primed and sealed with sealing compound grade B for 75 mm thickness of concrete

M&L Machine pressed precast concrete interlocking paver block of any colour, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with gery cement and pigment , laid over 25mm thick sand all as spd and directed

M&L for 15mm thick cement plastering in cm 1:6 on brick or concrete surface fair finished the surface even and smooth without using extra cement all as specified

M&L for 15mm thick cement plastering in cm 1:4 on brick or concrete surface fair finished the surface even and smooth without using extra cement all as specified

M & L three coat of white wash on new plastered wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M&L for Sand filling under floors or foundation including spreading and levelling in layers n exc 25 Cm including well ramming and watering as required.

M/S WASEEM KHAN CONTRACTOR