RMO EandM Services installed under Sub-division M-2531 at Delhi Sachivalaya, New Delhi.SITC of different type of lights,fan and AC grills supply at delhi sachivalya building.

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, frequency 50/60 hz, Operating temp range 50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (ficker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be Confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by EngineerinCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim 18 watt

LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, frequency 50/60 hz, Operating temp range 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM2111 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by EngineerinCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 36 watt

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD63 mm & ID51 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying Installation Testing Commissioning of LaserJet printer having printing resolution 1200 x 1200 dpi, (dot/inch) or better, 21 to 30 ppm printing speed (LaserJet) complete etc. as required

Supplying, installation, testing and commissioning of decorative retrofit outdoor LED (1824 watt) bollard light fitting of height not less than 1 metre, fixture size 385*225 mm (nominal) with hexagonal lantern top, fluted ornamental post and square decorative base, fixture mounted on aluminium die cast column with cast alum base, made of pressure diecast aluminium with corrosionresistant powder coated finish with PC/PUMMA diffuser, silicon filled complete having duly primar and painted, suitable for operation on 230V AC, 50Hz supply i/c making cement concerete foundation and painting as per OEM standard with the help of foundation bolt complete with necessary internal wiring, earthing terminal, and all accessories required for proper installation and operation as per site requirement and direction of EngineerinCharge. (Note: 1824 W LED bulb included, CCT should be 4000°K ).

Supplying, Installation, Testing and Commissioning of Track light LED in black/white finsh of 10 W COB LED to provide focus light with made out of pressure die cast aluminium housing for effective thermal management. , System Efficiency atleast Minimum should be 90Lm/W, CCT 4000K/5700K/6500K, , suitable for operation on 230 V single phase AC supply with all accessories and connections as required, as per direction of EngineerIn charge.

Supplying, Installation, Testing and Commissioning of LED light Track of black/white finish atleast 1 mtr length with made out of pressure die cast aluminium housing with all accessories and connections as required, as per direction of Engineer-In charge.

Supply, installation, testing and commissioning of weather proof street light pole junction box, size atleast 140 x 140 x 95 (nominal) made of FR polycarbonate/ABS material, IP65 protection, with 1 No. 6A/10A SP MCB, 4way connector strip, and cable glands, suitable for outdoor use etc as required.

Supplying Installation, testing & commissioning of 400 mm sweep wall fan, 230V, 50hz, rated speed 1350 RPM on the existing surface and making good the damage, making connections, interconnections, earthing etc, as required.