NIT NO. 14 ITEM NO. 01

Amount

Supply of of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 20 watt+/-S%(b )Luminous efficacy lumens/watt >=95 (c)Power Factor >=0.95

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

SITC of 150W LED Flood Light luminaire fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =150 watt+/- 5% (b) Luminaire Efficacy>=l00 Lm/w (c) Power Factor>=0.95 (d) Protection Class- IP-66

Providing and installation of Outdoor copper condensor coil in 2 Ton Slit Unit

Leak detection pluging thereof, complete with reprcessing dehydration and gas charging in 2 Ton Split AC's

Providing and installation of outdoor motor in 2 Ton split unit

Providing and installation of fan in 2 Ton Split AC's Unit

Repair of PCB circuit for 2 Ton Split AC's Unit

Providing and Installation of PCB circuit in 2 Ton Split Unit.

Providing and installation of compressor in 2 Ton Splt AC's

Providing and Installation of indoor blower in 2 Ton split AC's

Providing and Installation of indoor motor in 2 Ton Split Unit

Providing and Instalation of running capacitor in 2 Ton Split Unit

Providing and Installation of PCB for 4 Ton Cassette type AC's Unit

Repair of outdoor unit PCB for 4 Ton Cassette AC's Unit

Gas charging in 4 Ton cassette type AC's unit complete with reprocessing and dehydration

Providing and installation of motor in outdoor unit of 4 Ton cassette type AC's Unit

Providing and installation of outdoor unit fan for 4 Ton cassette type AC's unit

Providing and installation of Magnetic contactor

Provding and Installation of gas charging valve for 4 Ton cassette type AC's unit.