Construction of welcome gate for Indus river at Demjok

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Dumping of stone including cost of stones in horizontal on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5 (1:4:8) grade, with 40mm nominal size of stone aggregates). Crushed

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement of R.C.C work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete. TMT bars

Centring and shuttermg including strutting, propping etc. and removal of form for· a) Foundations: footings, bases of columns etc. for mass concrete.

b) Lintels, beams, plinth beams, girders, bressumers and centilevers.

c) Suspended floors, roofs, landings, balconies and access platform.

d) Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with 2nd class kail wood

French spirit polishing with Two or more coats on new works including a coat of wood filler

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1Osqm

Providing and fixing Stainless Steel (SS-304) laser-cut letters of 600 mm height made from 1.2 mm thick sheet for writing “WELCOME TO DEMCHOK” on entry gate beam, finished with hairline polish, including studs, spacers, drilling, alignment, fixing on RCC Beam, transportation, labour and all complete as per direction of Engineer-in-Charge

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(12.50)LSOR

Carriage of materials by mechanical transport 1. Cement and steel from avg lead of 100 kms

Sand from avg lead of 30 kms

Stone aggregate from avg lead of 30kms

Stone from avg lead of 30.0kms

Please Enable Macros to View BoQ information