SPECIAL REPAIR TO BLDG NO 19B, 19C, 298 (OTM ACCN) OF 146 LT AD REGT, BLDG NO 286 AND 287 OF BI LINE, BLDG NO P-80/01 TO 03 OF DOGRA LINE AND BLDG NO 28 OF SATA BTY AND CERTAIN SANCTIONED WORKS AT NASIRABAD

Amount

Taking down plaster on wall /ceiling of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in 1:6 on stone masonary wall surfaces, finished even and fair complete all as specified & directed.

M&L for 15 mm thick rendering in 1:4 on stone masonary wall surfaces, finished even and fair complete all as specified & directed.

M&L for 10mm thick rendering in cement mortar (1:4) on ceiling surfaces finished even and fair complete all as specified & directed.

M & L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

All as per above item No 5.00 here in before but on ceiling.

M & L for preparation of newly plaster surfaces of wall & applying two coats of oil bound distemper over & including 1mm thick wall care putty complete all as specified and directed.

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified and directed.

M & L for complete removal of existing treatment & preparation of surfaces of wall & applying two coats of oil bound distemper over & including 1mm thick wall care putty complete all as specified and directed.

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in CM (1:6) complete all as specified and directed.

All as per sl item no 13.00 here in before but except stone. NOTE: Old serviceable stones retrieved vide Sl Item no 12.00 shall be reused.

Extra over stone walling of random rubble, uncoursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified and directed.

M & L for brick work of fly ash bricks of old size built in CM (1:6) straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M & L for brick work of fly ash bricks of old size, straight or curved on plan to any radius, in half brick thick wall built in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced/ reinforced) in any position & of any description not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc. complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, metered /stopped ends etc complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for vitrified ceramic coloured tiles (square / rectangular), 10mm thick, area of each tile not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for vitrified ceramic coloured tiles (square / rectangular), 10mm thick, area of each tile not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile as in skirting etc over & including 10 mm thick screed plaster in CM 1:4 on stone masonry wall surfaces complete all as specified and directed

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm,set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile as in skirting etc over & including 10 mm thick screed plaster in CM 1:4 on stone masonry wall surfaces complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 450 mm X 300 mm, 6-7 mm thick, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles on vertical surfaces of wall such as dados, skirting etc over & including 10 mm thick screed plaster in CM 1:4 on stone masonry wall surfaces complete all as specified and directed.

M&L for machine cut Kota stone slab flooring of size 550mm x 550mm 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over & including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Kota stone slab 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM (1:4) complete all as specified & directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub base to tiles complete all as specified and directed.

M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternate bays n.exc 2m in length complete all as specified and directed.

M&L 20mm thick black / colour granite on kitchen platform and similar work (size not less than 900 x 450mm over and inlcuidng 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the sande of granite stone including cutting and polishing complete complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed.

M & L for chequered cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed

M & L for machine pressed precast concrete interlocking tiles, reflective type, in path 60 mm thick, ISI marked, M-35 grade of approved quality laid over & including 25 mm sand cusion vibrated with mechinical vibrator complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in sunken floor complete all as specified and directed.

M & L for two coats of bitumen blown any grade, applied hot to concrete surfaces at the rate of 1.5 Kg per sqm per coat and applying polythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed. Note :- Supply only water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

S & F second class HW (Hollock/Bansum/Sal), plain, solid, straight, chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed.

M & L for rolled mild steel work angle iron (40x40x6mm) as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 (Gde E-165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

S & F hold fast of flat iron 25x6mm conforming to Fe- 290 (Gde E-165) including preparing the surfaces & treated with coaltar & sanded with clean sharp sand complete all as specified & directed

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour sheet PVC Sheet reinforced with M.S square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S & F second class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and fixtures.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2 raised panel design with 2mm thick moulded prelam coloured PVC sheet on front face & 2mm thick prelam coloured PVC sheet on back face and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and fixtures.

S & F factory made steel ventilator conforming to IS with top hung shutters including box type hinges with steel peg stay complete, dovetailed, welded incl fixing of lugs in PCC 1:2:4, type B-1 & making good walls & cills to match the existing surface complete all as specified & directed

S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wire gauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S&F powder coated aluminium door shutters with frame of aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, brass handle and brass tower bolts of size 150mm x 02 Nos in each door, hinges anodised aluminium snap beading screws, hydraulically regulated double action floor door spring made up of 1.25mm thick aluminium alloy sheet bix for each shutter etc and including fitted with 5mm thick tinted glass in glazed shutter with brass mortice lock 100mm 2 levers,vertical type complete all of weight and section size as specified in TD drawing No. CEBZ/16/11 Sheet No. 1/3 to 3/3 complete all as specified and directed.

Taking down of old boards and S & F 18/19mm thick block board grade-II quality, interior grade with decorative face veneer on one face fixed with nails including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as spepcified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F continuous (piano) hinges mild steel bright finish or electrogalvanised of 30mm width of flaps (when open) complete all as spepcified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm complete all as specified and directed.

S&F aluminium alloy anodised butt hinges, ISI marked of size 100 mm complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S & F aluminium alloy, anodised sliding door bolt, 300mm long, ISI marked, with hasp and staple (bolt type) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S & F 100mm size hasp and staple, aluminium anodised, safety type including bolt to hinge plate complete all as specified and directed .

S & F in repair 50mm dia polished IInd class hard wood knob fixed with screws complete all as specified and directed

S & F in repair 150 mm long aluminium alloy body floor door stopper complete all as specified and directed

S & F in repair magnet catcher of required size for cupboard shutter or cabinet complete all as specified and directed

Taking down pelmet any size with rod and bracket and S&F fancy type 20mm dia aluminium curtain rod powder coated fixed to bracket complete all as specified and directed.

S&F in repair decorative type knobs with bracket of MS powder coated fixing at end of pelmet rod complete all as specified & directed.

M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

Taking down existing unserviceable treatment of any description including cement plaster/cement concrete of any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50mtrs complete all as specified and directed.

M & L for rendering 10 mm thick in CM (1:4) on fair faces of RCC roof surfaces to match the existing slope and finished the surfaces fair & even complete all as specified and directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using blown type bitumen Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

Material and labour for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.6metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M & L for coved fillet in PCC (1:2:4) Type B-0 using 12.5 mm graded stone aggregate of radius 75mm at junction of roof and parapet wall/mumty/other vertical space and applying a coat of bituminous primer conforming to IS-3384 @ 0.30 litre/sqm complete all as specified and directed.

Dismentalling of wall of ceilling board , any thickness including frame work & removing from site complete all as specified and directed.

Providing & Fixing in repair false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-charge.

Cutting holes in to or through stone walls built in CM and making good the holes in CM 1:3 superficial area of hole exc 150 sqcm but n.exc 400 sqcm each complete all as specified and directed

S & F rolled mild steel conforming to Fe-290 Gde E-165 anle iron of any size fixed independently with or without connecting plate or welded to existing steel section complete all as specified and directed.

Dismantling AC corrugated sheet in roof covering complete all as specified & directed

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thickness of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed. Make :- Durashine (R) of Tata Blue scope or equivalent as approved by GE.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thickness of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed. Make :- Durashine (R) of Tata Blue scope or equivalent as approved by GE.

M & L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St -240 complete all as specified & directed.

M & L for M S plate conforming to Fe-410-W Gde E-250 quality 'A' with riveted, bolted or welded attachment complete all as specified and directed

Dismantling existing unserviceable, PVC / RCC water tank of capacity n.exc 500 litre each & removing from site complete all as specified and directed.

Dismantling existing unserviceable, PVC / RCC water tank of capacity exc. 500 litre but n.exc 1000 litre each & removing from site complete all as specified and directed.

S & F for rotational moulded polyethylene (HDPE) water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted, double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

S & F for rotational moulded polyethylene water storage tanks of 1000Ltrs capacity (cylindrical vertical with closed top), double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

S & F ball valves high pressure and of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm bore minimum weight 210 gms complete all as specified and directed.

M & L 40mm thick sand stone slab, set & jointed on joints in CM 1:4 including 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate (for providing bottom cover to PVC tank) complete all as specified and directed.

Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.

All as per item No.89.00 here-in-before but 20mm dia

All as per item No. 89.00 here-in-before but 25mm dia

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 92.00 here-in-before but 20mm dia

All as per item No. 92.00 here-in-before but 25mm dia

M & L for refixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed.

All as per item No. 95.00 here-in-before but 20mm dia

All as per item No. 95.00 here-in-before but 25mm dia

S&F in repair bib taps 15mm bore, fancy type, cast copper alloy, chromium plated with capston head, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair stop valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked with long shank & cup (concealed type) screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.

S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, fancy type, ISI marked screwed down high pressure with crutch or butterfly handle for iron pipe complete all as specified & directed.

S&F in repair stop/angle valve 15mm bore cast copper alloy, ISI marked screwed down high pressure with crutch or butterfly handle for iron pipe complete all as specified & directed.

Taking out old unserviceable tubular towel rail & S&F tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.

Taking out old unserviceable tubular towel ring & S&F tubular towel ring brass chromium plated complete all as specified & directed.

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repair 150 mm overhead brass chromium plated shower with arm flange including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repair gun metal high pressure globe or gate valve with iron wheel head screwed both ends for iron pipes of 25mm bore and fixed complete all as specified & directed.

S & F brass chromium plated soap dish of appropriate size complete all as speified and directed.

Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

Taking out old unserviceable wash down water closet and S & F vitreous china wash down water closet pan (pedestal pattern), white, including plastic cover white closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S&F jet flush including plate & PVC connection with clamps and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved qualitycomplete all as specified and directed

Taking down old unserviceable wash hand basin & S & F wash basin with padestal vitreous China coloured, oval shape size 550 x 400 mm including bracket, CP waste coupling, chain & stopper mounted on & including 18 to 20mm thick granite platform of size 900x600mm complete all as specified and directed

Taking down old unserviceable PVC connection with clamps and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

Taking down old unserviceable flushing cistern S&F PVC valve less syphonic action type low level flushing cistern, 10 Ltrs capacity, white, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

Taking down old unserviceable kitchen sink and S&F kitchen sink without drainage board overall size not less than 495 nx 429mm, bowl size 410x 330x 160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed.

Taking down old wooden plate rack and S & F stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785mm x 255mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.

Taking down CI soil, waste and vent pipe 100mm bore size set in CM from walls/trenches complete all as specified and directed.

S & F 100mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints, fixed to wall with existing clamps complete all as specified and directed

S & F 75mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints, fixed to wall with existing clamps complete all as specified and directed

S & F 100mm bore CI bend of any radius complete all as specified and directed.

S & F 75mm bore CI bend of any radius complete all as specified and directed.

Taking down PVC pipe in eaves gutter & rain water pipe of 110/75mm bore from walls/trenches complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, laid in trenches or in floors complete all as specified and directed.

All as per item No. 123.00 here-in-before but 75mm bore PVC (SWR) pipe

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. complete all as specifed and directed.

S&F PVC (SWR) 110 mm single juction (Single T) (equal or unequal) complete all as spd and directed.

S&F PVC (SWR) 75 mm vent cowl complete all as spd and directed.

S & F stack clamp made out of 50mm x 3mm flat iron & 16mm dia round iron stays, including bolts & nuts and securing ends of stay to walls or roof bore of pipe 110mm complete all as specified and directed.

S&F in repairs PVC floor trap 75 mm outlet with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs CI nahani trap 75 mm outlet with grating including jointing with PCC ( 1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed.

S & F 40mm bore high density polytheiene(HDPE) pipe of pressure rating 6 kgf/sqm complete all as specified and directed.

Taking down carefully copper / aluminium point wiring complete with concealed/surface conduit/casing caping wiring including fitting and fixtures such as switches, sockets, holders, ceiling rose, regulators, light fittings, tube light fittings etc removing from site and making good the disturbed surface of walls/ceiling etc complete all as specified and directed.

Disconnecting unserviceable sub main wiring (drawn through steel conduit) of any size including steel conduit & conduit accessories & removing from site and making good the disturbed surfaces complete all as specified and directed

Disconnecting electric connections and taking down old unserviceable MCB SPN/SP/TP and DB's of any capacity and removing from site complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories with suitable size of sunk type pressed steel terminal box concealed in wall, with PVC laminated sheet top cover 3mm thick with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable connected to common earth dolly for the following complete all as specified and directed:-

One light / bell point point controlled by one, one-way 5 Amps

One fan point controlled by one, one-way 5 Amps

One 3/5 pin 5 Amps socket outlet on same board with other switch

One 3/5 Pin 5 Amps socket outlet on independent board

One light point point controlled by one, two way 5 Amps

All as per item No 136.00 here-in-before but 2.5sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 2.5sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories for one 5 pin 5/15 Amp socket on independent board complete all as specified and directed.

S&F switch piano type, flush button, single pole, one way, 5 Amps complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F switch piano type, flush button, single pole, one way, 15 Amps complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F switch piano type, flush button, single pole, two way, 5 Amps complete all as specified and directed. Make : CONA / SSK / HAVELLS

S & F bell push piano flush type, 5 amp complete all as specified and directed. Make : CONA / SSK / HAVELLS

S & F electric bell, ding dong type AC 230 volts grade single pole complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F socket outlet 5 Amps, 5 pin, flush type, complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F socket outlet 15 Amps, 2 in1 , 3/5 pin, flush type, complete all as specified and directed. Make : CONA / SSK / HAVELLS

S & F stepped type electronic ceiling fan regulator, flush type, AC 230 volts complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F ceiling rose, surface bakelite 65 x 17.5mm, three terminal complete all as specified and directed. Make : CONA / SSK / HAVELLS

S&F batten lamp holder PVC/polycarbonate type with back plate suitable for batten complete all as specified and directed. Make : CONA / SSK / HAVELLS

S & F LED tube light fitting retrofit batten in acrylic linear tube (1x18 watt), 230 V for single LED tube light including 1x18 W LED retrofit bar professional CW 6500 K cover channel, bipin holder, LED power driver, connector block, etc complete with all accessories internally prewired and incuding connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make : Bajaj Cat part No BLRB 18 W CWc for tube & BLRB - DB 118 for batten, Havells cat part No PHOTONULTRA1213T8LLSSTL18WLED865SPC for tube & REGALBATTENT8UPTO1X18WDSBSWH for batten, Surya cat part No STETL-DS 18 PC REFORM for tube & SUB1 18T8LED for batten.

S & F in repair LED 12 watt recess mounted sleek round downlight with high aesthetic and colour temperature of 6000k with necessary wirings as required complete all as specified and directed. Make :- Bajaj Cat Part No : BGSLO Sleek 12W RD or equivalent make of C & S /HPL / Havells

S & F recess mounted 2'x2' luminarie with white powder coated CRCA hosuing with LEDs 36 watt, square shaped complete all as specified and directed. Make :- Bajaj Cat Part No BZRSQL 36W GZ1 WH, Jaquar Cat Part No. LULT01S36XC or equivalent make of Havells/Philips.

Supply & fix wall mounted decorative luminiare fitting with brass made bracket with 115 mm dia round base, brass arm length 57 mm, provided with 78mmx76mm breadth gallary, indiside 2 pin brass holder, frosted glass shade 170 mm length incl LED lamp 5 watt complete all as specified and directed. Make :- Mepro Cat Part No. MBBS-802 or equivalent model of Havells/Philips.

S & F LED light fittings, suitable for & including 1x10 watt bulk head luminaries with connector block etc complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz complete all as specified and directed. Make :- Bajaj Cat No : BIBWP 10W LED, Havells cat part No LHEOAP7UZ6W010 or equivalent make of JAQUAR/CROMPTON.

S & F LED mirror light fitting, suitable for & including 1 x 10 watt LED luminaire, attractive wall/ ceiling mounted type with metallic channel and white reflector, suitable for mirror fittings with complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Bajaj Cat Part No BCLSB 10 WH or equivalent model of Havells cat part No LHESAMPIN 1W005 or equivalent make of Philips as approved by GE.

Supply fixing testing and commissioning of energy saving street light luminiare suitable for & including 15watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate cover, complete with individual LED lenses including street light bracket made of 32mm bore GI pipe, medium grade, 1.2mtr long fixed with 02 No of suitable size of clamps, nuts & bolts and fixing on wall complete all as specified and directed. Make :- Bajaj Cat Part No BCLST 15W LED, Jaquar Cat Part No LSRT01S016XC or equivalent model of Surya.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of sheet steel enclosure, recessed type, factory made powder coated, 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F of distribution board triple pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of sheet steel enclosure, recessed type, factory made powder coated, 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make:Legrand/Siemens/Schneider Note : MCB DB and MCB will be of same make.

S&F MCB single pole 240 volt 10KA, 6 to 32 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

S&F MCB single pole and neutral 240 volt 10 KA, 10 to 63 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

S&F MCB triple pole and neutral 415 volt 10 KA, 63 Amps conforming to IS 8828 of 1996 curve 'C' complete all as specified & directed. MAKE: LEGRAND (DX-3), SCHNEIDER (ACTI-09), SIEMENS (BETAGARD)

M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6.00mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 5 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15mm dia medium grade GI pipe and watering pipe shall be 20mm bore, medium grade including excavation & earth work in any type of soil & disposal of sil chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with handle made out of 8mm dia bars, watering arrangement with funnel and wire mesh completed all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

M & L for submain wiring with two single core PVC insulated, unsheathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note :- Two run of single core cable, one run of earth continuity conductor & conduit shall be measured as one unit length.

Disconnecting and taking down existing electric meter and refixing the same electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc. complete all as specified and directed.

Taking down existing ceiling fan, dismantling blades, cleaning the fan & blades, fixing blades & refixing ceiling fan in position incuding connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

Surface dressing n exc 15 cm deep and in soft/ loose soil of soil complete all as specified and directed.

Excavating in trenches n.exc 1.5M wide and n.exc 1.5M in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed

Returning fillings in including spreading, leveling, watering and well ramming in layers, n.exc 25cm thick complete all as specified and directed

Removing of excavated soils, not exc 50 mtr and depositing where directed at a level n.exc 1.50mtr above the starting point complete all as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) foundation & mass concrete complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed.

M&L for 15 mm thick rendering in 1:4 on brick masonary wall surfaces, finished even and fair complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in rounded or chamfered on edges in any description complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc. complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, metered /stopped ends etc complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landing, cover slabs, shelves and manhole/drain cover complete all as specified and directed.

M&L mild steel TMT bars in reinforcement 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends , and binding with and including binding mild steel wire(annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M/s Jai Jinendra Constructions

H M LAXMINARAIN

Hitesh Construction