Estimate for providing gravitational distribution system network for villages paharpur,samlah etc for tank 3 changer area Shri Anandpur Sahib incl. supply, installation, testing and commissioning various valves fitting, air valves in all respect

Amount

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, including the cost of diversion for traffic, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. B Mechanical Means (a) Depth upto 3m

Cement Concrete 1:3:6 with (i) stone ballast 20mm gauge (PCC) mixing by mechanical means using concrete mixer volumetric type.

Reinforced cement concrete M-25 with cement @375/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and Plinth

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

12.5 mm thick cement plaster 1: 4

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete.

Supply and installation of alfa valve including fittings etc complete in all aspects of 90 mm

Supply and installation of alfa valve including fittings etc complete in all aspects of 110mm

Supply and installation of alfa valve including fittings etc complete in all aspects of 160mm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves (400 mm) ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) B )CIass PN-1.6 as per ISI

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves (300 mm) ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).B) Class PN-1.6 as per ISI

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves (250 mm) ISI marked 14846-2000, including jointing, testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).B) Class PN-1.6 as per ISI

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (200mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (150mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (100mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (80mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete .C.I Double air valve (Size 65mm)

Nuts & Bolts of all sizes and length required

Providing & Fixiing C.I indicating plates of size 100mm x 100 mm for SV/FH including synthetic enammel paint & letters in white enamel paint, fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including conrete block complete in all respect as directed by Engineer-in-charge

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. B) H.D.P. E pipe of 8 Kg. PE-100 P) 400 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI-4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. B) H.D.P. E pipe of 8 Kg. PE-100 P) 315 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications. B) H.D.P. E pipe of 8 Kg. PE-100 P) 280 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. B) H.D.P. E pipe of 8 Kg. PE-100 P) 250 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications. B) HDPE pipe of 8 Kg. PE-100 I) 225 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenche to correct alignment and gradients, cutting, jointing and testing complete as per specifications. B) HDPE pipe of 8 Kg. PE-100 k) 200 mm o/d

Providing, Laying, fixing & jointing of Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying thesame in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. B) HDPE pipe of 8 Kg. PE-100 j) 180 mm o/d

Providing,Laying , fixing & jointing of Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingand testingcompleteasper specifications. B) H.D.P.E pipe of 8 Kg. PE-100 i) 160 mm o/d

Providing,Laying , fixing & jointing of Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingand testingcompleteasper specifications. B) H.D.P.E pipe of 8 Kg. PE-100 i) 140 mm o/d

Providing, Laying, fixing & jointing of Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying thesame in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications. B) H.D.P.E pipe of 8 Kg. PE-100 g) 125 mm o/d

Providing,Laying , fixing & jointing of Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specfications. B) H.D.P.E pipe of 8 Kg. PE-100 h) 110 mm o/d

Providing, Laying, fixing & jointing of Marked H.D.P.E. Pipes as per ISI-4984 along the Trenches and laying thesame in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. B) H.D.P.E pipe of 8 Kg. PE-100 e) 90 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying thesame in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications. A)H.D.P.E pipe of 10 Kg. PE-100 e) 75 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications. A)H.D.P.E pipe of 10 Kg. PE-100 d) 63 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying thesame in Trenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications. A)H.D.P.E pipe of 10 Kg. PE-100 c) 50 mm o/d

Providing, Laying , fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying thesame in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. A)H.D.P.E pipe of 10 Kg. PE-100 b) 40 mm o/d

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI- 4984 along the Trenches and laying thesame in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. A)H.D.P.E pipe of 10 Kg. PE-100 b) 32 mm o/d

Supply and fixing of HDPE Reducer of 400 x 355 mm

Supply and fixing of HDPE Reducer of 355 x 315 mm

Supply and fixing of HDPE Reducer of 315x280 mm

Supply and fixing of HDPE Reducer 280 x 250 mm

Supply and fixing of HDPE Reducer of 250 x 225 mm

Supply and fixing of HDPE Reducer 225 x 200 mm

Supply and fixing of HDPE Reducer 200 x 180 mm

Supply and fixing of HDPE Reducer 180 x 160 mm

Supply and fixing of HDPE Reducer 160x140 mm

Supply and fixing of HDPE Reducer 140x125 mm

Supply and fixing of HDPE Reducer 125x110 mm

Supply and fixing of HDPE Reducer 110x90 mm

Supply and fixing of HDPE Reducer 90x75 mm

Supply and fixing of HDPE Reducer 75x63 mm

Supply and fixing of HDPE Reducer 63x50 mm

Supply and fixing of HDPE Reducer 50x40 mm

Supply and fixing of HDPE Reducer 40x32 mm

Supply and fixing of HDPE Tee 400mm

Supply and fixing of HDPE Tee 355mm

Supply and fixing of HDPE Tee 315mm

Supply and fixing of HDPE Tee 280mm

Supply and fixing of HDPE Tee 250mm

Supply and fixing of HDPE Tee 225mm

Supply and fixing of HDPE Tee 200mm

Supply and fixing of HDPE Tee 180mm

Supply and fixing of HDPE Tee 160mm

Supply and fixing of HDPE Tee 140mm

Supply and fixing of HDPE Tee 125mm

Supply and fixing of HDPE Tee 110mm

Supply and fixing of HDPE Tee 90mm

Supply and fixing of HDPE Tee 75mm

Supply and fixing of HDPE Tee 63mm

Supply and fixing of HDPE Tee 50mm

Supply and fixing of HDPE Tee 40 mm

Supply and fixing of HDPE Tee 32 mm

Providing & fixing of PRV Valve 315 mm dia Material S.S.

Providing & fixing of PRV Valve 150 mm dia Material s.s.

Cement concrete 1:4:8 With Stone Ballast 20mm gauge, Mixing by mechanical means using concrete volumetric mixer.

Providing and Filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work the various sizes of G.I. pipes in external work

Any Other Items

M/s NAVJIWAN BANSAL CONTRACTOR (BID ID -655741)

M/s Kamal Dev Sharma (BID ID -655694)

R S BUILDERS (BID ID -655737)

MITTAL CONSTRUCTION COMPANY (BID ID -655593)

LALIT KUMAR CONTRACTOR (BID ID -655098)