Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹70.3 LAccepted-AOC VILL KISHANPURA P O JAMNIWALA TEHSIL PAONTA SAHIB DISTRICT SIRMOUR HP | PAONTA SAHIB | SIRMOUR | HIMACHAL PRADESH | ₹70.3 L | L-1 | Accepted-AOC Ist Lowest |
| 2 | L-2₹85.1 LRejected-AOC V THANA PO BAROTI SUNDER NAGAR DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | ₹85.1 L | L-2 | Rejected-AOC 2nd Lowest . |
| 3 | L-3₹98.3 LRejected-AOC SHOP NO 5 BACHAT BHAWAN UNA TEHSIL UNA HP 174303 | UNA | UNA | HP | 174303 | ₹98.3 L | L-3 | Rejected-AOC 3rd Lowest |
Tender Value
₹94.5 L
EMD Value
₹1.9 L
Closing Date
6 Mar 2026, 5:00 pmClosed
EXECUTIVE ENGINEER ELECT HIMUDA ELECTRICAL DIVISIO
EXECUTIVE ENGINEER ELECT HIMUDA ELECTRICAL DIVISION SHIMLA
Construction of Admn Block, Male Hostel 60 INMATES and Female Hostel 54 INMATES EPABX System and UPS system therein development of site SH Providing Internal E I work CCTV Camera
2026_HIMUD_129417_1
HIMUDA PP E W 7 2025 2074-83 dt 23.02.2026
Open Tender
Electrical Works
395 days
JUBBAL
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,900
Yes
₹1.9 L
Yes
18 Apr 2026
24 Feb 2026
7 Mar 2026
24 Feb 2026
6 Mar 2026
24 Feb 2026
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in-Charge. Group A.
Group c.
Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in-Charge.
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required and approved by the Engineer-in-Charge.
Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required and approved by the Engineer-in-Charge.
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required and approved by the Engineer-in-Charge .2x 1.5 Sq. mm..
2x 6 Sq. mm..
2x 10 Sq. mm..
2x 16 Sq. mm..
4x 10 Sq. mm..
Supplying and drawing following sizes of Cat-6 Cable cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and drawing following sizes of 2-Pair Cable cable in the existing surface/ recessed steel/ PVC conduit as required and approved by the Engineer-in-Charge.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required and approved by the Engineer-in-Charge.3*1.5 sqmm
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required: and approved by the Engineer-in-Charge. 25 mm. dia
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required and approved by the Engineer-in-Charge. TV. Socket outlet, modular.
Telephone socket
Blanking Plate
Bell Push
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-2 modules (78mmx78mmx50mm)
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required and approved by the Engineer-in-Charge.
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required and approved by the Engineer-in-Charge.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required and approved by the Engineer-in-Charge.
Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-and approved by the Engineer-in-Charge. 300 mm deep (nominal)
Supplying and fixing Copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required: and approved by the Engineer-in-Charge.
Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required and approved by the Engineer-in-Charge.400Amp. -16 KA
200Amp. -16 KA FP
100Amp. -25 KA FP
Providing and fixing following rating and breaking capacity MCCB incluiding cubical panel board and bus bar including drilling holes in the cubicle panel, making connections, etc. as required.100Amp. -25 KA.
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required and approved by the Engineer-in-Charge Single pole. Cat-A.
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.and approved by the Engineer-in-Charge 40 Amps. Cat-A.
MCB DB 63 Amps. Cat-A.
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge. 40 Amps. Cat-A.
RCCB 63 Amps. Cat-A.
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required and approved by the Engineer-in-Charge. Double door-6way
Double door-12 way
Double door-16 way
Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but with charcoal or coke and salt ) complete as required and approved by the Engineer-in-Charge.
Supplying and laying 6SWG GI wire on surface or in recess for loop earthing as required and approved by the Engineer-in-Charge .
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts gradedirect in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.:and approved by the Engineer-in-Charge- Armoured cable 6sq. mm (2 core)
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 25 sq. mm (3.5 core) approved by Engineer incharge.
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 70 sq. mm (3.5 core) approved by Engineer incharge
Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 120 sq. mm (3.5 core) as required & approved by Enginee- in-charge.
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with 15 amp Plug Top ,nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required and approved by the Engineer-in-Charge. 25 ltr cat A
Providing, Installation, testing and commissioning of ceiling fan Elico Prime BLDC fan with regulator and fan box, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required and approved by the Engineer-in-Charge. 1200 mm
Providing, Installation, testing and commissioning of Wall Mounting fan including cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover and earthing etc. as required and approved by the Engineer-in-Charge.
Providing and installation of exhaust fan with lovers and shutters of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: and approved by the Engineer-in-Charge. Exhaust Fan, light duty, 250 mm sweep
Providing and installation of exhaust fan with lovers and shutters of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan,Heavy Duty duty, 300 mm sweep
Providing and installation of following type of LED batten LUMILINEPLUS NEO with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, product code LUMILINEPLUSNEOBS18WLED865SPCSSIND complete with all accessories, including mounting clamps, connections, testing etc. as required: & approved by Engineer incharge
Supplying and fixing of fancy wall bracket suitable for input voltage: AC 220- 240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: of Approved Make Wall light fixture Polycarbonate body, suitable for 9 W retrofit LED lamp E27 base.as required: & approved by Engineer incharge
Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, nonintegral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, PRODUCT CODE BPSLR Recess/surface 12W LED WH SQ SD complete with all accessories, connections, testing etc. as required: of Approved Make
Providing and fixing efficient led Surface 1X1 luminaire to anhance the delight of accupants with comfertable experience through its clasic design & glare free soft illumination 18W W LED of bajaj or equivalent make as required and approved by the Engineer -in -charge
Providing and fixing efficient led Surface/recess 2X2 luminaire to anhance the delight of accupants with comfertable experience through its clasic design & glare free soft illumination 36W W LED of bajaj or equivalent make as required and approved by the Engineer -in -charge
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the trench, for 70 sqmm armoured cable complete as required.
Providing and fixing Instant geyser with product code GHWAIAV003 of Capacity 3 Ltr /3 KW havellsor equivalent make as required and approved by the Engineer-in- Charge.
Providing and fixing LED tube 5 W LED 6000 K Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate product code LHEXBLP7IN1W005 cool white of Havells or equivalent make as required and approved by the Enginner-in-Charge.
Supplying and fixing of Led lamp9 watt of Havells and equivalent Make as required approved by engineer incharge
Supplying and fixing of HEXA 10 W IP66 Bulk Head Product code HEXAFT10WLED857SSYMBOPC of havells and equivalent Make as required approved by engineer incharge
Providing and fixing of 20 KVA UPS System Single Phaser Input Output a/w minor accessories of Vertiv or equivalent make as approved by Engineer in charge.
Providing and fixing of SMF 42 AH Battery Luminus or equivalent make as approved by Engineer in charge.
Providing and fixing Rack and Interconnector for32 Battery as approved by Engineer in charge.
Providing and installation of 16 port networking switch with 4U rack as required and approved by Engineer- in -charge.
Providing and installation of I/O Box havells or equavalent make as required and approved by Engineer- in -charge.
Providing and fixing Crystal Digital EPABX System DB-32 Having 12 extension Nos. and 1 Jun line with key telephone operator console expentable to 32 ports as required and approved by the engineer-in-charge.
Providing and fixing Beetal clip phone (M-71) as required and approved by the engineer-in-charge.
Providing and fixing 20pair Krone MDF as required and approved by the engineer-in-charge.
Providing and installation of 8 channel HDNVR of CP Plus and equivalent make as required and approved by Engineer in charge.
Providing and installation of 2 MP IR HD Bullet/Doom Camera Night vision with Junction box and BNC connector of CP plus or equivalent make as required and approved by Engineer in charge.
Providing and installation of 16 Port 10 Amp Power supply for CCTV camera of Dlink Or equivalent as required and approved by Engineer in charge.
Providing and installation of 1 TB Hard Disk of WD or equivalent make as required and approved by Engineer in charge.
Providing and installation of 32" Led Screen of LG or equivalent make as required and approved by Engineer in charge.
Providing and fixing of Lux Max Pole with anchor bolts and fish plates product code lux max Luxmax SP-140-300 With Decorative brackets 40 watt LED Lux max BKT-208 of Twinkle or equivalent make as required and approved by the Engineer-in- Charge.
Providing and installation of street light Timer panel Timelite-32A pole/230V-Digital Time switch of Indoasian or equivalent make as requird and approved by the Engineer-in-charge.
Providing, and laying HDPE Double Wall Corrugated pipe OD 40/32 mm for cable Laying as required and approved by Engineer in charge.
Providing and installation of Copper lightning arrestor as required and approved by the Engineer-in- Charge.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and approved by the Engineer-in- Charge.
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required and approved by the Engineer-in- Charge.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)as required and approved by the Engineer-in- Charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
technical_191335.pdf
techsummary_191335.pdf
finance_191335.pdf
finsummary_191335.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
NITSIEMAT.pdf
Tender Documents • 0.64 MB
Form6and8.pdf
Tender Documents • 2.77 MB
latstspecification.pdf
Tender Documents • 0.16 MB
UNDERTAKING.pdf
Tender Documents • 0.29 MB
BOQSIEMAT.xls
Tender Documents • 0.32 MB
Download all tender documents and submit your bid