80923 PROVISION OF SPECIAL REPAIRS AND ADDN/ALTN TO COAST GUARD OFFICERS MESS AT PORT BLAIR

Amount

Taking down old plaster on walls, by chipping, chiseling upto depth of 20 mm thick average and removing the debris from the site and cleaning the surface with clean water etc. completely.

M & L for applying polymer modified cement mortar rendering 20mm mm thick in cement mortar 1:3 using river sand on wall/beam/column/ceiling, surface finished even and smooth without using extra cement mixed (Nito Bond- SBR of FOSROC @ of 5 Ltrs per Bag of cement ) / Equivalent of Dr Fixit of Pidilite Industries over a coat of epoxy primer of Nito bond - AR of FOSROC / Equivalent of Dr Fixit of Pidilite Industries Ltd or equivalent make of M/s MC. Bauchemie, on exposed concrete/wall surface for bonding the old surface with new treatment as per Manufacturer's instruction complete all as specified and as directed by Engr-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.

M&L for Formwork to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat complete all as specified.

M&L CRS TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I)

M&L RCC 1:11/2:3 using 20 mm graded stone aggregate in Chajjas, balconies, canopies and in shelves and the like complete all as specified.

Demolition of PCC Block masonry built in cement mortar.

M & L for PCC solid block, masonry exc 10 cm width in PCC l:3:6 type C1 using 20 mm graded stone aggregate built in CM 1:6 complete all as specified.

M&L for Providing precast cement concrete solid building blocks 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete in wall set in CM 1:4 precast cement concrete type C0, 1:3:6 (12.5mm graded aggregate) complete all as specified..

M&L rendering 15mm thick in two coats, 5mm thick in CM 1:4 over 10mm thick in CM 1:6 on concrete surfaces finished even and smooth without using extra cement complete all as specified.

Supply only integral water proofing compound.

M&L 10mm thick plaster in CM 1:6 on concrete surfaces finished even and fair without using extra cement.

Taking down / removing of wooden window frame with shutter n.exc. 1.5 Sqm each

M&L for Powder coated aluminium partition, window, door and ventilator frames and shutters of sliding / openable / fixed / fully glazed with glass or gauze and panel with 12 mm thick prelaminated particle boards, 5.5 mm thick glass inserts side hung type without sash bars using standard aluminium sections including necessary jointing cleats, glazing clips, rubber packing, Powder coated / anodiszed aluminium fittings such as handle ,required hinging system all aspecified in the size of aluminium section Note:- Supply only Glass, particle board, gauge will be measured and paid separetely

Supply only sheet glass, 5.5 mm thick ordianary quality in required size,

Supply only prelaminated particle board 12 mm thick interior grade prelaminated on both sides with decorative choice lamination.

Supply only aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm.

S&F Factory made UPVC Openable/sliding Windows of extruded profiles, frames and sash will be mitered (45 degree) cut and fusion welded at all corners including 6mm thick toughned glass, Designed Handles (Inner&Outer),EPDM gasket, necessary hardware fittings and including drilling of holes for drainage of water complete all as specified by Manufacturer's instruction. (Make: FENESTA or Equivalent)

Taking down chowkats or frames (Without taking of shutters) exceeding 1.5 Sqm and not exc 4 Sqm each.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube ,all as per specifications and drawings given in SSR part - II.

S&F Factory Made Solid PVC Moulded Door Shutters with particle board core of 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F 100mm aluminium anodised barrel tower bolts of extruded section

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,anodised ,type C-21

S&F aluminium bow handle cast type anodised 100 mm long

M&L for 12mm thick MDF board exterior grade with decorative laminate type1 of surface finish, colour and design as approved & fixed with approved adhesive as per manufacturers instruction complete all as specified.

M&L for plain fillets square rectangular or triangular in section exc 13 Sq cm & not exc 25 Sq cm clean sawn secured with nails or beads complete all as specified.

Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering.

S&F for pre-painted Galvalume steel sheets of Trapezoidal profile having pitch 190mm, depth 29mm and thickness 0.50mm (Galvalume base-PPGL trapezoidal profile sheets) fixed with self tapping screws neoprene and EPDM washers of suitable size in roof covering all as specified. Note : Over lap shall be provided as specified by the manufacturer.

S&F for pre-painted aluminium zinc steel sheets (Galvalume base-PPGL profile sheets) of thickness not less than 0.50mm in ridges, hips, valley gutters, drip and straight flashing cut to length & bent to shape girth sheets fixed with aluminium self staging screws of size 50/75mm and aluminium wahser of suitable size in roof covering all as specified.

M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering.

M & L for Bands strap, supports, stays for rain water ,ventilating pipes, including bolts, if required, hookes (stay), heavy for large gates, hook and pintel hinges, large hasp & staples, chains, hand mande sliding bolts, clamps, hold fasts, hookes for hanging fan, plain angle cleats for securing purlins to wood trusses or rafters knee pieces inserts, two way and three straps, plate washers and similar small articles coforming to Fe-410-0

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F joist, channel, angle, flat iron or tee sections, fixed independently, without connecting plates, etc Fe 410-W (Gde E-250) quality-A

S&F Rolled sections as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tile to store and rubbish of the permisses complete all as specified and directed.

M&L screed bed or beddding layer of cement mortar 20mm thick for laying floor finishes in cm 1:4 complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on verticle surfaces as backing coat for dado tiling work.

M&L for vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles as on verticle surfaces as skirting and dado etc complete all as specified .

M&L for non- skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Vitrified Ceramic tiles (Rustic) 10 mm thick (Square/rectangular) double charged polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms , flooring and like, over and including 20mm thick in CM(1:4) as bedding layer including designing of granite joints with brass strips of size 20mm x 5mm and like, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed by Engineer-in-Charge.

Taking down GI tubing 15mm dia, connections on walls / roofs including cleaning for refixing or removal to store/credit.

Taking down GI tubing 20mm dia, connections on walls / roofs including cleaning for refixing or removal to store/credit.

Supplying & fixing 15 mm thick Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., including fittings such as elbows, sockets tees, reducer etc..

S&F GI tubing medium grade 20 mm bore with all fittings & fixed to wall & ceiling or laid in floors.

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe.

Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy (Make-Jaquar Cat. No. Con-053KN) or equivalent complete all as specified and directed.

S&F in repair 15mm pillar cock lift type brass chromium plated screwed down high pressure and fixed as in Bathrooms etc Make : Jaquar Code No : FLR-5015 or equivalent complete all as specified and directed.

Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed. (Make-Jaquar Cat. Con-281KN)

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long body (Make-Jaquar Con-107KN) complete all as specified and directed.

S&F in repairs CP overhead shower dia 105 mm round with revolving joints (with body rotation) & 195mm long arm shower with rabit cleaning system and all fittings Make - Jaquar OHS-1709 as approved.

S&F in repair Toilet paper holder of Make : Jaquar Code (ACN-1153N) or equivalent complete all as specified and directed.

S&F in repair CP Towel ring round of Make : Jaquar (AQN-7721) or equivalent complete all as specified and directed.

S&F in repair CP Single Towel Rail 600 mm long of Make : Jaquar (AQN 7711) or equivalent complete all as specified and directed.

S&F in repair Glass Soap dish of Make :Jaquar Code (AQN-7731) or equivalent complete all as specified and directed.

S&F CP brass 15mm health faucets with 1 mtr tube and hook with metalic expandable tube 15mm complete set of Make : Zim Cat No. 1624A or equivalent complete all as specified.

S&F CP Jet spray Multi purpose 15 mm for bath room complete set Make Zim (Cat No. 1712) or equivalent complete all as specified

S&F in repairs CP concealed stop Cock with wall flange incl all fittings of Make : Jaquar Cat No. CON - 083 KN or equivalent complete all as specified

Supply and fix in repair CP grating 100 mm dia complete all as specified .

Supply and fix in repairs Designed curtain rods 20mm dia with brackets & end post fancy type all as directed .

S&F in repairs vitreous china ware wash down water closet pan (pedestal patern) white first quality with ' P' trap including 10 litre capacity Flush tank& fittings complete all as specified and directed (Make- Somany Cat Pt No. 120119) or equivalent.

Supply and fix in repairs vitreous china WHB white flat back size 630 x 450 mm rectangular shape approved brand excluding taps waste chain complete all as specified. (Make- Somany Cat No. 110428) or equivalent.

Supply and fix in repairs vitreous china urinals white flat back size 630 x 375 X 315 mm approved brand excluding taps waste chain complete all as specified. (Make- Jaquar Cat No. URS-WHT-0702) or equivalent.

M & L for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion weather paint over a coat of cement primer on wall surfaces.

M & L for preparation of new plastered surfaces of walls & applying two coats of oil emulsion distemper over a coat of chalk whitening

M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc primer

M&L for complete removal of old treated surfaces of ceiling and applying two coat of oil bound distemper over a coat of chalk whitening

M&L for complete removal of existing treatment and cleaning the surface, levelling the surface using cement putty 3mm thick and applying two coats of exterior emulsion paint over a coat of primer.

M&L for complete removal of existing treatment and cleaning the surface, levelling the surface using cement putty 3mm thick and applying two coats of oil emulsion distemper over one coat of primer.

M&L preparing of old surfaces of wood and wood based material and applying one coat of synthetic enamel paint

M&L Brass barrel tower bolt, with cast or sheet barrel and rolled or cast bolts 200mm long and fixed.

M&L Brass sliding door bolt 300mm long with sand or die cast brass hasp staples (bolt type) and fixing bolt with rolled or drawn brass bolts (dia of bolt not less than 16 mm) and fixed

S&F 100 mm butt hinges extruded brass, with mild steel hinge pin, bright polished, type B-1

S&F 150 mm size brass handles, fabricated type polished.

S & F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate150mm.

S&F in repairs door closer hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed aluminium (Die cast ) body.

Dismantling wall & ceiling boards (fibre, insulation, asbestos etc) or insulation boards, slabs, blankets any thickness.

S&F snap grid aluminium false ceiling of 6mm thick Fibre cement board of any colour as approved by GE as in ceiling with design/ stepped fixed in position with suitable screws / fasteners as per manufacturers instructions with aluminium section of size 50x25x1.5mm thick, 60cm c/c including cutting, drilling, jointing and fixed with screws/fasteners etc.. complete including provision of 3.15mm dia GI wire suspenders fixed with adjustable connectors complete all as specified. Make : SHERA of M/s Mahaphant Fibre Cement Pvt Ltd or its equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated plain basket of size 380x508x150mm or 370x485x150mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated plate basket of size 380x508x150mm or 370x485x150mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated partition basket of size 380x508x150mm or 370x485x150mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated glass basket of size 380x508x150mm or 370x485x150mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated Cutlery basket (with perforated bottom sheet) of size 380x508x100mm or 370x485x100mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated Cup& Saucer basket of size 380x508x100mm or 370x485x100mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated plain basket of size 380x508x200mm or 370x485x200mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated plate basket of size 380x508x200mm or 370x485x200mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated pull out basket of size 560x508x150mm or 585x485x50mm including telescopic channels required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

S&F Stainless Steel (AISI 304 grade) non magnetic multi layer feuba nickle chrome plated dust bin as required complete all as specified. Make: Hettich/ Pearl / Evershine or Equivalent.

M&L aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0micron fixed over frame of aluminium tabular section 50x25mmx 2.0mm thick, including powder coated aluminium partition frames and shutters of sliding / openable / fixed / fully glazed with glass panel with 5.5 mm thick tinted glass in structural Glazing duly fixed to wall/ceiling with expansion fastener, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall etc. complete as specified and as directed. Note : Necessary MS scaffolding required for work shall be deemed to be included in the quoted rate (Appx hight 10 Mtr from GL)

S&F 1.0mm thick Stainless Steel box type writing letters (Block, Roman, Italic or Indian) of size 450mm Height, 50mm to 70mm width and 30mm to 50mm depth to wall surfaces including necessary drilling / punching in wall and including necessary sealant etc. complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces of walls and applying 2 to 3 mm thick wall care putty for levelling the surface and applying two coats interior emulsion paint (Texture painting) over a coat of alkali resistant primer.

S&F plain solid straight chowkats of rubber wood (Rubco wood )frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified .

S&F plain, framed, panelled shutters with 24 mm thick panels of rubber wood panels, thickness of battens 35mm, using superior quality chemically treated edge glued, finger jointed rubber wood duly finished with two coats of normal colour melamine polish over one coat of natural colour wood filler putty etc including preparing with sand paper etc and finishing to match with the adjoining interior. Make of rubber wood members: RUBCO or equivalent

M&F 18 mm thick rubco huat rubwood in built up interiors as in cupboards, shelves wall lining, box structure and including all fitting items complete all as specified and directed. After completing the carpentry works all the visible woods area will be sanding by No.60 & 80 Wood Sanding Paper, after that will be applying Sheenlac make Filler with mixing of NCD Thinner (Sheenlac make), then pasting Chock Putty in the shabby/nailing area which will be sanding with No.120 Sanding Paper, after that will applying Sealer of Sheenlac make and walnut colour stainer, then cutting with No. 320 Sand Paper, after completing the above process will spray Melamine Polish of Berger/Sheenlac make then cutting with No.400 Sanding Paper. Finally will applying Silicon make: Waxpol with soft Banyan Cloth for better shining/finishing. Make of rubber wood members: RUBCO or equivalent

M&L for designer multi stepped suspended false ceiling with and including 12.5mm thick gypsum board, consisting of intermediate channel of 45x15x0.9mm thick for ceiling (frame work shall be suspended from soffits of roof with rawl plugs) finally joints shall be filled with jointing compound and paper tape and surface finished smooth including applying two coats of acrylic distemper.

S&F designer POP cornice of desired colour with cross section not exceeding 1800 Sqmm and finishing of connected wall surfaces (300mm both side) to match with existing wall finish.

S&F 12mm thick toughened glass in required size duly crystal polished at the edges and with full etched design finalized by GE in different colours fixed with stainless steel brackets of size 50x25mm, 100mm long made out with 3mm thick SS sheet at the top and bottom, Dorma X:C fittings & Dorma floor springs, stainless steel handles 600mm D type, stainless hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as directed

S&F 12mm thick toughened glass in required size duly crystal polished at the edges and with full etched design finalised by GE in different colours fixed with stainless steel brackets of size 50x25mm, 100mm long made out with 3mm thick SS sheet at the top and bottom, stainless hinges& brackets to connecting to SS railings glass to glass, wall to glass connector, magnetic seal, middle seal etc all as directed.

S&F stainless steel tubing of any diameter or square or rectangular in shape, thickness of wall not less than 3.15mm of grade AISI-316 (type Austenitic anticorrosive in nature as in railings / grills / designer work including cutting, bending, welding and fixing in any type of location complete all as specified

S&F Glass Shower Panels of 8mm thick toughened/tampered glass panels & door including kubix thermostatic concealed high flow control valve, 4-way diverter for multiple shower, body shower of 130mmx120mm rectangular shape (ABS Chrome plated face plate) with installation box & rubit cleaning system, water fall over head shower 550x230x25mm flat shape dual flow with concealed installation kit & 600mm long towel rail with lower hangers complete all as specified . Make: JAQUAR 1840-L all set or Equivalent.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs with MCB/MCCB 415 Volt/230 Volt

Taking down light fittings of any type complete all as directed .

Taking down old aluminium sub main wiring of any size.

M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLS PVC insulated , unsheathed, multi stranded copper conductor FRLS cable with proper colour coding phase red/yellow/blue, neutral black and earth green drawn through and including medium grade, rigid , non-metallic PVC conduit of size not less than 20mm dia, with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete all as specified for the following :- Make : Gloster/ Finolex/ Havells/ Anchor/ Polycab

One light/Ceiling fan/Exhaust fan point controlled by one modular switch 5 Amps one way.

Two light points controlled by one 5 Amp moduar switch one way

Three light points cantrolled by one 5 Amp moduar switch one way

One modular 3 pin 5 Amp socket out let on independent board.

One modular 3 pin 5 Amps switch socket on same Board

One light point controlled by two 2-way modular switches,

One bell point controlled by one modular bell push switch 5 Amps one way.

All as per item No.5 above but point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let and Geyser and one run of 4.0 sqmm cable for earth in green colour on independent board.

S & F modular switch 6/10 Amp one way 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F modular switch 6/10 Amp two way switch 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F modular switch 16/20 Amp one way 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F modular socket outlet 6/10 Amp intel multi socket for all pins 230 V AC. Make : ROMA(Anchor)/Havells (Crabtree) / Legrand

S & F modular socket outlet 16/20 Amp socket heavy duty 230 V AC Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F modular stepped type electronic fan regulator 120w-2 module on the existing phenolic laminated sheet as per speicifed.Make: Roma(Anchor)/Legrand/Havells Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F modular bell push 5Amps flush type 230v, 50Hz AC. Make : ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.

S&F , Electric Bell, Ding dong type working on 230 volts AC supply complete all as directed. Make: Anchor/Kinjal/Standard

S&F , electronic dimmer 450W,250v flush type on existing phenolic laminated sheet etc. Make: ROMA(Anchor)/Havells (Crabtree)/Legrand

S & F communication modules for TV socket sap code no.ACAKTOW000. Make: Havells(crabtree)/Anchor/Bajaj

S & F communication modules for tele socket RJ 11 2 Gang Tele socket sap code no.ACAKRTW112. Make: Havells (crabtree)/Anchor/Bajaj

Supply and laying of rigid non metallic PVC conduit of 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reduses, bell mouth tube ends and fixing accessories such as couplers lock nuts, saddles pipe hooks etc all as directed.

Taking down carefully ceiling fan of any make, size form its location, handed over to AGE E/M store yard without any damage and S & F Ceiling fan 5 star rated, 1200mm sweep, of model No.ES-50 5* (white colour) working on single phase 230 volts, 50Hz AC supply complete with down rod and canopy including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size of 0.75 sq mm complete all as directed. Make: Havells (Model No. ES-50 5*)/Bajaj/CG/ gorilla Model No Pearl white

Taking down carefully Exhaust fan of any make, size form its location, handed over to AGE E/M store yard without any damage and S & F Exhast fan 380 mm sweep, 900 RPM of model Turbo force working on single phase 230 volts, 50Hz AC supply complete with including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of suitable size of 0.75 sq mm complete all as per directed. Make: Havells (Model Turbo Force SP)/Gorilla/CG/Usha/CG

Taking down carefully wall mounted fan of any make, size form its location, handed over to AGE E/M store yard without any damage and S & F wall mounted fan 400 mm sweep, of model swing working on single phase 230 volts, 50Hz AC supply complete with including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of suitable size of 0.75 sq mm complete all as per directed. Make: Havells (Model swing)/Bajaj/Gorilla/CG/Usha/CG

Taking down carefully Water heater (Geyser) of any make, size form its location, handed over to AGE E/M store yard without any damage and S & F Energy Efficient BEE 5 star rated water heater (geyser) storage type of 25 liters capacity, vertical electric supplied and installed complete including flexible pipe for hot and cold water, dead weight pressure release valve, Anchor fastner - 4Nos of suitable size all as directerd by Engineer-in-charge. Make: Havells(Model: Puro Turbo)/Bajaj/Racold.

Supply and fixing of surface mounted ultra slim linear LED lighting fixture of 18 Watt 6000K, 220V , 50Hz with extruded Polycarbonate, Aluminium heat Sink ,environmental friendly energy efficient fitting surface mounted round in shape complete all as specified and directed. Make - CG cat No. LCDSPL-R-18- CDL or equivalent in Philips/bajaj/Havelss

M & L for sub main wiring with FRLS PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 4 runs of 10 sqmm & 2 run of 10 sq.mm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 25mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Make : Gloster/ Finolex/ Havells/ Anchor/ Polycab Note: (i) six runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.

M & L for sub main wiring with FRLS PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 2 runs of 6 sqmm & one run of 4 sq.mm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 25mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Make : Gloster/ Finolex/ Havells/ Anchor/ Polycab Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.

M & L for sub main wiring with FRLS PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 2 runs of 4 sqmm & one run of 4.0 sq.mm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 25mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Make : Gloster/ Finolex/ Havells/ Anchor/ Polycab Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads.

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways. Make: Legrand/L&T/Havells/ABB/Indo Asian

S & F tripple pole and neutral sheet steel powder coated Distribution board vertical type for MCCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TP&N DB system F2+12 ways Make: Legrand/L&T/Havells/ABB/Indo Asian

S& F MCCB four pole , 125 Amps, 16 KA , 240 volts, Make: Legrand/L&T/Havells/ABB/Indo Asian.

S & F MCB SPN,40 amps, 16 KA , 230 volts , all as directed. Make: Standard /L&T/Havells/Indo Asian

S & F RCCB double pole,40 amps, 16 KA , 230 volts ,30 MA all as directed. Make: Standard /L&T/Havells/Indo Asian

S& F MCB SP , 6-32 amps, 10 KA , 240 volts , Make: Legrand /L&T/Havells/ABB/Indo Asian

S&F of wall mounted 24watts LED tube light fitting with LED Batten in extended aluminium housing with diffuser model No LCCLB24-CDL all as Specified and directed. Make: CG/ Philips/ Havells

S & F surface mounted 14 watts LED sleek with high output diffuser all as specified and directed. Make: CG(cat no. LCL-14 -CDL)/Havells/Phillips/equivalent in Bajaj

S&F 18watts recessmounting LED light fitting in square shape with die cast aluminium housing finish in premium while powder coating efficiency 100/m/w edge lit luminaire suitable for armstrong/grid ceiling complete with separate electronic driver type of fitting 18watts LED downlight all as directed. Make: CG (Cat part no. LSCSM-18W-CDL)/Phillips Model No : Astra Max Metal Panel/Havells..

S & F indoor recess mounting LED fitting of capacity 09 watts 6000K compact vertical, round shaped downlighter with removable driver suitable for low ceiling heights working on 230volts 50Hz AC supply of all as specified & directed. Make: Philips(DN192B LED 9S-6500 PSU WH S1)/CG/Havells

S&F Energy efficient Recess mounted 15watts LED 1`x1` luminaire with elegantly designed extruded al. Bottom frame & MS powder coated white housing complete with separate electronic driver of model ENDURA FLAT PANEL 15W working on single phase 220volts, 50Hz AC supply all as specified and directed. Make : Havells(cat no.PLUTO1X1PLR 15W LED840S)/CG/Bajaj/Phillips

S&F 15watts LED Pendant mount downlight with integral driver with 36degree beam angle, the body made up of CRCA with powder coated white finish of model CYLINDRO working on single phase supply 220volts 50Hz AC all as specified and directed. Make: Havells(cat no.CYLENDROTSS15W 830S24 DWHT) /Havells/Bajaj/Phillips.

S & F 7W LED (NOVASTAR NEO) energy efficient 1x7W 6000K (white colour) LED spotlight for low ceiling height applications round in shape with steel round panel pressure die-cast aluminium housing, spring loaded clips for easy mounting complete all as directed. Make Havells (Model No. LHEEAYPFMH1E007) or equivalent in Philips/CG

S & F 9W (CRYSTA COB SWIVEL) energy efficient 1x9W 3000K (yellow colour) LED spotlight for low ceiling height applications round in shape,with steel round panel pressure die-cast aluminium housing, spring loaded clips for easy mounting complete all as directed. Make Havells (Model No. LHEEGEPBIE1W009) or equivalent in Philips/CG

S&F 34Watts LED light fitting with Energy efficient Ultra modern, compact surface mounted luminaire in MS housing with opal diffuser & complete with electronic driver & high brightness SMD LEDs of model PLUTO FLAT PANEL (SURFACE) working on single phase 220volts 50Hz AC supply all as specified and directed. Make: Havells(cat no. PLUTOSURFACE2X2PLS34WLED857S)CG/ Phillips/Bajaj

S&F Energy efficient 24watts Flexible LED strip, with wide viewing angle for good light distribution & IP20 protection, linkable and easy to install, complete with separate replaceable driver of model LED FLEXI STRIP IP40(with driver) in Blue colour all as specified and directed. Make: Havells(cat no. FLEXISTRIP5MTRIP2024WLED83OS)/CG/ Phillips/Bajaj

S & F of Starter switch of capacity 25 amps, working on 240 volts AC supply, suitable for air conditioner. Make : (Crabtree: Cat part No.ACAO252504)Anchor/standard

S&F 25watts LED building security light fitting with aesthetically designed COB LED ensure efficient optics and uniform distribution of light, for street light application. Pressure die cast aluminium housing powder coated in graphite grey and toughened glass of IP 65, including necessary fixing arrangements as per site requirements class-1 of model : Freedom of make CG all as directed . Make: CG(cat part Noo.LSTS-25-CDL)/Havells/Phillips Cat Part No : BROP42LED14CWMRSIPSU GR/C&S Cat Part No : LTESSE25WLED/Bajaj.

S & F 50watts LED flood light fitting IP-65 luminarie comprise of elegantly designed highly efficent pressure die cast aluminium housing with fins for better heat dissipation. including necessary fixing arrangement as per site requirement. The cradle is provided for mounting purpose of model Profile I of make CG all as directed. Make: CG(LFLE-50-CDL)/Havells/Phillips/Bajaj.

S&F 1x8watts decorative wall mounting SS finish fixture with opal glass diffuser suitable for 40watts mini GLS lamp or 8watts TU retrifit CFL of model VENZA working on single phase 220volts, 50Hz AC supply all as specified and directed. Make: Havells (cat no.LHJC02108499)/CG/Bajaj/Phillips

S&F 200watts LED flood light luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP 66 of model turbo of make bajaj all as directed. Make: CG(cat no. LSFO-200-CDL)/Havells/Bajaj equivalent in Phillips.

Taking down carefully existing window/split type air conditoner of any make,type,size and any tonnage keep in safe custody of contractor and painting the outer area and re-fixing the same its location after completion of work all as directed.

S&F 4M LED foot light fittings (Horz) stripes model / cat part No.ACAPFCWL04. Make:Havells(Crabtree, cat part No.ACAPFCWL04)/CG/Phillips equivalent in Bajaj.

S & F LED Exit with right arrow double side display of 3W (with 2 hours battery backup) . Make: Bajaj(Cat no. 111510) Havells(Crabtree)/CG/Phillips.

Supply and fixing GI bracket of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building security light all as specified and directed.

Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 mm dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron incl test point 75x75x25mm and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh. CI cover with frame etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

kakolil trade agencies

Vandana Enterprises

ACME Consultants

Gulmarg Electrical Service

Sree Tirumala Enterprises

M/s Ramesh Lal