Agasan, Nilje, Taloja, Navde Road, Kalamboli (Total 05 Stations - All SG 3 Category Stations) - Raising /Resurfacing of Platforms.[IRPSM ID: 01.02.53.25.3.51.014]

1-Agasan, Nilje, Taloja, Navde Road, Kalamboli (Total 05 Stations - All SG 3

Raising /Resurfacing of Platforms.

Item- 1 DSR-Items

S No. Item Description of Item Unit Qty Rate Amount

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete of

4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived cum 937 7878.5 7382154.5

1 from natural sources : 4 graded stone aggregate 20

mm nominal size derived from natural sources)

Centering and shuttering including strutting,

propping etc. and removal of form work for :

4.3.2 Retaining walls, return walls, walls (any thickness) Sqm 351 842.5 295717.5

2 including attached pilasters, buttresses, plinth and

string courses fillets, kerbs and steps etc.

4.5S CEMENT CONCRETE PRECAST

Providing and fixing up to floor five level precast

cement concrete solid block, including hoisting and

4.7 setting in position with cement mortar 1:3 (1 cement

: 3 coarse sand), cost of required centering,

shuttering complete :

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from natural

5.0 REINFORCEMENT CEMENT CONCRETE

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

5.22A straightening, cutting, bending, placing in position

and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D Kg 9370 107.85 1010554.5

6.0 MASONRY WORK

6.1S General

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level

in all shapes and sizes in :

8.0 CLADDING WORK

8.1S General

Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required

size, approved shade, colour and texture laid over

8.2 20 mm thick base cement mortar 1:4 (1 cement : 4

coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all

8.2.2 Granite stone slab colour black, Cherry/Ruby red

Granite stone slab all colour and texture except

black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble

stone counters, Vanities etc., including machine

8.3 polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-

10.0 STEEL WORK

10.1S General

10.2 Structural steel work riveted, bolted or welded in Kg 38125 133.7 5097312.5

built up sections, trusses and framed work, including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer all complete.

11.0 FLOORING

11.16S TILE FLOORING

Chequered precast cement concrete tiles 22 mm

thick in footpath & courtyard, jointed with neat

cement slurry mixed with pigment to match the

shade of tiles, including rubbing and cleaning etc.

complete, on 20 mm thick bed of cement mortar 1:4

(1 cement: 4 coarse sand).

12 11.20.1 Light shade pigment using white cement Sqm 4212 1402 5905224

11.26S KOTA STONE FLOORING

Kota stone slab flooring over 20 mm (average) thick

base laid over and jointed with grey cement slurry

11.26 mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

13.0 FINISHING

13.11S CEMENT PLASTER IN TWO COATS

13.11 18 mm cement plaster in two coats under layer 12 Sqm 210.6 518.55 109206.63

mm thick cement plaster1:5 (1 cement : 5 coarse

sand) finished with a top layer 6 mm thick cement

plaster 1:6 (1 cement : 6 fine sand).

13.44S EXTERIOR FINISHING

Finishing with Deluxe Multi surface paint system for

13.48 interiors and exteriors using Primer as per

manufacturers specifications :

13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 Sqm 210.6 193.7 40793.22

15 sqm over and including one coat of Special primer

applied @ 0.75 ltr /10 sqm

13.48.3 Painting Steel work with Deluxe Multi Surface Paint Sqm 2025 170.7 345667.5

to give an even shade. Two or more coat applied @

16 0.90 ltr/10 sqm over an under coat of primer applied

@ 0.80 ltr/10 sqm of approved brand and

15.0 DISMANTLING AND DEMOLISHING

15.1S General

Demolishing cement concrete manually/ by

mechanical means including disposal of material

within 50 metres lead as per direction of Engineer -

15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 645 2434.25 1570091.25

equivalent design mix)

15.3 Demolishing R.C.C. work manually/ by mechanical cum 68 3551.25 241485

means including stacking of steel bars and disposal

of unserviceable material within 50 metres lead as

per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material and

disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

Dismantling steel work in single sections including

dismembering and stacking within 50 metres lead in:

Dismantling tile work in floors and roofs laid in

15.23 cement mortar including stacking material within 50

23 15.23.2 For thickness of tiles above 25 mm and up to 40 mm Sqm 15555 113.35 1763159.25

16.0 ROAD WORK

16.49S MISCELLANEOUS

16.75 Providing and laying C.C. pavement of mix M-25 with cum 5200 9823.8 51083760

ready mixed concrete from batching plant. The

ready mixed concrete shall be laid and finished with

screed board vibrator , vacuum dewatering process

and finally finished by floating, brooming with wire

brush etc. complete as per specifications and

directions of Engineer-in-charge. (The panel

shuttering work shall be paid for separately).

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

16.81 Providing and erecting 2.00 metre high temporary Metre 440 3439.5 1513380

barricading at site; each panel of size 2.50mx2.00m

made of 40x40x6mm angle iron or 50x50x3mm

hollow MS tube posts/horizontal members/bracings

covered with 1.63mm thick MS sheet. The sheet shall

be fixed with 30x5mm MS flat by suitable

welding/riveting. The panels shall be made so that

gap of 50cm above the ground is available making

overall height as 2.5m. MS channel ISLC 75 @ 5.70

kg/m, 50cm long shall be provided at the bottom

having oval shaped holes of size 50x25mm at both

ends with 50cm long MS angle 40x40x6mm bracing.

Suitable arrangement shall be made to fix the

barricading to avoid from overturning by providing

250mm long expansion fasteners at both ends. The

work shall be executed as per drawing/direction of

Engineer-in-Charge which includes writing and

painting, arrangement for traffic diversion such as

traffic signals during construction at site for day and

night, glow lamps, reflective signs, marking, flags,

caution tape as directed by the Engineer-in-Charge.

The barricading provided shall be retained in position

at site continuously including shifting of barricading

from one location to another location as many times

as required during the execution of the entire work

till its completion. Rate include its maintenance for

damages, painting, all incidentals, labour materials,

equipments and works required to execute the job.

The barricading shall not be removed without prior

approval of Engineer-in-Charge..

16.90 Providing and laying tactile tile (for vision impaired Sqm 1053 2017.6 2124532.8

persons as per standards) of size 300x300x9.8mm

having with water absorption less than 0.5% and

conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as

26 footpath, court yard, multi modals location etc., laid

on 20mm thick base of cement mortar 1:4 (1 cement

: 4 coarse sand) in all shapes & patterns including

grouting the joints with white cement mixed with

matching pigments etc. complete as per direction of

Engineer-in-Charge.

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, and all CPVC plain & brass threaded

fittings, including fixing the pipe with clamps at 1.00

m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of

joints complete as per direction of Engineer in

Charge. ( Internal work - Exposed on wall )

18.15S BRASS FITTINGS

Providing and fixing ball valve (brass) of approved

18.18 quality, High or low pressure, with plastic floats

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass long body bib cock of

18.51 approved quality conforming to IS standards and

weighing not less than 690 gms.

Providing and fixing C.P. brass stop cock (concealed)

18.52 of standard design and of approved make

conforming to IS:8931.

18.54S PTMT FITTINGS

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Providing and fixing PTMT bib cock of approved

quality and colour.

18.54.1 15 mm nominal bore, 86 mm long, weighing not less Each 250 125.6 31400

Providing and fixing PTMT stop cock of approved

quality and colour.

18.55.1 15 mm nominal bore, 86 mm long, weighing not less Each 250 118.5 29625

19.0 DRAINAGE

19.1S STONE WARE PIPES AND FITTINGS

Providing and laying non-pressure NP2 class (light

duty) R.C.C. pipes with collars jointed with stiff

19.6 mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc.