Loading…
Loading…
Tender Value
₹16.7 L
EMD Value
₹33,500
Closing Date
28 Sept 2026, 9:00 am6d left
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B AND R BR JALANDHAR CANTT
RESTORATION OF ROAD CUT ON LINK ROAD FROM ALIPUR TO USMANPUR (RD 0.00 TO 0.483KM) (ROAD CODE J06120)
2026_CEPW_175483_1
Bid No 25 of 16/09/2026
Open Tender
Civil Works - Roads
Percentage
60 days
JALANDHAR
Please refer Tender documents.
13 documents required · 13 mandatory
₹5,000
₹33,500
Yes
16 Sept 2026
16 Sept 2026
28 Sept 2026
16 Sept 2026
28 Sept 2026
16 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lift and combined lead up to 60 mtr. | 471.41 | Cum | 33.71 | ₹15,891.23 |
| 2 | Providing & Laying of Fine sand including Compaction, Loading & Unloading, carriage to site of work, spreading. Grating to required slope as per satisfaction of Engineer-in-Charge. | 294.63 | Cum | 777.28 | ₹2,29,010.01 |
| 3 | Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers) | 589.26 | Sqm | 6.32 | ₹3,724.12 |
| 4 | Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and
disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications | 966 | Mtr. | 95.23 | ₹91,992.18 |
| 5 | Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in
place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical
specifications | 88.39 | Cum | 1,590.92 | ₹1,40,621.42 |
| 6 | Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in
uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming
requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as
per technical specifications | 114.42 | Cum | 1,898.26 | ₹2,17,198.91 |
| 7 | Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in
uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming
requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as
per technical specifications | 114.42 | Cum | 1,898.22 | ₹2,17,194.33 |
| 8 | Credit of Excavated earth (As per AC Slip No. 8 Date 08/08/2024 & 03/09/2024 | 235.7 | Cum | 229.47 | ₹54,086.08 |
| 9 | Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per
technical clause 509 of MORT&H specifications | 1,525.55 | Sqm | 122.06 | ₹1,86,208.63 |
| 10 | Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the
prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications | 1,525.55 | Sqm | 38.84 | ₹59,252.36 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.03 MB
Technical_Conditions.pdf
Tender Documents • 0.83 MB
BOQ_357160.xls
BOQ • 0.28 MB
SBD.pdf
Tender Documents • 5.55 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .