Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC 599 LANE NO 13 RAM NAGAR ROORKEE HARIDWAR UK | L1 | Accepted-AOC Awarded being L1 | |
| 2 | L2₹18.0 L+₹5,760 (0.32%)Rejected-AOC 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹18.8 L+₹91,000 (5.08%)Rejected-AOC D 502 SHIVILOK COLONY RAIPUR ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹28.5 L+₹10.6 L (58.9%)Rejected-AOC 149 KHAJURI HARIDWAR UTTARAKHAND 247668 | HARIDWAR | UTTARAKHAND | 247668 | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹32.6 L+₹14.7 L (81.8%)Rejected-AOC VILL P O MIRAGPUR DISTT SAHARANPUR 247554 U P | SAHARANPUR | UTTAR PRADESH | 247554 | L5 | Rejected-AOC Being not L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
7 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Roorkee
GARRISON ENGINEER ROORKEE
PERIODICAL SERVICES TO CERTAIN MD ACCN, OTM ACCN, MES INSTALLATIONS AND SECURITY WALL AT
2023_MES_602396_1
8392/283/E8
Open Tender
Civil Works
Item Rate
180 days
SAHARANPUR
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (MES) Roorkee
₹80,000
Yes
21 Aug 2023
9 Jun 2023
10 Jul 2023
9 Jun 2023
7 Jul 2023
23 Jun 2023
Amount
M&L for preparation of old decorated surface of exterior wall by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint by using roller (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer , over a coat of 1mm thick wall care putty , of approved make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer in charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of paint for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for preparation of old decorated surface of exterior wall (water tank 50000 ltr capacity and work to be carriedout upto height of 30m) by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of acrylic emulsion paint for each building. (v). The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for preparation of old plastered surface of internal wall all as prescribed by manufacture of paint and applying two coats of acrylic distemper paint by using Roller (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty), a coat of exterior water based, over 1mm thick wall care putty primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.
Taking down cement plastering at any description on brick wall etc including raking out joints hacking for key scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.
M&L rendering 10 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying two coat of white wash complete all as specified and directed.
M&L Rendering 15 mm thick cement plaster on brick walls in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement complete all as specified and directed. Note :- Integral liquid water proofing compound will be measured and paid seperately.
Supply only Liquid water proofing compound ISI Marked complete all as specified and directed.
M&L Rendering 15 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surfaces of walls and apply two coat of cement base paint over a coat of alkali resistant wall primer, complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint by using Roller (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty), a coat of exterior water based, over 1mm thick wall care putty primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.
M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of 1mm thick wall putty using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction to the satisfaction of Engineer in Charge before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE
M&L for preparation of old plastered or unplastered surface of wall including cornices and pillasters etc and applying one coat of white wash on wall complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall/boundary wall including cornices and pillasters etc and apply one coat of colour wash on wall surfcace complete all as specified and directed.
M&L for preparation of old surface of ceiling plastered or unplastered including cornices and pillasters etc and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old ceiling surface including cornices and pillasters etc and applying one coat of oil bound distember complete all as specified and directed.
M&L for preparation of old surface of wall/boundary wall plastered including cornices and pillasters etc and applying one coat of cement base paint on wall complete all as specified and directed.
M&L preparation of old painted surface of wall and applying one coat of oil bound distember using roller complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed.
M & L for Obliterating old writing of any description, n exc 0.1 sqm with synthetic enamel paint to match with the existing work compelete all as directed.(Make :- asian/Berger)
M & L for Writing letters or figures (in Block, Roman, Italic or Indian) n exc 30 cm hight with synthetic enamel paint to match existing work complete all as directed.(Make :- asian/Berger/Neorolac)
G.H. INFRASTRUCTURE PRIVATE LIMITED
VINAYAK CONSTRUCTION COMPANY
M/s Himanshu Tyagi
sath sahib associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .