ADDITION/ALTERATION TO NEW OPS ROOM, CHANGING ROOM, TOILET, IMPROVEMENT TO CEILING AND PROVISION OF WALL PANELLING INSIDE FLIGHT OFFICES OF 121 HF INSIDE AIRPORT AREA AND CERTAIN MW AT KALINA AND DSC MESS AT SANTCZ AT AFS MUMBAI UNDER GE AF THANE

Amount

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quoins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land,complete all as specified and as directed by Engr-in-charge.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in Soft / loose soil ,complete all as specified and as directed by Engr-in-charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil ,complete all as specified and as directed by Engr-in-charge.

Excavation in post holes (or similar holes) in hard dense soil, each n exc 0.50 cum , getting out returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface ,complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) in , foundation for post, filling and mass concrete ,complete all as specified and as directed by Engr-in-Charge.

M&L for Hardcore of Broken stone or boulders gauge exc 63 mm but n exc. 100 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering ,complete all as specified and as directed by Engr-in-charge.

Returning , filling in, soil including, including spreading levelling, watering and well ramming in layers n exc 25cm ,complete all as specified and as directed by Engr-in-charge.

Removing excavated material exc 250m and n. exc.500m and depositing where directed ,complete all as specified and as directed by Engr-in-charge.

Removing demolished materials/debris to a distance exc 13.50 KM and n exc 15 KM and depositing outside MD land ,complete all as specified and as directed by Engr-in-charge.

M& L for Anti-Termite treatment for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area ,complete all as specified and as directed by Engr-in-charge.

M& L for Anti-Termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface ,complete all as specified and as directed by Engr-in-charge.

M& L for Anti-Termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall ,complete all as specified and as directed by Engr-in-charge.

M & L for PCC (1:4:8) type D2 ( using 40 mm graded stone aggregate) as in foundation, filling and mass concrete ,complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:3:6 type C2 ,100 mm thick in sub floor ,using 40mm stone aggregate in flooring ,complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M& L for Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 ,complete all as specified and as directed by Engr-in-charge.

Labour only for brick work by using old seviceable bricks obtained from demolition after cleaning and removing mortar etc built in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M & L for cutting out bricks, forming jambs ,toothing for and bondinng new into old work incl value of new materials entering old walls and jointing and pointing in cement mortar (1:4) ,complete all as specified and as directed by Engr-in-charge.

M&L for Cutting holes into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 not exceeding 150 Sq cm ,complete all as specified and as directed by Engr-in-charge.

S&F Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm ,complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc ,complete all as specified and as directed by Engr-in-charge.

Rendering 10 mm thick in CM 1:6 on Brick surfaces ,complete all as specified and as directed by Engr-in-charge.

M&L 3mm thick wall care putty on wall ,complete all as specified and as directed by Engr-in-charge.

M & L for preparation of new surfaces on walls and applying two coats of oil bound distemper over a coat of primer ,complete all as specified and as directed by Engr-in-charge.

Rendering 15 mm thick in CM 1:4 on stone or concrete surfaces mixed with water proofing compound @ 3% by weight of cement ,complete all as specified and as directed by Engr-in-charge. [Note:- WPC shall be measured and paid separately ]

Supply only integral water proofing compund ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M&L for complete removal of existing treatment on wall and appying 3mm thick wall care putty .Thereafter applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for washing,rubbing down and stopping of distempered of old painted surfaces of wall and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M & L for Reinforced cement concrete (design mix) in M-30 (using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span , complete all as specified and as directed by Engr-in charge.

M & L for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl sup-posts, overhang etc, also splays bet floor and beams etc. , complete all as specified and as directed by Engr-in charge.

M& L for TMT bars upto and including 8 mm dia in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia for stirrups , complete all as specified and as directed by Engr-in charge.

M& L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia , complete all as specified and as directed by Engr-in charge.

Demolition of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in any morter all as specified and removing demolished materials and debris outside MOD land , complete all as specified and as directed by Engr-in charge.

M&L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on floor over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes,complete all as specified and as directed by Engr-in charge.

M&L for Granite (of any type) tiles 20 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 10mm thick in CM 1:4 as backing coat to receive skirting / dado,complete all as specified and as directed by Engr-in charge.

M&L for Machine cut cudappah stone slab 20 to 25 mm thick over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing ,complete all as specified and as directed by Engr-in charge.

M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations ,complete all as specified and as directed by Engr-in charge.

M&L for Vitrified ceramic tiles double charge dark shade 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match.over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes ,complete all as specified and as directed by Engr-in charge.

M&L for Vitrified ceramic tiles double charge , dark shade 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes ,complete all as specified and as directed by Engr-in charge.

M&L for racking , cutting and waste on glazed tiles ,complete all as specified and as directed by Engr-in charge.

S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:6 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge.

M & L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms over 10mm thick in CM 1:6 as backing coat to marble including pointing in white cement (1:2) using marble dust with admixture of pigment to match the marble shade , complete all as specified and directed by Engr-in-charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillet , complete all as specified and directed by Engr-in-charge.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing as mentioned in SSR Part-I or as directed by Engr-in-charge at site.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as mentioned in SSR Part-I or as directed by Engr-in-charge at site.

M&L for Anodised aluminium snap grid frame work of size (605mm x 605mm ) for false ceiling , complete all as specified and as directed by Engr-in charge.

M&L for Hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mmx605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40x3 mm size 60 mm long and expansion hold fastners 12.50mm dia. 40mm long , complete all as specified and as directed by Engr-in charge.

S & F PVC insulation pannels 10mm thick with EPS stuck to 1mm printed PVC sheet used in lieu of plain PVC sheet placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing as mentioned in SSR Part-I or as directed by Engr-in-charge at site.

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering in any position including necessary steel double scaffolding complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.80mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in charge.

S&F 1 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley,eaves gutters half round with rounded edges, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 ,complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided , complete all as specified and as directed by Engr-in charge.

S& F mild steel Fe-410-W(Gde-E-250) quality-B, Joist, channel,angle,or tee sections, fixed independently,connecting plates,roof trusses , purlins etc,(cut to ordinary lengths i.e.within 20mm of the length indicated), intricate design , complete all as specified and as directed by Engr-in charge.

S & F Rolled mild steel in Steel work in tubular trusses including special shaped washer for truss , purlins etc complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 , complete all as specified and as directed by Engr-in charge.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B,etc , ornamental and instricate design, complete all as specified and as directed by Engr-in charge.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges; clamps; hold fasts; wall ties plain angle clets for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps ,plate washers and similar small articles conforming to Fe.290. Grade-E-165 , complete all as specified and as directed by Engr-in charge.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 , complete all as specified and as directed by Engr-in charge.

M & L for Mild steel screw bolts (machine made) 5 to 10mm dia of neck in mm with hexagonal or square heads at one end and screwed the others or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long , complete all as specified and as directed by Engr-in charge.

M & L for welding in repairs to roof truss,rafters , purlins,steel gates/ windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 9 mm but n exc 20 mm [height of roof truss,rafter / purlins 12m to 15 m] , complete all as specified and as directed by Engr-in charge.

M&L for preparartion of new surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer , complete all as specified and as directed by Engr-in charge.

M&L for preparartion of old surfaces of steel not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer , complete all as specified and as directed by Engr-in charge.

S & F Aluminium composite Panel Grade AL-45 for exterior uses having panel thickness / sheet thickness 4mm with any texture / colour ,intricate and ornamental design packing with adhesive including necessary steel double scaffolding (upto 12 m to 15 M Height) , complete all as specified and as directed by Engr-in charge.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws, all complete as per architectural drawings including necessary steel double scaffolding (upto 12 m to 15 M Height) complete all as specified and as directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.50 Sqm each in each pane , complete all as specified and as directed by Engr-in charge.

S & F 3 mm thick figured glass. ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.50 Sqm each in each pane , complete all as specified and as directed by Engr-in charge.

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work, complete all as specified and as directed by Engr-in charge.

S & F 12 mm thick toughened glass for doors, partition, area exceed 1.50 Sqm in each pane including fixed with standard Adhesive , Stainless steel glass connector, SS Tee and SS Hardware for fixing glass , complete all as specified and as directed by Engr-in charge.

M & L for glass brick 80 mm thick, size 200 mm X 200 mm X 80 mm , glossy finish, square shape with any pattern or design , transperant or colour for Partition wall, dividers, construct glass wall fixed with Standard Adhesive , complete all as specified and as directed by Engr-in charge.

S&F Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples , complete all as specified and as directed by Engr-in charge.

S&F 9 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , complete all as specified and as directed by Engr-in charge.

S&F 18mm to 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , complete all as specified and as directed by Engr-in charge.

S & F 18mm thick Factory made 100 % Solid rigid PVC ( Poly vinyl chloride) foam sheet prelam colour having density of 600 Kg/cum manufactured by an ISO 9001-2015 CERTIFIED COMPANY. Termite Proof, water proof and and flame retarder PVC sheet, Manufactured by single layer extrusion process. For both side laminated solid PVC foam sheet PVC film laminated should be pasted on PVC sheet with suitable adhesive and approved shade , complete all as specified and as directed by Engr-in charge.

S & F PVC fillets in lipping for door frame incl glue/ solution /( fevicol or equivalent ) pressed , well finished etc , complete all as specified and as directed by Engr-in charge.

S&F cupboard doors Magnetic catches No.2 ,complete all as specified and as directed by Engr-in charge.

M&L for Extra over rates for external teak wood lipping 6 mm thick fixed with nails ,complete all as specified and as directed by Engr-in charge.

M& L for (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secuared with nails or brads ,complete all as specified and as directed by Engr-in charge.

M&L for preparartion of new surfaces of wood exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer ,complete all as specified and as directed by Engr-in charge.

S & F Rim latch (125 mm size of latch) with two levers of brass body stone enamelled finish , with brass knob or lever handle and fixed ,complete all as specified and as directed by Engr-in charge.

S&F Mortice lock Brass, vertical type, size 100 mm , 4 levers ,complete all as specified and as directed by Engr-in charge.

S&F, in repair, aluminium anodised barrel towel bolts of extruded section of length 150 mm ,complete all as specified and as directed by Engr-in charge.

S&F, in repair, stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame ,complete all as specified and as directed by Engr-in charge.

S&F 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate ,complete all as specified and as directed by Engr-in charge.

S&F,in repair,aluminium extruded alloy handles fabricated type anodised of size 150 mm ,complete all as specified and as directed by Engr-in charge.

S&F stainless steel Auto Hinges / soft closing hinges having size 4 to 6 inches , full overlay hinge, half overlay hinge , silver colour, opening angle 110 Degree , shallo cup depth 13mm , shallow cup diameter 35mm for door shutter of cupboards , wardrobe etc ,complete all as specified and as directed by Engr-in charge.

S&F stainless steel high grade AISI 316 Stainless steel Cabinet handle Dia 8mm X 160mm (C/c) satin finish both end of handle are bent at 90 Degree and finished with zero tolerance ,complete all as specified and as directed by Engr-in charge.

S&F, in repair, hasp and staple safety type of size 100 mm of aluminium anodized ,complete all as specified and as directed by Engr-in charge.

Re-securing or easing and adjusting without taking down shutters of any description and size ,complete all as specified and as directed by Engr-in charge.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc 1.5 and n.exc 4 Sqm each complete all as specified and directed by Engr-in- Charge.

S&F,in repair, 20 mm dia aluminium anodised tubular curtains rod with powder coated ,complete all as specified and as directed by Engr-in charge.

S & F aluminium anodised brackets powder coated to match with rod for curtain rod of 20mm dia ,complete all as specified and as directed by Engr-in charge.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished ,complete all as specified and as directed by Engr-in charge.

S&F Door closer hydraulically regulated, designation No. 3,Aluminium extruded section body universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg ,complete all as specified and as directed by Engr-in charge.

S&F Double action floor spring Hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty ,complete all as specified and as directed by Engr-in charge.

S&F Floor door stopper 150mm long ,of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor ,complete all as specified and as directed by Engr-in charge.

S&F Hat pegs Brass, solid body, 125mm to 175 mm ,complete all as specified and as directed by Engr-in charge.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm length of bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy ,complete all as specified and as directed by Engr-in charge.

S&F Counter top wash hand basin of size 695 MM X 395 MM X 130 MM including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe of minimum 450mm lenghth etc ,complete all as specified and as directed by Engr-in charge.

Supply and fix in repairs 15 mm size wash hand basin mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, ,complete all as specified and as directed by Engr-in charge.

S&F in repairs 15 mm size bib tap cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe ,complete all as specified and as directed by Engr-in charge.

S&F 15 mm size Kitchen sink faucet with pull down sprayer in stainless steel Dratal pull out sprayer faucet kitchen flexi spout brushed steel (DT-1) ( item diamentions - 32cm X 8cm x 8cm ) ,complete all as specified and as directed by Engr-in charge.

S&F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and as directed by Engr-in charge.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and as directed by Engr-in charge.

S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S&F,in repair, 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe ,complete all as specified and as directed by Engr-in charge.

S&F,in repair, 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, complete all as specified and as directed by Engr-in charge.

S&F in repairs Pillar cock auto closing system Auto closing system with 65mm extension Body chrome finish, complete all as specified and as directed by Engr-in charge.

Taking up or down 15/20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing , complete all as specified and as directed by Engr-in charge.

Re-fixing of Old serviciable 15 mm bore galvanized iron tubing medium grade retrieved from relevent item of Sch A , after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors , complete all as specified and as directed by Engr-in charge.

S&F 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete.

Re-fixing of Old serviciable 20 mm bore galvanized iron tubing medium grade retrieved from relevent item of Sch A , after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors , complete all as specified and as directed by Engr-in charge.

S&F 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors , complete all as specified and as directed by Engr-in charge.

Supply and fix in repairs 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink , complete all as specified and as directed by Engr-in charge.

Supply and fix in repairs 40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink , complete all as specified and as directed by Engr-in charge.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink , complete all as specified and as directed by Engr-in charge.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink , complete all as specified and as directed by Engr-in charge.

Supply and fix in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook , complete all as specified and as directed by Engr-in charge.

S & F in repairs Teflon tape with adhesive sealant of length 10 m , width 1.5 cm , complete all as specified and as directed by Engr-in charge.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm , complete all as specified and as directed by Engr-in charge.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm , complete all as specified and as directed by Engr-in charge.

S&F in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting , complete all as specified and as directed by Engr-in charge.

S&F in repairs the internal fitting kit complete suitable for 10 to 15 ltr PVC low level flushing cistern , complete all as specified and as directed by Engr-in charge.

S&F 15mm bore two way bib tap chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union,complete all as specified and as directed by Engr-in charge.

S&F,in repair, vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe(Minimum lenght 450mm) and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces , complete all as specified and as directed by Engr-in charge.

S&F,in repair, plastic water closet seat cover, white or black colour closed pattern with flat bottom, complete all as specified and as directed by Engr-in charge.

S&F ,in repair, polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, complete all as specified and as directed by Engr-in charge.

S&F in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing , complete all as specified and as directed by Engr-in charge.

S&F in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories , complete all as specified and as directed by Engr-in charge.

S&F in repairs 6 mm thick corner glass shelf ( size 300 mm x 300 mm ) with aluminum / SS railing incl brackets for fixing etc ,complete all as specified and as directed by Engr-in charge.

S&F in repairs 6 mm thick rectangular glass shelf ( size 450mm x 150 mm ) with aluminum / SS railing incl brackets for fixing etc , complete all as specified and as directed by Engr-in charge.

S&F Vitreous china EWC wall mounted (white) of size 360x545x380 mm incl taking down old water closet and refixing with seat cover,low level flushing cistern 10 lit capacity incl flushing kit, brackets for fixing ,making good existing surface etc , complete all as specified and as directed by Engr-in charge. Make: Jaquar (FLS-WHT-5953PP SM) or euivalent as per make list.

S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe , complete all as specified and as directed by Engr-in charge.

S&F PVC 160 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall , complete all as specified and as directed by Engr-in charge.

S&F in repairs PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall , complete all as specified and as directed by Engr-in charge.

S&F PVC (SWR) bends 160 mm bore any radius , complete all as specified and as directed by Engr-in charge.

S & F in repairs PVC (SWR) bends 110mm bore any radius , complete all as specified and as directed by Engr-in charge.

S&F in repairs PVC 110mm bore (SWR) coupler , complete all as specified and as directed by Engr-in charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber rings joints,laid in trenches or in floors , complete all as specified and as directed by Engr-in charge.

S & F 75mm bore PVC (SWR) bends any radius , complete all as specified and as directed by Engr-in charge.

S & F 75mm bore PVC (SWR) 'P' trap , complete all as specified and as directed by Engr-in charge.

S & F 75mm bore PVC (SWR) Couplers,complete all as specified and as directed by Engr-in charge.

S&F grating doom 100mm dia of PTMT (Min wt 25 gms) , complete all as specified and as directed by Engr-in charge.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats.(Min wt 150gms) , complete all as specified and as directed by Engr-in charge.

S&F Towel ring of PTMT fixed with ans including Chromium plated brass screws and wooden / plastic cleats (min wt 90 gms) , complete all as specified and as directed by Engr-in charge.

S&F PVC connections 15mm size with PTMT nuts of length 900mm , complete all as specified and as directed by Engr-in charge.

S & F in repairs single piece floor mounted EWC S (toilet /closet) continental white , Size 690X680X370MM soft close seat cover European water closet S trap type making good existing surface etc complete all as specified and directed by Engr-In-Charge. Make & model No: CNS-WHT-8515300 SPP JAQUAR BC 7608 or Equivalent as mentioned in make list

S & F in repairs tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges, complete all as specified and as directed by Engr-in charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door / window/Ceosetory windows & other Frames / Chowkhat of size 45 X 70 mm comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibers ( wood powder /rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ Cum, Screw withdrawel strength of 2200 N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners shall be paid for separately) , complete all as specified and as directed by Engr-in charge. Note : For WPC solid door / window frames, minus 5mm tolerance in diamention i.e. depth and width of profile shall be acceptable. Variation in profile diamentions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F factory made single extruded WPC ( Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 ( Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk /wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg /cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N /mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retarder and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws,complete all as specified and as directed by Engr-in charge.

S & F in repairs Toilet paper holder of brass having size 13.5 x 12.6 x 5.8 cm or 14.5 x 8.0 x 14.5 cm, chromium plated fixed to walls with chromium plated (CP) brass screws , complete all as specified and as directed by Engr-in charge.

M&L for 50mm thick ( average thickness) polymer modified single component alkaline resistant fibre reinforced, cementitious patch repair mortar on conrete structure. Applying the mortar around the reinforcement and finishing to bring it in line with existing concrete surface including necessary scaffolding with preparation of concrete surfaces by removing loose concrete dust, dirt etc. Cleaning the surface properly and applying one liberal coat of epoxy bonding agent ( two component agent) by brush application to parent concrete complete all as per manufacturer instructions and directed by the Engr-in- Charge. Note: Cured mortar should exhibit compressive strength of 20 MPa after 1 day and atleast 45 MPa after 28 days, tensile strength atleast 2.5 MPa after 28 days and flexural strength atleast 7 MPa after 28 days.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces , complete all as specified and as directed by Engr-in charge.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces , complete all as specified and as directed by Engr-in charge. .

Taking down ceiling fan /EXHAUST FAN of any size or make and refixing the same all as specified and directed by Engr -in-Charge.

M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade Conduit not less then 20 mm width with modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified for the following:- Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling

One light point controlled by one, two way switch

One light point controlled by two 2-way switches, cable 1.5 sq.mm size

One ceiling /exhaust fan point controlled by one switch and regulator

One 3 pin 5 amp socket out point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board

One bell/buzzer point controlled by one bell push.

All as per Srl item No 158.00 above but for one socket outlet 15 Amp on independent board with 4 Sq mm cable and 2.5 Sq mm earth wire.

All as per Srl item No 158.00 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

S&F Modular switch 1 way 6 A, 1 module , complete all as specified and as directed by Engr-in charge.

S&F Modular switch 2 way 6 A, 1 module , complete all as specified and as directed by Engr-in charge.

S&F Modular switch 1 way 16 A, module , complete all as specified and as directed by Engr-in charge.

S&F Modular Bell push 6 A, 1 Module , complete all as specified and as directed by Engr-in charge.

S&F Socket, 6A-2/3 pin combined 2 module , complete all as specified and as directed by Engr-in charge.

S&F Socket, 6A/16A-2/3 pin combined 2 module , complete all as specified and as directed by Engr-in charge.

S&F White cover plate with frame, 1 module , complete all as specified and as directed by Engr-in charge.

S/F White cover plate with frame, 2 module , complete all as specified and as directed by Engr-in charge.

S&F White cover plate with frame, 3 module , complete all as specified and as directed by Engr-in charge.

S&F White cover plate with frame, 4 module , complete all as specified and as directed by Engr-in charge.

S&F White cover plate with frame, 6 module , complete all as specified and as directed by Engr-in charge.

S&F White cover plate with frame, 8 module , complete all as specified and as directed by Engr-in charge.

S&F Metal flush box 1/2 module , complete all as specified and as directed by Engr-in charge.

S&F Metal flush box 3 module , complete all as specified and as directed by Engr-in charge.

S&F Metal flush box 4 module , complete all as specified and as directed by Engr-in charge.

S&F Metal flush box 5 module , complete all as specified and as directed by Engr-in charge.

S&F Metal flush box 6 module , complete all as specified and as directed by Engr-in charge.

S&F bell, AC, 230 volts, single pole , complete all as specified and as directed by Engr-in charge.

S&F ceiling rose PVC / Polycarbonate insulated body two to three terminal , complete all as specified and as directed by Engr-in charge.

S&F Modular Fan step regulator 120 W-2 module , complete all as specified and as directed by Engr-in charge.

S &F Lamp holder insulated body with back plate including LED lamp 7 watt with angle holder , complete all as specified and as directed by Engr-in charge.

S&F in repairs single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts , complete all as specified and as directed by Engr-in charge.

S&F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat srink envioromentel friendly Energy efficient ready to use pack , 20 Watt , 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc. with 100lum/watt, CRI> 70, Surge protection 4 KVA , complete all as specified and as directed by Engr-in charge.

S&F LED Luminare 600mmx600mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with 100lum/watt, CRI> 70, Surge protection 4 KVA , complete all as specified and as directed by Engr-in charge. .

Supply and fixing LED Light fitting Mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete with 100lum/watt, CRI> 70, Surge protection 4 KVA , complete all as specified and as directed by Engr-in charge. .

M&L for sub main wiring with two single core 10 Sqmm FR PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire , complete all as specified and as directed by Engr-in charge. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length

M&L for sub main wiring with two single core 6 Sqmm FR PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 4.0 Sqmm copper conductor PVC insulated (green colour) as earth wire , complete all as specified and as directed by Engr-in charge. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length

M&L for sub main wiring with two single core 4 Sqmm FR PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 2.5 Sqmm copper conductor PVC insulated (green colour) as earth wire , complete all as specified and as directed by Engr-in charge. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length

Supply and fixing of DB double door SPN 12 Way 240 Volts,complete all as specified and as directed by Engr-in charge.

Supply and fixing of DB double door SPN 08 Way 240 Volts,complete all as specified and as directed by Engr-in charge.

Supply and fixing of MCB SPN 63 Amps, 10 KA, 240 Volts,complete all as specified and as directed by Engr-in charge.

Supply and fixing of MCB SPN 40 Amps, 10 KA, 240 Volts,complete all as specified and as directed by Engr-in charge.

Supply and fixing of MCB SP 10 to 32 Amps, 10KA ,240 Volts , complete all as specified and as directed by Engr-in charge.

Supply, install comissioning and testing of commercial Air curtain unit size 28"X78" for preventive dust and conditioned air losses, single phase 220V, 50 Hz made out of MS/CRCA sheet of minimum thickness 18 gauage finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS-CRC 18 gauge square perforated suction grills, aluminium alloy fans and single phase electric motor, Nozzles etc, complete with fittings and accessories so as to produce 1-1.5 m/sec air velocity at floor level for door opening , complete all as specified and as directed by Engr-in charge.

Supply ,install and testing hi wall split units inverter type with copper bound compressor and capillary tube , indoor & outdoor units complete with cordless remote control unit and with in built Heating & Cooling arrangment, Digital inverter twin rotary, in built air ioniser,Plasma filter for better indoor air quality, with star rating having minimum 5 star rating and EER 3.2 of capacity 1.5 TR, operating at 230 V 50 HZ ,complete all as specified and as directed by Engineer-in-charge.Note: (i) Power supply cable for AC installation upto 5 meter including plug top three pin suitable for existing socket/Metal clad deemed to be included in Quoted rate. (ii) For installation of AC at site if any stand/support or small modification (i.e Preparation of exising old surface or any other minor repair ) required before fixing of AC then it should be included in quoted rate. (iii) The water drain pipe upto 5 meter for AC including cutting and other allied for fixing should be included in quoted rate ,nothing extra shall be paid on this account.(iv) Indoor to outdoor unit connection required at site with insulated copper pipe upto 7.5 meter deemed to be included in Quoted Rate.

Supply and fix Electric storage water heater (Geyser) 25 Ltrs capacity, 230 volts, single phase, 50 Hz, of rated power 2000 Watt, rated water pressure 8 Mpa incl all accessories and taking down unservviceable geyser from existing place & deposited into AGE E/M (AF) Mumbai store yard and making good for disturbed surfaces .

Supply and fix exhaust fan 300 MM sweep, 230 volts, 50 hz, metallic grey colour with louvers , complete all as specified and as directed by Engr-in charge.

Supply and fix ceiling fan 1200 MM sweep, 230 volts, 50 Hz , complete all as specified and as directed by Engr-in charge.

M&L Earthing complete with copper plate electrode 60×60cm ×3.15mm size & copper strip 20 x 3 mm brazed with copper plate buried in ground not less than 1.5 Mtrs deep with PCC chamber complete all as specified and as directed means of bolts, nuts, check nuts and washers of brass check nuts and washers of brass including necessary earth work, PCC chamber , CI cover with frame, funnel, mesh, Earth lead protection pipe, 7.5 Meter Earth Lead etc all as shown in electrical plate No 3 in SSR Part-I and connected to earth test point/LT Panel/Transformer including testing on completion , complete all as specified and as directed by Engr-in charge.

Supply and fix water heater storage type , electric,capacity 25 litres, BEE 5 star , complete all as specified and as directed by Engr-in charge.

Supply and fix water heater storage type , electric,capacity 50 litres, BEE 5 star , complete all as specified and as directed by Engr-in charge.

S&F Single pole and neutral enclousre with a two pin and earth plug and socket complete with one single pole MCB 10 amp 240V , complete all as specified and as directed by Engr-in charge.

S&F Single pole and neutral enclousre with a two pin and earth plug and socket complete with one single pole MCB 20 amp 240V , complete all as specified and as directed by Engr-in charge.

M&L for sub main wiring with two single core 2.5 Sqmm FR PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 2.5 Sqmm copper conductor PVC insulated (green colour) as earth wire , complete all as specified and as directed by Engr-in charge. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length

S K ENTERPRISES