Renovation of old dispensary in SE Operation into existing R D lab shifted frim HQ

Amount

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m including cost of all leads, lifts, labour for applying as per standard specification.

Dismantling the RCC, PCC and brick masonry any met with during execution below ground level including labour, tools etc,. complete.

Reinforced Cement Concrete

Plain Cement Concrete

Brick masonry

Supplying and filling in foundation and basement with filling M-sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

PCC 1:4:8 concrete using 20mm HBG machine crushed metalincluding cost of all materials, lead, lift, labour and curing etc., complete. For Structural plinths without form work

Refilling with excavated earth by headload upto 100m including loading and unloading and transporting and filling in low level places of SS complex as directed by Engineer including all leads, lifts, labour, tools etc., complete

Transporting the balance excavated earth by headload upto 100m including loading and unloading and transporting and filling in low level places of SS complex as directed by Engineer including all leads, lifts, labour, tools etc., complete

Laying reinforced cement concrete M25 using 12MM to 20MM HBG metal and 400 kg of minimum cement content for various types of work including necessary, strutting, shuttering, formwork, lead, lift, labour etc., complete but excluding cost of reinforcement.Grade Beam, Below G.L.etc., complete(Excluding steel) Foundation and Basement

Grade beam

CAST-IN-SITU slab

Lintel

Brick work in CM 1:6 for Foundation &Basement using fly ash bricks of size 230mmX110mmX70mm including cost of all materials, labour, lead, lift, curing and transporting etc., complete.

Plastering with CM for inside and out side walls, Partition walls Ceiling,flooring etc. including cost of all materials, labour, lead, lift etc., complete.

Plastering with CM 1:5, 12mm thick inside and out side Brick wall surfaces

Plastering with CM 1:3, 12mm thick for ceiling & RCC surfaces

Supply, fabrication and placing in position of MS / RTS / TMT grills(Fe 415 Grade steel) for reinforced cement concrete works including cost of steel, binding wire, labour, lead, lift, etc., complete.

Supplying and fixing of cast in situ sink of size 0.9x0.9x0.6 for testing lab for washing the oil and acid bottle the sink should be Wall finish Dadooing with acid resistant tiles of approved make and shade to set in CM 1:2, 10mm thick including cost of tiles and all leads, lifts, labour etc., as per standard specification.

Supplying and fixing of cuddapah slab 20mm thick including cost of material and all leads, lifts, labour etc., as per standard specification.

Flooring with anti skid tiles or equivakent to set in cement mortar 1:3 for bath and F.O.L flooring including cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge tiles colour and shade to be got approved by the Executive Engineer before use.

Daddoing inside the wall with glazed tiles to a height of 1m over CM 1:3, 12mm thick and joint shell be finished with white cement including cost of cement, all materials, labour, lead, lift and curing etc., complete.

Flooring with Industrial tiles matt finish of approved quality (Johnson-Endura) and colour, scratch resistant to set in cement mortar 1:3 for flooring in lab including cost of industrial tiles, all leads, lifts labour for laying fixing and finishing neatly as per standard specification and as directed by the Engineer-in-charge ( Industrial tiles colour and shade to be got approved by the Executive Engineer before in use )

Inside Wall paint with best quality plastic emulsion of approved colour two Coats over a primer coat over cement plastered surface including cost of all materials , leads, lifts, labour , scaffolding etc., complete.

Painting the outside walls with two coats of best quality exterior emulsion of approved colour over one coat of weather proof primer including cost of all materials, scafolding, lead, lift etc complete.

Painting old steel work with two coats of enameled paint over a coat of red oxide [colour and brand should be got approved by Executive Engineer] including cost of all materials, lead, lifts, labour, etc, complete.

Replacing the damaged Rolling shutter The top shaft is well designed with top roller fitted with high tension springs with special quality of cast iron pulleysand ball bearing arrangements and painting with one coat red oxide metal primer to the clear opening, including cost of all materials, fabrication, transportation, and fixing in position Godrej 7 levers locks 2Nos, for each shutter and labour charges complete., as directed by the Engineer.

Supplying and fixing of CW door of size 1180x2100/915x2100mm single leaf flush door in Kongu wood outer frame size 100x75mm and the shutter frame size 100x40mm for top rails, 150x40mm for lock rails and 200x40mm for bottom rails and fixed with 18mm thick water proof plywood and 1mm thick lamination ov both sides and giving necessary beeding 20mm size alround the joints of plywood bothsides, fittings and furniture of best quality, 150mm Ano, Alu.hinges (HD) 3Nos, 1No-250mm Alu.Aldrop, 2Nos-250mm Alu. tower bolts, 1No- stopper, 2Nos- handles and 1No-Godrej 4lever Mirtice lock including cost of all materials wood wrought and put up, labour charges and painting with one coat wood primer etc, complete as per direction.

Supplying fabricating & fixing in position of anodized aluminum natural color matt finish glazed sliding window including ventilator head of size 2.10x1.50m in accordance with ISI 1868, 1962 for bottom gutter arrangements so as to drain the water entry and extruded aluminum section of bottom track of size 62 x37mm with gutter arrangements at 1.218 kg/m side and top track of size 62x31.5mm at 0.778kg/m for shutter plain top and bottom section of size 40 x 18mm at 0.38kg/m plain side vertical section of size 40 x 18mm at 0.493kg/m inter loading vertical section of size 40 x 18mm at 0.63kg/m ventilator box frame 63 x37 at 0.850kg/m switch lock,special rubber, L angle,aluminum clip 17.15x17.27 1.5mm thick 0.128kg/m screws & fixing 4mm thick frosted glass etc, complete & including cost of all materials,lead,lifts,labour for fabricating & fixing in position including drilling holes in RCC work and brickwork etc.,with power drill to the required extent and made to the original condition after fixing etc. The aluminium frame is to be anodized with matt finish under electrically. Control condition in accordance with 1868/ 1962.Specification for an average anodic film thickness not less than 5 microns and all the materials should be got approved from the EE before use.

Supplying and fixing of solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.

Supplying and fixing of water closet with ‘P’ or ‘S’ trap with double flapped seat and seat cover with brass hinges and 10lit capacity PVC low level flushing tank with all fittings including cost of all materials,all leads, lifts, labour for fixing etc, complete as per standard specification.

Indian Water Closet.

European water closet

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple including cost of all materials, labour lead,lift,T&P etc.as per instruction of engineer at site etc.

Supplying and fixing of White glazed 550mm x 400 mm wash basin (ISI quality of approved brand) with all accessories such as C.I. brackets, C.P waste coupling, rubber plug and chain and all connection of water inlet and waste water connection , CP Angle cock. nylon connection, brass nipples,C.P.pillar tap etc., including CP soap container, Towel rail and 5mm thick mirror best quality approved brand. Mirror should be framed in anodized aluminium frame 2"x16" of size complete as per standard specification and as directed by engineer.

Supplying, laying and jointing of PVC pipes of approved brand and ISI quality for waterline, sewerline, and rainwater downfall pipe etc., including cost of all materials and all PVC specials, fixing the pipes Conceiled/over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed and HDPE pipes for Borewell.

PVCPipe160mm dia.6Kg/Sqcm for Bore Well

PVC pipe160 mm dia. 6 kg / Sqcm Strainer

Pipe with Slotted Holes for Bore Well

PVC Pipe 110mm dia. 4kg/sqcm for sweage pipe

50 mm dia PVC pipe 10kg/sqcm

40 mm dia PVC pipe 10kg/sqcm

32 mm dia PVC pipe 10kg/sqcm

25mm dia PVC pipe 10kg/sqcm

Supplying and fixing inposition of 32 mm dia UPVC Ball valve best quality including cost of all special fixtures lead, lift,etc., complete.

Supplying and fixing of PVC nainey trap 75mm dia. for letting out the bath room water including cost of materials, all leads, lifts, labour for fixing in position etc., complete.

Supplying and fixing of 15mm high quality chromium plated brass screw down bib cock such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Conducting geophysical survery to assess the availability of sufficient ground water and to locate the place of borewell including cost of all materials, labour hire charges for tools and plants leads, lifts labour etc., complete.

Drilling Borewell in all kinds of soil of Bore of size 150 mm diameter by using rotatory drilling power driven/Hand driven equipments at top 6"dia and necessary bentonite solution to get a developed surface not less than 5 hours including cost of all materials , labour, hire charges for all T&P's including Mobalisation and Demobalisation,leads,repeated lifts for changing the drilling rods to the required depth including cost of all materials, leads, lifts, labour etc, complete.

Suppling and filling with Pebbels for annular spacing in between strainer pipe and earth surface including cost of all materials, leads, lifts, labour etc, complete.

Flushing the Bore well with power rotatory flushing equipments including Mobalisation and Demobalisation, ,including cost of all materials, leads, lifts, labour etc, complete.

Supplying and fixing of 2 HP Texmo/ Kirlosker/Suguna Jet pump with all accessories, suitable starter, main switch fusecut, earthing arrangements, board for fixing main switch/fuse cuts/starter, check/foot valve, cost of all materials, labour for erection at site, bolts, nuts required for erection, lead, lifts, labour etc.,complete (The pump and starter should be tested by Engineer on running condition) for drinking water sump.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead lifts etc., complete

Supplying and fixing of Manhole Cover SFRC with frame of size 0.600x0.600m, including cost of all materials leads, lifts, labour for fixing in position, etc., complete as per standard specification

Supplying & fixing of RCC Rings 300 mm dia including cost of all lead, lift, erection charges etc., complete. For Exhaust fan openings.

Replacing the existing damaged Thermocole shall be of good quality of size 0.60mx0.60m including cost of all materials, labour lead,lift,T&P etc.as per instruction of engineer at site.

Providing false ceiling by using 12.50mm thick perforated gypsum board in panels using 6mmGI rod suspender ,16 gauge aluminium "T" and "L" including all materials, labour, lead and lift etc., complete.

Replacing the existing damaged ACC Sheet shall be of good quality of Supplying and fixing of asbestos corrugated sheets 7mm thick including cost of all materials, labour lead,lift,T&P etc.as per instruction of engineer at site.

Supplying, fabricating and fixing in position of MS grills gates,M.Sangle etc., at various levels as per approved design of the Engineer, including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.

Supplying and fixing of GI Chain Link - 2" x 2" using 10 Gauge Galvanised Iron Wire (of all sizes) type confirming to ISI specification 278 / 1982 including cost of all materials, labour charges for laying, tensioning , cost of GI binding wire, hire charges for T&P, lead, lift etc., complete.

Supply of RCC precast well rings of dia 1.35m dia. 300mm height and 50mm thick for Sinking wells.for septic tank including cost of well rings, lead, lift, erection charges etc., complete.

Supplying and fixing Aluminum partition [1.95m height] partly glazed & partly paneled with 9mm thick both side prelaminated boards [ Novapan or equivanent] and 5mm thick Machine frosted glass (Modi, Saint Gobin or Equivalent) using aluminum box section 63x38.4x2mmx1.174kg/m for verticals @ 955mm c/c [approx] and horizontals[3Nos] as directed by Engineer at site including the cost of all materials, labour, lead, lift, T&P etc complete

Supplying, fabricating and fixing in position anodised aluminum door half glazed & half PLB using aluminum box section 45x45x2mm for top, middle and sides, 100x45x2mm for bottom , top half fixed with 5mm thick plain float glass [ Modi, Saint Gobin or equivalent] and bottom with 9mm thick both side prelaminated boards [ Novapan or equivanent], approved quality Mortice lock, aluminum handles at front and back , pivot at top and bottom, door stopper etc including the cost of all materials, labour, lead,lift, T&Petc complete.

Supplying and providing wiring for lights, fans,Duct lights etc., using with 2.5 sq.mm PVC insulated copper wire for phase and neutral and 1.5 sq.mm PVC insulated copper wire for looped earthing in 25mm rigid conduit .PVC accessories with Metal Box in flush with wall with 5A Modular Switch Legrand/Crabtree/MK with Suitable Base plate, Cover plate with continuous earth wire connection of 14 SWG TC wire for PVC light point / Tube light paint / Buzzer inclluding cost of all materials lead, lift, etc., complete. The switch box of normal size 12"x8"x3" should be used.

Supplying and providing wiring 5amp plug point using two runs of 2.5 sq.mm PVC insulated copper conductor along with 1.5 sq.mm copper wire for earthing and also including 5amps two in one socket controlled by 5amp flush type switch on suitable Switch Box and connections.

Supplying of switch board and wiring 5 runs of 4sq.mm PVC insulated copper wire (phase and nuetral) and also for earthing and connection with 15Amps switch and socket combined with 15 Amps plug and 4P 63A MCV with encloser size for Battery point. This includes cost of materials and labour charges.

Supplying and providing wiring to Motor Room Points from motor to starter switch boxes using 2 runs of 4 sq.mm PVC insulated copper wire along with neutral PVC casing/PVC pipe not less than 25mm width with 2mm wall thickness including cost of materials, labour charger, switch board of size 18"x12"x3" with 16 Amps doublepole main switch and providing sufficient pace of providing and connections

Supplying and providing wiring with 2 runs of 4 sq.mm PVC insulated copper wire alongwith 2.5 sq.mm PVC insulatd copper wire for earthing inside the PVC rigid conduit not less than 25mm width and 2mm thickness for running circuit main from DB to all Switch Boxes, motors and inverter. Neutral should not be looped.Neutral in back and earthing in green to be followed.

Supplying and fixing, testing & commissioning of Wall Mounted LED 18W LED 4' with necessary connections etc., of suitable for control room

supply and fixing of 1200mm(48'') sweeping AC ceiling fan with ISI Brand with all accessories and stepped electronic 300 watts regulator down rod in the existing clamp of 5ft additional rod from the existing Truss including cost of all materials lead,lift,etc.complete.

supply and fixing of Pedstal fan with ISI Brand with 1300 rpm with all accessories and including cost of all materials lead,lift,etc.complete.

Supplying and fixing of 4 feet 18 W single LED tube lights with patti of ISI make.The rate includes cost of all fittings, tube,internal wiring,labour, lead, lift, transport,etc.,

Supplying and fixing, testing & commissioning of 300mm (12") dia AC Exhaust fan including wall bracket and accessories of standard make fixed on the wall and connections.

Supplying and fixing, testing & commissioning of Bulk head fitting with guard and 10W LED Bulb for duct lighting with necessary connections etc.,

Supplying and fixing, testing & commissioning of 25W LED Entrance light fittings for 25W LED with necessary connection edge of suitable inclusive of labour with necessary connections etc.

GST For bidders within Tamil Nadu Note: Builders within Tamil Nadu shall enter values seperately for SGST and CGST and shall enter the value as "Zero" for IGST

GST for bidders out side Tamil Nadu Note: Bidders outside Tamil Nadu shall enter value only for IGST and shall enter the value as "Zero" for SGST and CGST

THIRUMURUGAN ENTERPRISES