Various Construction works at Kamalnath

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr. : All kinds of soil

Earth work in excavation by manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil PWD BSR 2022 CH-B 1/ Item 1.6

Random rubble dry stone Kharanja under floor. PWD BSR 2022 CH-B -11 / Item 11.26

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: PWD BSR 2022 CH-B6/ Item 6.1.2

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock PWD BSR 2022 CH-B 1/ Item 1.9.1

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2022 CH-B3/ Item 3.1.4

Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in : cement mortar 1:6 (1 cement : 6 coarse sand)

Add extra over item no. 5.1 for Brick work in super structure upto third storey using brick of class designation 75 in . cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work in partition in super structure upto third storey 7 cm thick ( bick on edge ) using brick of class designation 75 in . cement mortar 1:4 (1 cement : 4 coarse sand)

Random rubble dry stone Kharanja under floor.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2022 CH-B3/ Item 3.1.2

Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Wall ( any thickness ) including attached pilasters , buttresses, plinth and string Course . PWD BSR 2022 CH-B 4/ Item 4.10.1

Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Columns, pillars, posts and struts etc.

providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering . M 20 grade mix

Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (IS:1786) PWD BRS 2022 CH-B 4/ Item 4.13.3

Polished Blue Kota stone flooring skirthing laid over 20mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete . For area of each slab from 2001sqm to 5000 sqm 25 mm thick slab

P/ F M.S. sheet Single leaf door shutter in angle iron frame 35X35X5 mm suitabilly daigonally bracked with 25X3 mm flat iron above and below lock rail of size 50X5 mm beading extra including all fitting as per direction of engineer-in- charge but excluding cpst of chowkhats inculding twocoats of anti-corrosive red oxide primer paints.

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required.

Window side Hung ( openable ) PWD BSR 2022 CH-B -09/ Item 9.19.3

Ventilators top Hung ( openable ) PWD BRS 2022 CH-B -09/ Item 9.19.3

Supplying & fixing fixed wige gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance .

Providing and fixing Square bars or other flat welded to window, ventilatiors etc.Super Bar size 10 MM

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc complete fine finish : 12 mm thick

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).

Filling available excavated earth ( excluding rock) in trenches plinth side of foundation etc. in layer not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead upto 50 mts and with all lift.

Extra if square,rectangular hollow tubelar sections are used or grill made by flats only Vertical Hollow pipe Wt per metre Hollow pipe 49.50X49.50X4.5 mm

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of use ful material if available :

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2022 CH-B3/ Item 3.1.4

Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :

Wall lining butch work upto 10m height with Red/ Pink Sand stone 20 to 30 mm thick (machine cut edges) stone strips of minimum length 300 mm and required width including embedding every tenth layer and bottom most layer in masonry or concrte after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 Coarse sand) i/c ruled pointing in cement mortar 1 :2 ( 1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer in Charge . Exposed face machine cut

S&F white ashlar stone machine cut Kangura as per approved design 5 cm to 7 cm thick and top portion half round up to 10- 12 cm height. Both machine cut finished including excavation of earth work and fixing in cement sand mortar 1:6 as per direction of Engineer incharge complete in all respect size 35 cm wide 5/7 cm thick with all taxes.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size )

Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, copingbed plates, anchor blockes,sills, chhajjas, lintel, beams etc.

Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Columns, pillars, posts and struts etc.

providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering . M 20 grade mix

Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (IS:1786) PWD BRS 2022 CH-B 4/ Item 4.13.3

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). New work ( three or more coats )

Making Architect design and horticl work on pillers and wall complete as per requiment. Market Rate

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2022 CH-B3/ Item 3.1.4

Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in : cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work in partition in super structure upto third storey 7 cm thick ( bick on edge ) using brick of class designation 75 in . cement mortar 1:4 (1 cement : 4 coarse sand)

Random rubble dry stone Kharanja under floor.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2022 CH-B3/ Item 3.1.2

Suspended floors, roofs, landings, staircase, balconies, girders, cantilevers, bands, copingbed plates, anchor blockes,sills, chhajjas, lintel, beams etc.

Providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering . M 20 grade mix

Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (IS:1786) PWD BSR 2022 CH-B 4/ Item 4.13.3

Providing and fixing 1st quality standard Marble printed/ Granite Shade or Light/dark shad glazed tiles confirming to IS : 13753 & IS :15622 of size 300mm x 600mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge

30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC „C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC

Supplying & fixing fixed wige gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance .

Providing and fixing Square bars or other flat welded to window, ventilatiors etc.

Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc complete fine finish : 12 mm thick

Finishing with neat cement ( punning )

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).

Painting with emamel paint of approved brand and manufacture and to give an even shade . Two or more coats on New work

Sanitary Amount 10% Of Civil Works

Electrical Amount 05% Of Civil Works

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock PWD BSR 2022 CH-B 1/ Item 1.9.1

Random rubble dry stone Kharanja under floor.

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Raised and cut pointing. PWD BSR 2022 CH-B12/ Item 12.31.2

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of Centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2022 CH-B 4 / Item 3.1.4

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: dry Masonry

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock PWD BSR 2022 CH-B 1/ Item 1.9.1

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size )

Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in : cement mortar 1:6 (1 cement : 6 coarse sand)

Add extra over item no. 5.1 for Brick work in super structure upto third storey using brick of class designation 75 in . cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work in partition in super structure upto third storey 7 cm thick ( bick on edge ) using brick of class designation 75 in . cement mortar 1:4 (1 cement : 4 coarse sand)

Random rubble dry stone Kharanja under floor.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level:

Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Wall ( any thickness ) including attached pilasters , buttresses, plinth and string Course .

Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc.

Columns, pillars, posts and struts etc.

providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering . M 20 grade mix

Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (IS:1786) PWD BRS 2022 CH-B 4/ Item 4.13.3

Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade.

Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :

Polished Blue Kota stone flooring skirthing laid over 20mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete . For area of each slab from 2001sqm to 5000 sqm

P/ F M.S. sheet Single leaf door shutter in angle iron frame 35X35X5 mm suitabilly daigonally bracked with 25X3 mm flat iron above and below lock rail of size 50X5 mm beading extra including all fitting as per direction of engineer-in- charge but excluding cpst of chowkhats inculding twocoats of anti-corrosive red oxide primer paints.

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required. Window side Hung ( openable ) PWD BSR 2022 CH-B -09/ Item 9.19.3

Ventilators top Hung

Supplying & fixing fixed wige gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance .

Providing and fixing Square bars or other flat welded to window, ventilatiors etc.

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer

Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc complete fine finish : 12 mm thick

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including allscaffolding: Two or more coats on new work including prepration of base with primer Putty lippy complete in all respect. PWD BSR 2022 CH-B -12 / Item 12.40.1

Painting with emamel paint of approved brand and manufacture and to give an even shade . Two or more coats on New work PWD BRS 2022 CH-B 12/ Item 12.46.1

Filling available excavated earth ( excluding rock) in trenches plinth side of foundation etc. in layer not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead upto 50 mts and with all lift.

Electrical & Saintary (7+5=12%)

Please Enable Macros to View BoQ information