Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC AO 144 GF SECTOR 48 C MOHALI | FATEHGARH SAHIB | PUNJAB | 140405 | ₹15.7 L Quoted ₹20.4 L | L1 | Accepted-AOC Quoted Lowest rate |
| 2 | L2₹21.2 L+₹80,198.29 (3.94%)Rejected-AOC | ₹21.2 L+₹80,198.29 (3.94%) | L2 | Rejected-AOC Quoted Higher rate |
| 3 | L3₹22.3 L+₹1.9 L (9.52%)Rejected-AOC 1625 B 1 OLD GADDA KHANNA ARYA SAMAJ PATIALA | PATIALA | PATIALA | PUNJAB | ₹22.3 L+₹1.9 L (9.52%) | L3 | Rejected-AOC Quoted Higher rate |
Tender Value
₹25.0 L
EMD Value
₹49,968
Closing Date
8 May 2026, 3:00 pmClosed
Executive Engineer Provincial Division Chandigarh
Room no 315-16 17 bays building sector 17 chandigarh
Special Repair for Civil Miscellaneous Works at Kothi No. 904 Sector 39-A Chandigarh
2026_CEPW_167467_1
08 Dated 30.04.2026
Open Tender
Civil Works - Buildings
Percentage
60 days
Sector 39 Chandigarh
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹49,968
Yes
29 May 2026
1 May 2026
8 May 2026
1 May 2026
8 May 2026
1 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Tile 600 x 1200 mm (DSR 2023 11.41A.1.3) | 194.37 | Sqm | 1,577.15 | ₹3,06,550.65 |
| 2 | Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer (CSR 14.101) | 11.76 | Sqm | 2,151.25 | ₹25,298.7 |
| 3 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/ Semi Matt /Glosy/ Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR 14.127) | 31.59 | Sqm | 837.53 | ₹26,457.57 |
| 4 | Providing and applying Anti Termite Treatment using post constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 3 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturers specifications by drilling holes in the floor slab & along skirting 300 mm apart & 12 mm dia, drilling holes along all possible entry points such as junctions of floor and walls, door frames, sewage lines, entry points , etc. & injecting them with the chemical solution. (CSR 14.132) | 30 | Ltr | 1,175.71 | ₹35,271.3 |
| 5 | Wire gauge Hollock wood door shutter without springs housed in chowkhat (A) 35 mm thick (CSR 17.11 (ii) A) | 13.66 | Sqm | 2,111.21 | ₹28,839.13 |
| 6 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). (CSR 17.22 (iv) | 5 | Each | 1,826.77 | ₹9,133.85 |
| 7 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) (CSR 17.43 c) | 8 | Each | 1,380.08 | ₹11,040.64 |
| 8 | Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.69) | 32 | Each | 90.6 | ₹2,899.2 |
| 9 | Providing & fixing 12" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.71) | 64 | Each | 293.3 | ₹18,771.2 |
| 10 | Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge (ii) 4mm thick ACP Sheet (CSR 17.97 (ii) | 2.5 | Sqm | 2,496.8 | ₹6,242 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.57 MB
sbd904.pdf
Tender Documents • 5.61 MB
BOQ_340408.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .