GE 861 EWS-50/2024-25

Amount

Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ Cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet .50 mm lthick of any colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall, Ridge and eaves board, fixed with self tapping screws complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 15 mm thick 2nd class softwood boarding planed one side with butt joint with nails in any situation complete all as specified and directed.

M&L 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work , fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed.

Dismantling timber scantlings framed work under 40 sq.cm in section, in any position complete all as specified and directed.

S&F 2nd class soft wood (Kail) in scantling clean sawn framed work and fixed complete all as specified and directed

Dismantling of unframed timber scantling under 40 Sqcm, fixed in any position in fillet rails, posts rafters purlin etc complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 3 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down wooden frame exceeding 1.5 Sqm but not exceeding 4.00 sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down wooden frame not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification, drawing complete all as specified and directed.

S&F Second class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Mild steel flat iron 25x6mm as in hold fasts including all necessary cutting etc complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed block for fixing of hold fasts etc complete all as specified and directed.

S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S&f 30 mm thick glazed and skeleton window shutters, open rebated divided into squares, with plain, chamferred or rounded, mitred and rebated sash bars, glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkhats complete all as specified and directed.

M&L for mild steel framed work such as grills etc with ends of bars shouldered or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F 2nd hard wood in small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu.cm each complete all as specified and directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F 125mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F 125mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.

S&F 100mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.

S&F Mild steel sliding door bolts 300mm long, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed complete all as specified and directed.

M&L for painting on new wooden based surfaces of any description not other wise described over 10cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint to match the existing surfaces complete all as specified and directed.

M & L two coats synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces incl preparation of new steel surfaces over 10 cm width or girth complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description not otherwise described, over 10cm in width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises omplete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick blow or above ground level complete all as specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 Type C-2 (40 mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed

M&L 100 mm thick PCC 1:3:6 Type C-2 (40 mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed

M&L 100 mm thick PCC 1:4:8 Type D-2 (40 mm graded aggregate) as sub-base complete all as specified and directed

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Plain Cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in coping complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed bed of CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick rendering in cement mortar 1:4 and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) complete all as specified and directed.

M&L for non skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non Skid joint free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm on vertical surfaces such as skirting, dado, steps etc over and including 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x350x7 mm thick set over and including 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F 1.25mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type mechanism complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F Ball bearing for rolling shutters complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floors,15 mm bore complete all as specified and directed.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 20 mm bore complete all as specified and directed.

S&F in repairs 15mm Bib Taps with wall flange of chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and directed.

S&F in repairs stop valves/angle valves for 15 mm bore of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Vitreous China wash down water colset (Squat pattern) white complete as fixed in repairs excluding flushing cistern and flush pipe "Orissa" pattern size 580x440 with integral footrest inlet connection to trap anti syphonage etc complete incl joint between flushing pipe and socket of WC complete all as specified and directed.

S&F Vitreous china wash down water closet (Pedestal pattern), white (EWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cistern complete all as specified and directed.

S&F in repairs PVC Low level flushing cistern 10 Ltr capacity including all fitting such as flush pipe brackets complete all as specified and directed.

S&F in repairs 15 mm bore fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm dia brass waste fittings, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe , flush pipe and waste pipe of suitable size complete all as specified and directed.

S&F in repairs PVC connection of 15 mm bore and 450 mm long with brass check nut and union etc complete complete all as specified and directed.

S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges. Make : Prayag

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket gaurd and railing 60 cm long complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed

M&L rendering 10 mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces including finishing the surface even and smooth without usig extra cement complete all as specified and directed.

M&L rendering 15 mm thick mixed with liquid water proofing compound on external surfaces of brick work or concrete surfaces in cement mortar (1:4) including finishing the surface even and smooth without using extra cement complete all as specified and directed. Note : (WPC will be measured and paid separately)

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper emulsion over 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distamper emulsion over 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed

M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil

M&L hard core of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC type D2, 1:4:8 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brickwork with burnt sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar (1:6) complete all as specified and directed.

M&L for reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4 using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete (Nominal Mix) using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams for rough finished surfaces etc. complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F mild steel TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed.

All as per item No 97 herein before 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for providing RCC precast cement concrete type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified nd directed. Note : Reinforcement shall be measured and paid separately.

S&F 20mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Dismantling 500 Ltr capacity water tanks and removing to store or credit from contractor complete all as specified and directed.

Dismantling 2000 Ltr capacity water tanks and removing to store or credit from contractor complete all as specified and directed.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) three layered hoisted and fixed in position complete all as specified and directed.

S&F 2000 Ltr capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) three layered hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed three layered hoisted and fixed in position complete all as specified and directed.

M&L for 75mm outlet dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors three layered hoisted and fixed in position complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction (Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction (Single T) equal or unequal 75 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 150 mm bore complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB, DB, MCB's, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse such as regulators, light fitting, MCBs complete all as specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per srl item No-116 here in above but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

All as per srl item No-116 here in above but for One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size complete all as specified and directed.

All as per srl item No-116 here in above but for One 3 pin socket outlet, 15 Amps, independent, with cables 4 Sqmm size complete all as specified and directed.

S&F switch piano flush type, 05/6 Amps single pole, one way 240 volts complete all as specified & directed.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amp flush type universal 240 volts complete all as specified and directed.

Supply and fixing in replacement fan step regulator, 120 watt-2 module type electronic fan regulator, duly ISI marked with and including connector complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fixing LED lamp 9 W complete all as specified and directed.

S&F round shape 12 W 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with with drivers , holder, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F decorative ultra slim linear LED 20 W4, long lighting fixture with extruded aluminium heat sink environment friendly energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB connector block etc including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified and directed.

S&F LED bldg security light fitting 35 watt 230V AC outdoor type with high pressure die cast alunimium housing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F sheet metal enclosure Vertical type , Triple pole and neutral, AC , 415 volts, 4 way with 200 Amps rated copper bus bar IP_43 protection with metal double door and flush to wall including all cutting on wall abnd making good including two coats of white/colour washing/distempering etc to match the exsisting disturbed surfaces complete all as specified and directed.

S&F sheet metal enclousre Vertical type , Triple pole and neutral, AC , 240 volts, 8 way with 200 Amps rated copper bus bar IP-43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F MCCB 4 pole 63 Amps, AC 415V, 25kA complete all as specified and directed.

S&F MCB, SP, AC, 240 volts 'B' series capacity 06 to 32 Amp 10kA and making connections complete all as specified and directed.

Supply and fixing MCB SPN (Single pole neutral ) AC 240 volts B series capacity 32 Amps 10kA and making connections complete all as specified and directed.

S&F in replacement material and labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6m thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level steel earth plate connected with GI wire 4mm dia by means of lug bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electric plate No-03 of SSR Part-I connecting to main switch board /Main DB's including excavation earth work salt and charcoal dust mixed and packed 150mm thick ground GI earth plate , GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh concrete pit RCC cover in PCC 1:2:4 type B-1 duly reinforced with MS bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit /chamber in PCC 1:3:6 type C-1 , angle iron 40 x40 x5mm frame for pit cover including testing on completion complete all as specified and directed.

S&F in replacement exhaust fan 300 mm sweep PVC body with louvers 240 volts AC single phase 50Hz ISI marked including necessary work in wall/sheet incluidng connection cable nut bolt and other fixing material complete all as specified and directed.

S&F in replacement ceiling fans complete with blades down rods electronic regulator and accessories 230C, 1200mm sweep Min air delivery 210 CFM with service value 6.00 BEE Five star rated with bushes direct current motor (BLADE) complete all as specified and directed.

S&F in replacement wall fan 450mm sweep high speed 230 volts single phase with jerk free oscillation smooth running three blades pull cords including fixing arrangement complete all as specified and directed.

S&F in replacement electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litres BEE-5 star rated complete all accessories such as safety valve thermostat, NRV connection piece etc. complete all as specified and directed.

S&F and laying or passing through pipe 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core nominal cross section in service connections complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated FRLS cable with copper conductor unsheathed cable of size 6sqmm drawn through and including PVC conduit including 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC casing capping 25mm dia complete all as specified and directed. (Note:Two run of single core PVC insulated cable with copper conductor unsheathed cable of size 6.0 sqmm and one run of 6.0 sqmm PVC insulated copper conductor single core one run of PVC casing capping shall be measured as single run)

BHAT CONSTRUCTIONS AND BUILFERS (BID ID -3135084)

JANDOO AND CO (BID ID -3116857)