Design, Fabrication with running and operation for 365 days of one no Automatic wheel washing system with pic and different logic operation as per the vechile analysis and minimum utilization of water for heavy vechiles at exit point at AAODCM

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Supplying and filling in plinth with sand under floors, Including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering 3 and shuttering - All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana /Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to ImprWove durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.All works upto plinth level 5.33A.1.1 Concrete of M25 grade with minimum cement content of 330 kg/cum

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in Cum Cement mortar 1:4 (1 cement: 4 coarse sand)

12 mm cement plaster of mix:1:6 (1 cement: 6 fine sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in 7 position and binding all complete upto plinth level-Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. Exdermal work: 50 mm dia nominal bore

Providing and foxing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & 9 fittings with one step CPVC solvent cement, trenching, refiling & testing of joints complete as per direction of Engineer in Charge. External work:25 mm nominal dia Pipes

Supplying of wheel washing system unit consisting of the followings: 1. Wash pad 2 nos., 6.00x1.2 mtr 2. Side spray pannels, 6.00(L)x 1.5(W) mir- plate 2mm thick with 25x25x5 Angle support- 1 each side of LH and RH-2No. (3). Wash water booster pump 5.5 kw/1800LPM-1 Sets. 4.Automatic vechile entry sensing. 5. Side railing 6.Control Panel. 7. All necessary Control cable 300 Mtr 3.5 core 10 sq mm cu for pump and control panel

Training and trail run with running and operation for 365 days

Total impact of GST for the purpose of CTC