COMPREHENSIVE REPAIRS TO VARIOUS B/R RELATED ITEMS TO OR MD ACCN IN WING III UNDER GE NASIK ROAD.

Amount

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) n.exc 1.50 sqm each removing from the site complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.

Taking down shutter of any description exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.

Taking down shutters of any description n.exc 1 sqm from chowkhat and removing to or from store as required complete all as specified.

Taking down chowkhats or frame n.exc 1.50 sqm each removing from the site complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 sqm but n. exc 4 sqm each removing from site complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L Brick work with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6.

Dismantling of steel window/ventilators any description and any size complete all as specified and directed.

S&F for powder coated aluminium (minimum 50 micron powder coated) door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed.

S&F for powder coated aluminium (minimum 50 micron powder coated) shutter, aluminium section of size vertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws etc; floor hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directed.

S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators and glazed partion frame of any size with one or more rebates including joining cleat,beading and connected accessories as required for fixing etc. complete all as specified. Note:(a) During fixing of frames, surface shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

S&F aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified. Note:work is to be executed for high rise bldgs.

S&F 3.0 mm thick sheet glass, ordinary quality and glazing with silicon gel in square n exc 0.5sqm in each pane. Note:work is to be executed at any height and situation.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. Note : work is to be executed at any height and situation.

S&F II nd class hard wood plain,solid,straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

S&F factory made of 2nd class hard wood 35mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as spfd in SSR Part-1, section 8, clause 8.24(a) complete allas specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides particle board core including two coat of synthetic enamal paint over one coat of pink primer all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,suppling & fixing in the frame at site as per specification & drawing.

S&F mild steel flat iron for hold fasts, wall ties, hooks for hanging fans , plain angle, clamps for pipe and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C-1(using 20mm graded stone agg) as in bed blocks for grouting hold fasts, coping or similar work including necessary form work complete all as specified and directed.

S&F 75mm butt hinges, medium weight, cold rolled mild steel.

S&F 100mm butt hinges, medium weight, cold rolled mild steel.

S&F aluminum anodised barrel tower bolts extruded section of size 150mm long (ISI Marked) in repairs complete all as specified and directed .

S&F 150mm long extruded aluminum alloy (fabricated type) handles anodised ISI marked complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F for door stoper of brass 140mm body and tounge complete all as specified and directed.

M&L preparing surfaces of wood an wood based surfaces of any description not otherwise described over 10cm width or girth and applying of two coats synthetic enamelled paint over a coat of pink primer complete all as specified and directed.

S&F in repair 25mm dia medium weight, stainless steel as in drapery rod complete all as specified and directed.

S&F stainless steel brackets colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and direcdted.

S&F stainless steel knobs colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and direcdted.

Taking up or down steel tubing and connections 15mm bore including bib taps, stop cock etc. Note:work is to be done in multistorey bldgs(int and ext plumbing).

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.) Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

Taking up or down steel tubing and connections 20mm bore. Note:work is to be done in multistorey bldgs(int and ext plumbing).

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.) Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. Note: GI tubing shall be concealed wherever directed by Engr-in-charge. Contractors quotated rates deems to be inclusive of the said provision.

S&F in repair angle cock, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes as for unions and fixed in repairs all as specified and directed of size 15mm bore.

S&F in repairs bib taps cast copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm dia.

S&F in repairs bib tap 15mm bore chromium plated fancy type long body with crutch or butterfly handle fixed to iron pipes complete all as secified and directed.

S&F in repairs bib tap 15mm bore chromium plated fancy type swan neck with crutch or butterfly handle fixed to iron pipes complete all as specified and directed.

S&F in repairs chromium plated cast copper alloy pillar tap with capston heads fancy type fixed to iron pipes 15mm dia.

S&F Brass CP wall mixer for mixing hot &cold water scrwed down for iron pipe and 15mm bore fixed in repair.

S&F in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia suitable for low level flushing cistern complete all as specified and directed by Engr-in-Charge.

S&F in repirs coloured PVC valve less, syphonic action flushing cistern, low level, 10 ltr capacity with inlet, ball valve, float, chain and pull and brackets complete all as specified and directed.

S&F in repairs vitreous china squatting patern "Orisa pattern" size 580mmx440mm with trap white with intergral footrest complete.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F in repirs vitreous china wash basin Flat Bar 550x400mm excluding taps, chain and plug and proceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall completed all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers including bedding in cement mortar on to dwarf walls, or including fixing cantilever bracket and connecting union to waste pipe complete fittings over all size 495mmx420mm xbowl size 410mmx330mmx160mm.

S&F in repairs Chromium plated shower roses 65mm size with or without swivel joints, any size, including fixing to steel pipe complete all as specified and directed by Engr-in-Charge.

S&F ready made PVC conection 15mm bore 450mm long with end brass nuts, screws and PVC washer complete all as specified and directed.

S&F in repair waste fittings 40mm brass chromium plated for glazes ware sinks, basins etc with long screwes shanks and fly nuts flange end bedded in red lead cement and other end fixed in sink complete all as specified and directed by Engr-in-Charge.

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet 75mm.

S&F in repairs brass chromium plated tublar towel rail 'D' shape 20mm dia 600mm long.

S&F in repair chromium plated grating of size up to 100mm.

Supply and fixing in repairs 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity.

Supply and fixing in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity.

M&L for special treatment to sunken portion with 10mm thick plaster in cm 1:4 by using Dkitachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @ 2.5 Kg/Sqm. The paste like consistancy like is made by using 2.5Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooding for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI pipe, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water.including demolition of cement concrete in sunken slab and filling of mass concrete 1:5:10 all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out of MOD land and rubbish off the premises. Note:work is to be executed at any height and situation.

M&L for rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall.

M&L for glazed cermic tiles coloured size 300x200/300x450x6 to7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.

M&L for glazed cermic tiles coloured size 300x350/300x450x6 to7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6 complete all as specified and directed.

M&L for Non skid ceramic tiles coloured 7 to 8mm thick (square/rectangular ) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.

M&L for 8 mm to 10mm thick double charge vitrified ceramic tiles as in flooring, skirting or in any position and any shape. Area of each tiles not exc 0.36 sqm set & jointed in neat cement slurry and pointed in white or coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.

Demolition of stone slabs & tiles of any description or thickness in floors, aprons etc laid, bedded & pointed in any mortar all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level).

M&L for 75mm thick PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed.

M&L for rough shahabad stone 25mm to 30mm thick in flooring /plinth set and jointed in neat cement slurry over and including 15mm thick screed bed or beddingin CM 1:6 pointed in neat cement slurry in floors.

Chequered cement concrete tiles with grey cement and pigment 30cmx30cmx25mm thick, with rubber moulded glassy finished surface, laid in floors over and including 15mm thick screed bed or beddingin CM 1:6 pointed in neat cement slurry in floors.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;over and including provision of PCC 1:2:4 using 20 mm graded aggregate for edging/sides of footpath/paver as per standard engineering practice and as per direction of engr-in-charge.

Moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete.

M&L for broken stone hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled / rammed to a true surfaces complete.

S&F ready made 7 feet pully operated cloth drying stand, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia of polyster braided undyed including all fixtures and fastenings etc complete all as specified and directed.

Disconnecting existing tanks, exc 250 & n exc 500 setting aside (or lowering if required) cleaning and removing all scale and dirt etc, pipes etc and hoisting if required reconnrecting and re-fixing in position.

Disconnecting existing tanks, exc 500 & n exc 1000 setting aside (or lowering if required) cleaning and removing all scale and dirt etc, pipes etc and hoisting if required reconnrecting and re-fixing in position.

Taking down carefully existing bituminous membrane/tarfelt treatment any description and cleaning and making good damaged surface of roof ,parapet,facia etc in cement mortar 1:3/PCC 1:2:4 as directed by engr-in-charge where ever require.quotated rate shall be deem to be inclusive of complete removal of swollen plaster and concrete wherever directed by engr-in-charge and removing rubbish out of defence land.

Demolition of concrete (unreinforced) of any description and in any position not otherwise secifically provided for.

Providing cement concrete type B0 1:2:4(12.5mm graded aggregate) in roof kerbs or mud stops,ridge, padding,rounded or chamfered on edges.

M&L for rendering 15mm thick(minimum) in CM 1:4 with intergral waterproofing compound (200 ml per bag of cement used) on roof surfaces,parapets,facias etc . Note: waterproofing compound shall be measured and paid separately.

Supplying only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for applying evenly a coat of hot blown bitumen grade 85/25 over roof,facia,parapet surfaces at the rate 1.20kg per sqm for fixing app membrane etc including cleaning surfaces. Note:make same as for app membrane.

M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (b) APP membrance,Primer and bitumastic aluminium paint and bitumen shall be of same brand. (c) For vertical surfaces of parapet,wall etc app membrane shall be tucked into groove and sealed with silicon sealant(full width/depth of groove) i.e. "Dowsil 789 weatherproof silicon sealant" using gun. (d) Bitumen and aluminium paint shall be paid separately.

M&L for applying two coats of solar reflective bitumastic aluminium paint at the rate 0.15 kg per sqm per two coats over exposed app membrance surfaces(old/new) including cleaning of surfaces to the entire satisfaction of ground executives.

Excavation in post holes (or similar holes) each in not exc 0.5 cum getting out and removing surplus soil to a distance in exc 50 mm and making good surface in soft/loose soil complete all as specified and as directed.

Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed by Engr-in-Charge.

S&F for steel work as in tabular trusses/supproting pipes etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment

Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed.

S & F Prepainted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed. Gap between wall face and sheet if any shall be sealed using CM 1:3 with WPC.quoted rate deems to be inclusive of the same.

S & F Prepainted Galvalume aluminium zinc coating GI based Plain sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/cladding to wall,fixed with self tapping screw complete all as specified and as directed. Note:work is to be executed at any height and situation.

Taking down AC rain water pipes(any size or pattern) including all fittings,head shoes,bends,swan neck etc.

S & F PVC (SWR) pipes110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls including pvc clamps and stays.

S & F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces.

M&L for MS work conforing to Fe-290-0 Grade E-165 for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes complete and all as specified and directed.

M&L for mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long.

Dismantling chain link fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.

supply and fixing chain link fencing using 4mm dia GI wire 50x50mm mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F mild steel round bars10mm dia and over, cut to length, bent to shape required, including fixing chanlink fencing etc

M&L for Preparing new untreated steel or iron surfaces over 10cm width or girth and and two coats of synthetic enamel paint over and including a coat of red oxide. Note:work is to be executed at any height and situation.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 33655.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Vinod Enterprises (BID ID -3342701)

Alpha Construction (BID ID -3334927)

SVT ENGINEERS AND CONTRACTOR. (BID ID -3334551)

M/S K. K. Construction (BID ID -3335301)

Vishal Constructions (BID ID -3335170)

Srujan Associates (BID ID -3332953)

M/S R.K.S. CONSTRUCTION (BID ID -3342601)

UNITED ENTERPRISES (BID ID -3343406)