CONSTRUCTION OF 23 NOS QUARTERS ALONGWITH GUEST HOUSE AT PORT BLAIR

Amount

NOTE: Schedule 'A' Part - I to Part-XIII are prepriced by MES. Bidders shall insert their lumpsum amount in Green coloured field under col-6 only Lumpsum price worked out by the contractor for "BUILDINGS & STRUCTURES" as listed in Schedule "A" Part – I

Lumpsum price worked out by the contractor for "EXCAVATION, EARTH WORK, SITE CLEARANCE AND LAND DEVELOPMENT" as listed in Schedule "A" Part – II

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule "A" Part – III

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule "A" Part – IV

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule "A" Part – V

Lumpsum price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY" as listed in Schedule "A" Part – VI

Lumpsum price worked out by the contractor for "ROAD / PATH / CULVERT" as listed in Schedule "A" Part – VII

Lumpsum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule "A" Part – VIII

Lumpsum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule "A" Part – IX

Lumpsum price worked out by the contractor for "COMPOUND WALL, FENCING, GATE" as listed in Schedule "A" Part – X

Lumpsum price worked out by the contractor for "RETAINING WALL" as listed in Schedule "A" Part – XI

Lumpsum price worked out by the contractor for "BARRICADING" as listed in Schedule "A" Part – XII

Lumpsum price worked out by the contractor for "COOLING APPLIANCES" as listed in Schedule "A" Part – XIII

Schedule "A" Part - XIV [Miscellaneous Items] [Tenderer has to quote unit rate under Col 6] S & F Robust and high performance LED batten light 4 feet long with lumen output not less than 20 Watts comprising of extruded channel in high thermally conductive material, high translucent serrated milky white diffuser used to get glare free and smooth light distribution including pre wired connection up to tube light fitting with 2 core copper flexible cord of suitable size complete all as specified and as directed.

S & F Robust and high performance LED batten light 2 feet long with lumen output not less than 10 Watts comprising of extruded channel in high thermally conductive material, high translucent serrated milky white diffuser used to get glare free and smooth light distribution including pre wired connection up to tube light fitting with 2 core copper flexible cord of suitable size complete all as specified and as directed.

S & F Robust and high performance LED batten light 2 feet long with lumen output not less than 5 Watts comprising of extruded channel in high thermally conductive material, high translucent serrated milky white diffuser used to get glare free and smooth light distribution including pre wired connection up to tube light fitting with 2 core copper flexible cord of suitable size complete all as specified and as directed.

S & F LED Bulb 9W suitable for fixing in lamp holder

S & F VTPN DB, 6 way, IP-43 metal door, 415 Volts with provision for 125 Amps MCCB as incomer conforming to IS complete all as directed. [Note: MCCB shall be measured and paid seperately]

S & F VTPN DB, 12 way, IP-43 metal door, 415 Volts with provision for 125 Amps MCCB as incomer conforming to IS complete all as directed. [Note: MCCB shall be measured and paid seperately]

S & F MCCB with thermal magnetic release, 4 Pole, 415 Volts, 125 A adjustable type with breaking capacity 16 KA, lcs=100%lcu complete all as directed

S & F MCCB with thermal magnetic release, 4 Pole, 415 Volts, 200 A adjustable type with breaking capacity 25 KA, lcs=100%lcu complete all as directed

M & L for Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by GI earth wire of 4mm dia connected by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4, Type B-1 cover 50mm thick reinforced with 6 Nos 8mm dia TMT bars on both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 15mm dia, earthing lead upto 7.5m complete all as directed]

S & F 15mm bore CP brass bib cock with flange plate screwed for iron pipe or for ferrule and fixed complete all as directed. [Make shall be of 'Jaquar' Queen series Cat No. QQT-7037 or technocommercial equivalent]

S & F 15mm bore CP brass angular stop cock with flange plate screwed for iron pipe or for ferrule and fixed complete all as directed. [Make shall be of 'Jaquar' Queen series Cat No. QQT-7053 or technocommercial equivalent]

S & F 15mm bore CP Two way brass bib cock with flange plate screwed for iron pipe or for ferrule and fixed complete all as directed. [Make shall be of 'Jaquar' Queen series Cat No. QQT-7041 or technocommercial equivalent]

S & F CP wall mixer quarter turn operation with provision of over head shower pipe 115mm long bend pipe including connecting legs complete all as directed. [Make shall be of 'Jaquar' Queen series Cat No. 7273 or technocommercial equivalent]

S & F health faucet with 1500mm long flexible spirochrome tube with wall hook complete all as directed. [Make shall be of 'Jaquar' Cat No. ALD-587 or technocommercial equivalent]

S & F 15mm bore CP cast copper alloy body wall mounted sink cock casted swinging spout complete all as directed. [Make shall be of 'Jaquar' Cat No. LYR-38347S or technocommercial equivalent]

S & F over head shower with arm 114x114mm size square shape with ABS chromium plated body with arm having swivel joint chromium plated complete all as directed. [Make shall be of 'Jaquar' Cat No. EOS-442 or technocommercial equivalent]

S & F 15mm bore CP brass bib cock screwed for iron pipe or for ferrule and fixed complete all as directed. [Make shall be of 'Jaquar' Cat No. LYR-38037 or technocommercial equivalent]

S & F 15mm bore CP Two way brass bib cock screwed for iron pipe or for ferrule and fixed complete all as directed. [Make shall be of 'Jaquar' Cat No. LYR-38041 or technocommercial equivalent]

S & F 15mm bore CP brass angular stop cock screwed for iron pipe or for ferrule and fixed complete all as directed. [Make shall be of 'Jaquar' Cat No. LYR-38053 or technocommercial equivalent]

S & F CP wall mixer quarter turn operation with provision of over head shower pipe 115mm long bend pipe including connecting legs complete all as directed. [Make shall be of 'Jaquar' Cat No. FUS-29273UPR or technocommercial equivalent]. [Note for item Nos. 25 to 35: All fittings / fixtures shall be low flow fixtures certified by GRIHA norms. Product Cal Nos mentioned above shall be suffixed with the appropriate letteers G, GA, GB, GD, GE as applicable]

S & F overhead shower with arm 80mm dia round shape with ABS chromium plated body with arm having swivel joint chromium plated complete all as directed. [Make shall be of 'Jaquar' Cat No. EOS-541RB or technocommercial equivalent]

S & F jet spray with 1m PVC pipe and stainless steel body complete all as directed. [Make shall be of 'Jaquar' Cat No. ALE-547 or technocommercial equivalent]

S & F 15mm bore CP cast copper alloy body concealed stop cock for shower connection complete all as directed. [Make shall be of 'Jaquar' Cat No. TQT-514A or technocommercial equivalent]

Supply, install, testing and commissioning of horizontal type Submersible pump, Electric driven 415 Volts, Three phase, 50 Hz of capacity 350 LPM at 45m head including necessary foundation as required with PCC 1:2:4, type B-1 using 20mm graded stone aggregate common base plate, strainer, electric cable of suitable size and rating and connecting up incoming / outgoing pipes including fixing accessories, etc complete all as directed.

M & L for Construction of masonry valve chamber of size 600X600X750mm internal size, 100mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15mm thick plaster to internal surfaces and external surfaces up to 15cm below ground level in CM 1:6 and top of floor in CM 1:4, finished even and smooth with out using extra cement, 10 SWG thick MS sheet cover including 40mmX40mmX6mm thick MS angle frame fixed in PCC 1:2:4 type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of black bituminious paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50m complete all as specified and directed.

M & L for cutting existing CI pipe line 150mm dia for and including insertion of CI Tee of size 150x150x100mm and specials jointed with lead joints or flanged joints as required at site including necessary excavation and earth work complete all as specified and directed by the Engineer-in-Charge

M & L for cutting existing CI pipe line 100mm dia for and including insertion of CI Tee of size 100x100x50mm and specials jointed with lead joints or flanged joints as required at site including necessary excavation and earth work complete all as specified and directed by the Engineer-in-Charge

Supply, install, testing and commissioning of Silent engine generating set of capacity 25 KVA or nearest available capacity on higher side, with accoustic enclosure as per CPCB IV norms 3 phase 4 wire, 415 Volts, 1500 RPM, 0.8 power factor 50 Hz, AC power supply coupled to alternator mounted on common base plate complete with AMF panel fuel tank, battery and standard accessories and fittings, vibration pads, necessary spares as per manufacturer instructions suitable for ambient condition at coastal area and conforming to condition under latest edition of relevant IS & BS comprising of the following and all as specified:-

(A) Alternator :- Standard design alternator rated at 25 kVA after considering al derating factors as per site conditions at power factor 0.8, AC 3 phase, 4 wire 415 volts 50 cycles, 1500 RPM, self excited self regulated screen protected drip proof IP 23 enclosure brushless design with hub and sealed ball/roller bearing with winding on each pole faces, insulating class 'H' and voltage regulation of + 1% operated voltage from no load to full load. The alternator shall be conforming to BS 2613/5000 and shall be imposition to generate supply with frequency regulation with in + 3% tolerance, revolving field type.

(B) Diesel Engine:- The engine shall be multi cylinder 4 stroke, 1500 RPM coupled with alternator, radiator, water/coolant cooled turbo charged complete with instrument panel, electronic governor, starting battery with lead, exhaust pipe and silencer pipe with suitable insulation by glass wool and aluminium cladding, sfety devices and other standard fitings etc complete as per IS-10000 Part-II 1980 with an overload capacity of 10% for 1 hour after 12 hours continuous running and to produce suitable BHP to generate above capacity complete with standard accessories all as specified and required for safe handling and operation. Salient features of accessories shall be all as specified and directed by the Engineer-in-Charge.

(C) AMF Control Panel:- AMF panel shall be all as specified in Particular specifications and as directed by the Engineer-in-Charge.

Supply, laying & fixing Double wall corrugated (DWC) pipes of 150mm internal dia made of High density Polyurethene (HDPE) with all accessories such as sockets, elbows, bends, end caps and all type of joints complete all as specified and directed

Supply, laying & fixing Double wall corrugated (DWC) pipes of 100mm internal dia made of High density Polyurethene (HDPE) with all accessories such as sockets, elbows, bends, end caps and all type of joints complete all as specified and directed

Supply, laying & fixing Double wall corrugated (DWC) pipes of 75mm internal dia made of High density Polyurethene (HDPE) with all accessories such as sockets, elbows, bends, end caps and all type of joints complete all as specified and directed

Supply, laying & fixing Double wall corrugated (DWC) pipes of 50mm internal dia made of High density Polyurethene (HDPE) with all accessories such as sockets, elbows, bends, end caps and all type of joints complete all as specified and directed

Supply and erecting in true vertical position 7m long mild steel octagonal poles of sheet thickness not less than 3mm with single arms bracket of appropriate size for mounting of street light fitting without flanges with all accessories, pole cap, base plate including necessary provision for housing control gear, fixing with bolts, nuts, washers including 3 runs of sheathed copper cable 1.5 Sqmm PVC insulated FRLS grade of approved colour for phase, neutral and earth from junction box to street light fitting etc including necessary excavation and earth work in any type of soil and provision of PCC foundation of suitable size in PCC 1:2:4, type B-2 and coping in PCC 1:2:4, type B-1 complete all as directed by the Engineer-in-Charge

S & F LED flood light luminairies 45 Watt, 230V, AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistance complete with driver and lamp complete all as specified and as directed.

S & F Post top lantern LED type 25W 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply, install, testing and commissioning of outdoor type LT feeder pillar box made of 3.15mm thick MS sheet fabricated, powder coated after seven tank process, mounted on MS equal angle iron 5mm thick dust and vermin proof with both side openable hinged door and locking arrangement with IP-65 protection including 4 wire copper bus bar of capacity 600 Amps for 3 Phase and 600 Amps for neutral mounted on epoxy insulator and insulation sleeve suitable for phase and neutral, complete wiring and powder coated painting with synthetic enamel paint over a coat of primer fixed on and including PCC 1:3:6 type C-1 coping over PCC 1:4:8, type D2 foundation suitable for accommodating and including the following:- INCOMING: (a) MCCB, 4P, 315 A, 36 KA with microprocessor release - 01 No (b) Electronic/digital energy meter LCD display tamper proof with polycarbonate cover, 415 V, three phase, 10-250 Amps, accuracy class-I, 50 Hz conforming to IS 13779, IP-54 with parameters to show data, time current reading, load PF, voltage and KWH OUTGOING: (a) MCCB 100 Amps, TPN, 16 KA - 05 Nos (b) MCCB 32 Amps, TPN, 16 KA - 04 Nos (c) MCB DP, 32A, 'C' series - 01 No (d) RYB phase indicators with control fuses, Multimeter (e) Digital type Voltmeter (0-500 volts) - 01 No (f) Digital type Ammeter (0-300 Amps) - 01 No

M & L for providing 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe, heater driven by skilled operator on road surface including of road surfaces of all loose dirt, scales, oil grease and foreign materials complete all as specified and directed

M & L for aluminium road stud two way reflective model No. DA 971 of dimension 110x128x29.5mm aluminium alloy body Reflective panel - Amber, Red of white complete all as directed

Supply and laying Double wall corrugated (DWC) pipes of outer dia 175mm and inner dia 147mm made of High density Polyurethene (HDPE) with smooth internal wall & profiles external surface for non pressure for sewade complete all as specified and directed

Supply, fix, install and testing of stainless steel water cooler BEE 5 star rated electric driven (single phase) having approx storage capacity of 80 Lit and nominal cooling capacity of 40 Ltr per hour installed over and including 150mm thick PCC platform of suitable size complete all as specified and directed

S & F in position twin waste bin of 50 Litre capacity each for outdoor made of durable high grade Stainless steel 304 rust proof thickness not less than 0.5mm fixed to frame made of 3 Nos SS vertical pipes of size 38mm dia and 1200mm height interconnected duly fixed with suitable nuts & bolts over plinth protection / apron complete all as directed by the Engineer-in-Charge.

Supply and placing in position Waste bin HDPE body outdoor mobile type of colour Blue / Green with wheels and hinged cover on top of 500 Litre capacity (for Class 'B') each placed in position on the apron / plinth protection complete all as directed by the Engineer-in-Charge. [Note: Twin waste bins shall be placed at the following locations: (i) Type IV Qrs 2 Blocks 2 for Each = 04 Nos (ii) Type III Qrs 1 Block 4 for Each = 04 Nos (iii) Guest House = 02 Nos]

PRASHANTH ERECTOR AND BUILDERS PVT LTD (BID ID -3136340)

P NAIDU (BID ID -3135184)

City Constructie Pvt Ltd (BID ID -3137325)

Hindustan Traders (BID ID -3137276)

surendra infrastructure pvt ltd (BID ID -3144426)

M/S ISLAND REALCON INDIA PVT. LTD (BID ID -3137108)