CONSTRUCTION OF 02 ADDITIONAL TOILET BLOCK WITH EACH BLDGS ADJACENT TO EXISTING CANDIDATE LINE 22 33 SSB OF SCC BHOPAL UNDER GE BHOPAL

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Dismantling of RCC jali of any description or any thickness on wall/boundary wall etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4, complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B1, 1:1.5 :3 (using 20 mm graded stone aggregate) in beam cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per ser item No 6 here-in-before but 6 to 8mm dia in stirrups, spacers and binders all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.with rough finished surface complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exe 0.18 Sqm but not exe 0.38 sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finish in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer of mortar 10 mm thick for laying floor finish in CM 1:4 complete all as specified and directed.

S&F in replacement solid PVC door frame of size 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F in replacement factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail &bottom rail, panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm mild steel solid tube. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F for 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F for 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F for 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 250 mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repairs for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) all as specified and directed.

S&F 15 mm bore wash basin mixer, centre hole for mixing hot & cold water, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F for syphonic action type, PVC low level, flushing cistern 10 ltrs capacity with 32mm dia flush pipe and fixing to supply pipe complete all as specified and directed.

S&F soap dish holder of bootom chrominium plated and glass holer for soap complete all as specified and directed.

S&F chrominium plated, towel rack 600mm long complete all as specifed and directed

S&F chrominium plated, toilet paper holder with stainless steel flap complete all as specified and directed.

M&L in repair 75mm bore, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and direcetd.

S&F for stainless steel overhead square shower of size 150mmx150mm with arm and fixed to 15mm dia pipe complete all as specified and direcetd.

S&F 15 mm angle valve stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed.

S&F 10mm thick corner glass shelf (with bracket) of 10'' radius all as specified and directed

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm long all as specified and directed.

S&F in repairs to 15 mm bib cock, two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and directed.

S&F for 15 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F for 20 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed.

S&F for 4.8 mm thick sheet glass is ground or obscured or frosted, on one side, ordinary quality and glazing with rubber gasket in square not exceeding 0.5 Sqm in each pane for aluminium window, door, ventilator complete all as specified and directed.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces finished even and smooth without using extra cement all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. Note- water proofing compound measured and paid seperately)

M&L for preparation and chalk whitening of newly plastered surface of wall and applying two coats of distemper oil emulsion including a coat of white cement based putty complete all as specified and directed.

M&L preparation of new plastered surface of wall and applying two coat of exterior weather proof water base emulsion paint white/coloured over one coat of white cement based putty (where it is required) all as specified and directed. Note :- Exterior acrylic emulsion paint only should be carried out by any of approved company /firm and authorized applicator The work under this item shall be carried out by the authorized applicator of manufacturer by using modern techniques. The contractor shall also furnish warranty of quality, finish work and effectiveness of painting under this item for a period of 05 years from the date of completion alongwith manufacturerer warranty of material complete all as specified and directed.

M&L for complete removal existing treatment and applying one coats of oil emulsion distemper including one coat of white cement based putty (where it is required) all as specified and directed.

M&L complete removal of old decorated surface of ceiling, including brooming, scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spot sand applying one coat of oil emulsion distemper white/coloured over and one coat of white cement based putty (where it is required) all as specified and directed.

S&F for 75 mm PVC(SWR) pipes, single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.

S&F PVC(SWR) 110mm pipes, single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

&F of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F110 mm PVC(SWR) branch piece, double (double Y) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F PVC(SWR) 110 mm bend bends of any radius and jointed with solvent cement complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in & including non metallic rigid PVC conduit, concealed (ISI marked) medium grade not less than 20mm diameter with all conduit accessories in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on ceiling for fan point only, surface casing capping will be used in lieu of concealed PVC conduit) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, sunken sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of modular fittings like switches, sockets, fan regulators etc. complete all as specified and directed.

All as per ser item No. 5200 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.

All as per ser item No. 5200 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed.

All as per ser item No. 5200 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4 Sqmm and Sqmm as earth wire.complete all as specified and directed.

S&F switch piano flush type 5/6 Amps single pole one way ISI marked all as specified & directed.

S&F socket out let 5 pin 5/6 Amps, ISI marked all as specified and directed.

S&F in switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

S&F of ceiling rose surface bakelite, three terminals, 230 volt AC complete all as specified and as directed.

Supply & fixing LED, tube light complete fitting 20 watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of 1.5 sqmm from ceiling rose comlete all as specified and directed.

Supply and fix DB, SPN, 4 way, double door for MCB, 240 volt with suitable rated bus bar (IP-43) with encosure blank plates for unused all as specified and directed

S&F in repairs MCB, SP, 240 volts, AC supply 6 to 32 amps with over load and short circuit protection and rupturing capacity not less than 10KA 'C' connection with suitable size copper lugs curve including complete all as specified and directed.

S&F of MCB, SPN, 240 volts, AC supply 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA 'C' curve connection with suitable size copper lugs complete all as specified and directed.

S&F of exhaust fan, rust proof steel body, 230 Volts AC, single phase of size 300mm sweep with blades, frame and louvers and all necessary fittings with and including drilling of hole and repair of disturbed surfaces complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 20 mm external diameter and PVC insulated stranded copper conductor of 6.0 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

Deduct Schedule of credit (calculation will be done off line) Rs. 2820.00