Package No.565_2

Demolishing RCC Work manually/by mechanical means including stacking of steel bars and disposal of underviceable material within 50 metres leas as per direction of Engineer-in-charge.

Demolishing brick work manually/by mechnical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.4 In cement mortar.

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A 6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Suspended floors, roofs, landings, balconies and access platform

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources).

Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement: 3 coarse sand).

15mm cement plaster on the rough side of single or half brick wall of mix: 13.2.1 1:4 (1 cement: 4 fine sand).

Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement. 11.6.1 18mm thick

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Acrylic Smooth exterior paint of required shade 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of primer applied @ 2.20 kg/10sqm).

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slury, but excluding the cost of nosing of steps etc. complete. 11.3.1 40mm thick with 20mm nominal size stone aggregate.

Prividing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. fush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm size respectively with authomatic flushing cistern with standard flush pipe and C.P. brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.4.3 Range of three urinal basins with 10 litre whire P.V.C automatic flushing cistern

Providing and fixing wash basin with C.I. brackets 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P. brass pillar taps

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threathed fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.3 25mm nominal outer dia pipes

20mm nominal outer dia pipes

15mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threathed fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge. 18.9.8 80mm nominal dia pipes

100mm nominal inner dia pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Electrical Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1.8.1 Group A

1.8.2 Group B

1.8.3 Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth

Supplying and fixing following modular type switch/ socket on the existing switch box cover connections etc. as required. 1.24.1 5/6 amps switch

1.24.3 15/16 A switch

1.24.4 3 pin 5/6 A socket outlet

1.24.5 6 pin 15/16 A socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.3 4 Module (125mm x 75mm)

1.27.5 8 Module (125mm x 125mm)

1.27.6 12 Module (200mm x 150mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 2.3.3 12 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 2.4.1.4 way (4+12) Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 Single Pole

2.10.3 Double Pole

2.10.5 Triple pole and neutral

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required.

Supplying with including fitting fixing of Ceiling fan etc. as directed by the Deptt.

Supplying with including fitting fixing of 20 Watt LED Tube Light etc. as directed by the Deptt.

Supplying with including fitting fixing of LED Bulb 9Watt etc. as directed by the Deptt.

Supplying with including fitting fixing of Exhaust fan 200mm etc. as directed by the Deptt.

Supplying with installation of testing and commissioning of Hi wall 3 star inverter split type air conditoner of following capacity with cordless remote complete with copper pipe and electrical connection etc. as required and as directed by the department.

Supplying with fitting & fixing of 3 KVA voltage stablizer of following specification complete with necessary electrical connection etc. as required and as directed by the Department. (Microtec/equivalent).

Supplying with fitting & fixing of A.C./Motor starter switch 240V-50Hz complete with necessary electrical connection etc. as required and as directed by the Department. (Orient/Havell/Bajaj Make).

Please Enable Macros to View BoQ information