REPAIR AND REPLACEMENT OF UNDERGROUND CABLE AND ASSOCAITED WORKS AT CERTAIN UNITS UNDER THE JURIDICTION OF GE ARMY JAISALMER

Amount

Taking down the old existing unsv LT Cable of any size etc all as specified and directed.

Supply & laying of XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 95 Sqmm 3.5 Core complete all as specified and directed by Engineer-in-charge.

--- ditto ---- all as per item No. 2.00 above but 70 Sqmm 3.5 Core.

--- ditto ---- all as per item No. 2.00 above but 50 Sqmm 3.5 Core.

--- ditto ---- all as per item No. 2.00 above but 35 Sqmm 3.5 Core.

--- ditto ---- all as per item No. 2.00 above but 25 Sqmm 3.5 Core.

--- ditto ---- all as per item No. 2.00 above but 16 Sqmm 4 Core.

Taking down the old existing unsv HT Cable of any size etc all as specified and directed.

Supply & laying of XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 11000 volts grade 95 Sqmm 3 Core complete all as specified and directed by Engineer-in-charge.

Excavation in trenches in Hard/dense soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/disintegrated soil in any type of soil all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed by Engineer-in-Charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge.(Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.

Taking down old existing LT Pole of any sizeetc all as specified and directed.

Supply and fix steel tubular swaged pols type 410 SP-31 (9.0 meter long) complete with CI base plate and final including foundation and coping complete all as directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40mm grade stone aggregate in foundation of pole/struts etc including necessary form work all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete (1:3:6) type C-2 using 40mm grade stone aggregate in foundation of stay assembly/pole including necessary form work all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete (1:2:4) type B-1 using 20mm grade stone aggregate for couping/encasing around of pole including necessary form work finished een and smooth without using extra cement all as specified and directed by Engineer-in-Charge.

Taking down old existing unsv MCCBs of any capacity etc all as specified and directed.

S&F MCCB, 63 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and Engineer-in- Charge.Note: ICS = ICU 100%.(Make:- Legrand/ABB/Siemens).

S&FMCCB, 100 Amps, four pole,16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge.Note: ICS = ICU 100%.(Make:- Legrand/ABB/Siemens).

S&F MCCB, 160 Amps, four pole, 16 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge.Note: ICS = ICU 100%.(Make:-Legrand/ABB/Siemens).

S&F MCCB, 200 Amps, four pole, 25 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge.Note: ICS = ICU 100%.(Make:- Legrand/ABB/Siemens).

S&F MCCB, 250 Amps, four pole, 35 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge.Note: ICS = ICU 100%.(Make:- Legrand/ABB/Siemens).

S&F MCCB, 400 Amps, four pole, 35 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge.Note: ICS = ICU 100%.(Make:- Legrand/ABB/Siemens).

S&F MCCB, 630 Amps, four pole, 35 KA, 415 volt with fixed thermal maganetic release all as specified and directed by Engineer-in- Charge.Note: ICS = ICU 100%.(Make:-Legrand/ABB/Siemens).

Taking down old existing unsv GI Pipe of any size etc all as specified and directed.

S&F GI pipe light grade of dia 50 mm laying in road and along with poles for cable protection complete including taking down old pipe all as directed byEngineer-in-Charge.(Make :- Jindal/Tata/Prakash Surya).

------ ditto ----- all as per item No. 29 above but size 80mm dia.(Make :- Jindal/Tata/Prakash Surya).

------ ditto ----- all as per item No. 29 above but size 100mm dia.(Make :- Jindal/Tata/Prakash Surya).

Labour for felling of tree exc 30 cm and n exc 100 cm girth including cutting of trunk and branches and shacking of serviceable material and disposal of unserviceable material to a distance n exc 50 m and cearing site all as specified and directed by Engineer-in-Charge.

Taking down old broken cable eoute indicator of any type etc all as specified and directed.

S & F HT cable route indicator made out of cast iron plate of 150 mm dia 4 thick having embosed wiriting HT cable fixed on MS angle iron 30x30x5 mm of 900 mm long with two nuts,bolts and grouting 500 mm length under ground and splitted and bent to shape and embedded in ground with PCC (15 cmx 15cm x 15 cm complete all as specified and directed.

S & F LT cable route indicator made out of cast iron plate of 150 mm dia 4 thick having embosed wiriting LT cable fixed on MS angle iron 30x30x5 mm of 900 mm long with two nuts,bolts and grouting 500 mm length under ground and splitted and bent to shape and embedded in ground with PCC (15 cmx 15cm x 15 cm complete all as specified and directed.

Taking down old unserviceable earthing etc all as specified and directed.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground levl connected to galvanized iron strip 32 x 6 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete with funnel, earthing chamber and earthing lid cover all as specified and directed.(Make : Electro Control System, Universal Panel, Ramp).

Taking down old unserviceable test point terminal block etc all as specified and directed.

M&L for test point terminal block made of gun metal or phosphprous bronze size 75x75x25mm, dirrled and screwed including 3 Noos , 8mm dia 25mm long hex, head screw complete all as spcified and directed by Engineer-in Charge.

Taking down old unserviceable LT Panel of any size etc all as specified and directed.

M&L Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing materialand accessories suitable for 3 core XLPEarmoured aluminium conductor cable of 95 Sqmm.Make: Denson, Reychem,3M

M&L Cable jointing kit for 11 KV (Earthed) gradecable for straight through heat shrink typejoint complete with jointing material andaccessories suitable for 3 core XLPEarmoured aluminium conductor cable of size 95 Sqmm.Make: Denson, Reychem,3M size

Supply, installation, commissioning and testing of LT FP box (CPRI Approved) outdoor type 415 Volts, 50 Hz, 3 Phase 4 wire supply Padastal mounted double door center opening with lockng arrangement , factory assembled,CPRI approved, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 3.15 mm thick CRCA sheet for individual hinged type door for MCCBs , powder coated and supported on 50 mm x 50 mm x 6 mm angle iron frame and 3.15 mm thick MS rubber beading , complete to accommodate including the following:-

Supply, installation, commissioning and testing of LT FP box (CPRI Approved) outdoor type 415 Volts, 50 Hz, 3 Phase 4 wire supply Padastal mounted double door center opening with lockng arrangement , factory assembled,CPRI approved, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 3.15 mm thick CRCA sheet for individual hinged type door for MCCBs , powder coated and supported on 50 mm x 50 mm x 6 mm angle iron frame and 3.15 mm thick MS rubber beading , complete to accommodate including the following:-

(a) Bus bar chamber comprising 4 Nos Aluminum strip bus bars air insulated and PVC sheathed capacity 400 Amps with colour coding in separate sheet steel enclosure.(set of four) (b) MCCB 415 Volts, 330 Amp rating 4 pole, Capacity 16 kA -01 No (Incoming) (c) MCCB 415 Volts, 250 Amp rating 4 pole, Capacity 16 kA -04 Nos (d) MCCB 415 Volts, 160 Amp rating 4 pole, Capacity 16 kA -04 Nos (e) MCB 415 volts, 40 Amp, rating 4 Pole (triple pole and neutral), Capacity 16 KA - 02 Nos (f) MCB 240 Volts, 40 Amp rating 2 pole, Capacity 10 kA -05 No (Outgoing) (g) LED type/Neon type indicating lamps panel mounting type RYB -3 Nos. (h) S&F danger notice plate 1.6 mm thick MS sheet of size 20 x15 cm-01 No (j) Platform for the feeder pillar board with PCC (1:2:4) work

M/S SIDHU CONSTRUCTION COMPANY

M/s Yash Electrical and Maintenance

star electricals

S S enterprises

S R ENTERPRISES

M/S PRASHANT BENIWAL

M/s Shree Construction Company