Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹48.4 L+₹1.1 L (2.29%)Rejected-Finance D K CITY C 42 MINNIEBAY POST BOX NO 340 HPO PORT BLAIR 744 103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹49.3 L+₹1.9 L (4.03%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹50.9 L+₹3.6 L (7.59%)Rejected-Finance NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹51.4 L+₹4.1 L (8.59%)Rejected-Finance 956 2 CHANDERSEKER ENTERPRISE OPP MARICAR HOSPITAL OLD CCS JUNGLIGHAT SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
21 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Brichgunj
Garrison Engineer Brichgunj Port Blair 744 103
SPECIAL REAPIR TO BLDG NO P440 and P19 AND OTHER LBW WORKS UNDER GE BRICHGUNJ PORT BLAIR
2023_MES_611597_1
8384A
Open Tender
Civil Works
Item Rate
180 days
Brichgunj
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer Brichgunj
₹96,000
Yes
14 Sept 2023
2 Aug 2023
23 Aug 2023
2 Aug 2023
21 Aug 2023
16 Aug 2023
Amount
Rough excavation n. excn. 1.5m deep and getting out any type of soil (soft /loose Soil and Hard/dense soil)
Rough excavation excn. 1.5m & n.exc 3.0 m deep and getting out Hard/dense soil
Rough excavation excn. 3.0 m & n.exc 4.5 m deep and getting out Hard/dense soil
Excavation over areas n exc. 1.5m deep and getting out Hard dense soil
Excavation in trencehes n.exc 1.50 m wide and exc 1.50 m and n.exc 3.0 mdeep and getting out in hard/dense soil
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out (a) Soft/loose Soil
M & L for cement concrete 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in foundation, filling mass concrete all as specified and as directed.
M & L for RCC M-30 design mix concrete (using 20 mm graded stone aggretate) as in foundations incl rafts, footings and mass concrete
M & L for RCC M-30 design mix concrete (using 20 mm graded stone aggretate) as in retaining walls and the like any thickness above top of footing including attached pillesters and butteresses all as specified
M&L for use and removal of steel form work to sides of concrete foundations, footings,rafts and raft beams sides and soffits of foundation and plinth beams and similar work for flat surface all as specified
M&L for use and removal of steel form work to faces of walls retaining walls, abutments, parapets and like for flat rough fineshed surface all as specifiedside
M&L for use and removal of steel form work to faces of walls retaining walls, abutments, parapets and like for flat fair fineshed surface all as specifiedside
S&F TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than .9mm dia all as specified
M&L for broken stone or boulders including hand packing (any thickness) at back side of weep holes and raising or lowering to the required level all as specified.
M&L for 110 mm bore PVC pipes as in weep holes all as specified.
Return filling in Surplus soil, back filling of retaining wall including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified.
Removing excavated soil exc 50 m but n.exc 250 m and depositing where directed at level n.exc 1.50 m above the atarting point
Demolition of PCC Solid block masonry built in cement mortar of any descrption.
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI baesd plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M & L for water proofing treatment with the following specifications including taking down existing roof treatment including cement screed/plaster of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Rendering 10mm thick in CM 1:4 on fair faces of brick or concrete wall surfaces finished smooth and even mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instructions complete all as specified and as directed by Engineer - in -Charge. (Note:- Water proofing compound shall be measured and paid separately) (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying Aquashield membrane weighing 3to 4Kg/sqm, with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iii) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.
S&F as in repairs aluminium anodised snap grid frame work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle for false ceiling and suspended with 6mm dia GI wire, hooked to roof with needful adjustement up to 1200mm long by means of ceiling cleats made out of GI Flat 40 X 3mm 60mm long and expansion holdfasteners 12.5mm dia 40mm long, including dismantling celing board of any description and any type fixed to the aluminium frame work with screws or nails etc complete all as specified and as directed by Engineer -in-Charge.
Fixing only in repairs Eco board 600 X 600 X 4mm thick decorative type fixed to the aluminium frame work with screws or nails etc including two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer -in-Charge. Note :- Eco Boards obtained from dismantling be re-used
S&F Eco board 600 X 600 X 4mm thick decorative type fixed to the aluminium frame work with screws or nails etc including two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer -in-Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
S & F coloured joint free non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, all as specified and directed.
S & F coloured glazed ceramic tiles 450 mm x 300mm x 7mm to 8mm thick on vertical surfaces such as skirting & dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces etc including backing coat of 10mm thick CM 1:3.
M & L for machine cut kota stone slab 20 to 25mm thick in treads of steps in stair laid and jointed with white cement slurry mixed with pigments to match the shade of the slab incl rubbing and mirror polishing laid over cement screed bed in cement mortar 1:4, 20mm thick, complete all as directed
M & L for machine cut kota stone slab 20 to 25mm thick in rise/steps, skirting, dado and pillar laid and jointed with white cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing laid over cement screed bed in cement mortar 1:3, 10mm thick, complete all as directed
M & L for granite slab 20 mm thick as in cooking platforms, bedded 20mm thick ,in cement mortor 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed by Engineer-in-charge
Material & labour for designer coloured chequred cement concrete tiles of size 20cm x 20cm x 25mm with jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4) all as specified and directed.
Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.
M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of block masontry even and smooth eithout using extra cement.(WPC shall be added in only 5mm thick top layer of plaster @ 2% of cement content)
Supply only integral water proofing compound
M&L for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm.
M & L for two coats of OBD over a coat of primer on newly plastered surfaces of walls including nesessary preparation of surfaces all as specified and directed.
M&L for two coats of weather coat(Exterior) all guard emulsion, any colour/tined to new wall surfaces over a coat of primer including necessary preparation of wall surfaces.
M & L for two coats of OBD over a coat of primer on newly plastered surfaces of ceiling including nesessary preparation of surfaces all as specified and directed.
M & L for preparing old decorated surfaces of ceiling and applying two coats of OBD over a coat of primer all as specified and directed.
M & L for two coats of OBD over a coat of primer on old plastered surfaces of walls including nesessary preparation of surfaces all as specified and directed.
M&L for two coats of weather coat(Exterior) all guard emulsion, any colour/tined over a coat of primer.including complete removal of old treated wall surfaces.
M&L for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) all as specified and as directed
All as per Item No.45 here in before but are exc 1.5 Sqm but n.exc 4.00 Sqm.
S & F Powder coated Aluminium section (minimum coating is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).
Supply only 12 mm thick Prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.
Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each panel complete all as specified and as directed by Engineer-in-charge.
Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.
Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge.
S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.
S&F in repairs 75mm Size Butt hinges type C-21 , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed
S&F in repairs 100mm Size Butt hinges type B-21 , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed
S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section.
S & F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section.
S & F in repairs 100 mm long Aluminium, anodised, barrel tower bolts of extruded section.
S&F in repairs Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S & F in repairs100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
Supply & Fix in repairs 140mm long door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer -in-Charge.
Taking up or down 20mm dia bore steel tubing galvanised and connections complete all as specified and directed.
Taking up or down 15mm dia bore steel tubing galvanised and connections complete all as specified and directed.
Supply and laying 20mm external dia UPVC pipes SDR11 including Plain UPVC fittings SDR11 mean fittings which do not have any metal component and is jointed with CPVC solvent cement only (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End plugs, etc) & Special fittings include CPVC Brass fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor, etc), Unions, Ball valves, Flange and tank adaptor as on walls/ceiling/floors complete all as specified and as directed by Engineer-in-charge.
All as per item no 65.00 here in before but 25mm.
S&F in repair 20mm dia Gun metal globe or gate valve with iron wheel head, screwed both end for iron pipe.
S&F for 25mm dia ball brass valves, high pressure, with polythen float and flynut complete, screwed for iron pipe or brass ferrule .
S & F PVC flushing cistern 10 litres capacity syphonic action type, low level, white with inlet, ball valve, float, handle and flush pipe, etc complete all as specified and directed.
S&F in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Bib tap, cast copper alloy chromium plated,15 mm dia with fancy type screwed down for iron pipes or brass ferule etc, complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs angular stop cock, cast copper alloy chromium plated, 15 mm dia screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge.
All as per item no 72.00 here in before but fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs fancy type, Pillar taps , cast copper alloy , with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm and fixed in repairs, all as specified.
S & F in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug washers and waste fittings, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair vitreous china wash hand basin white flat back size 630x450mm incl brackets, PTMT coupling, 32 mm GI pipe waste pipe complete all as specified.
S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge
S&F PVC connection both end brass union 15 mm dia & check nuts of length 450 mm long.
S & F in repairs vitreous china squatting pan, Orissa pattern size 630X450 mm white with integral foot rest (excluding flushing cistern) including 'P' or 'S' trap etc complete all as directed.
Disconnecting of existing tank of capacity 500 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge.
S & F rotational moulded polythelene water storage tanks ISI marked (cylindrical vertical with closed top) of 500 Ltrs capacity with tank cover (top), hoisted and fixed in position, including taking down existing with all connections complete all as specified and as directed by Engineer -in-Charge.
Dismantling of CI drain pipes,50-100 mm dia jointed in cement mortar including all fittings joints etc complete all as specified and directed.
M&L for PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints, fixed to wall incl testing of pipe etc complete all as specified and directed by Engr-in-Charge
All as per item no 85.00 here in before but 75mm bore of pipe all as specified and directed.
M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm outer dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
Supply and fix PVC (SWR) bends 110mm bore with oval access doors all as specified and directed.
Supply and fix PVC (SWR) bends 75mm bore with oval access doors all as specified and directed.
Supply and fix PVC (SWR) junction single, (Single T) 110mm bore, equal or unequal with oval access doors all as specified and directed.
All as per item no 90.00 here in before but but 75mm bore of pipe all as specified and directed.
Supply and fix PVC (SWR) branch piece, single (single Y) equal or unequal110mm bore, equal or unequal with oval access doors all as specified and directed.
All as per item no 92.00 here in before but 75mm bore of pipe all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.
M&L for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 100mm thick as in plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed.
M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and as directed by Engineer -in-Charge.
M&L for application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement), complete all as specified and as directed by Engineer -in-Charge.
M&L for removing loose and broken concrete by chiselling, /picking etc upto a depth of 50 to 80mm from column/ beams and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and directed.
M&L for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge.
M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufacture’s instruction to old concrete surfaces of columns, beams and similar structural members all as specified and as directed. Make: fosroc/ bostik/ STP
M&L for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate : 25 Kg Renderoc RG) respectively (as per manufacturer’s instruction) laid in average thickness 80 to 100 mm in surface, including necessary watertight form work complete all as specified and directed. Make: fosroc/ bostik/ STP
M&L for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces complete all as specified and directed. Make : Concure WB white of Fosroc or equivaent in bostik /STP
M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips
Mild steel TMT bars 6 to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips
Demolition of precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc
M & L for Pre-cast PCC block masonry type B-1 (1:2:4) with solid block and set in CM1:6
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.
M&L for precast cement concrete masonry in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, n.exc. 10cm in width setting in CM 1:6 complete all as specified and as directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors finished with grey cement and no pigment including 25mm thick screed bed in CM 1:6 all as specified and as directed.
Taking down carefully aluminium point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed.
M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, etc., all as specified and as directed for one light point controlled by one one way switch.
All as per item No. 111.00 here - in - before but for 5 Amps switch socket point on the same board controlled by one switch complete all as specified and directed.
All as per item No. 111.00 here in before but for 3 pin switch socket outlet point 5 amps on independent board complete all as specified and as directed.
Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed.
Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed.
All as per item No 2 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed.
Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed.
Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed.
Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.
S&F 36 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.
S & F LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 100 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair metal enclosure distribution board SPN, 4 way 240 volts, with 100 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as specified and as directed by Engineer-in-Charge.
Supply and fix MCB single pole 240 volts, 5 to 32 amps, all as specified and as directed.
Supply and fix MCB SPN 240 volts, 5 to 32 amps, all as specified and as directed.
Taking down old unserviceable exhaust fan 300/380 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs for rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 4.0 mfd - 01 No and bearing including scrapping of old paint and applying two coats of synthetic enamelled grey paint over a coat of red oxide primer complete and refixing back at site complete all as directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I
Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 C x 10 sq mm
Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.
Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and directed
Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed
M&L for cutting existing 40mm GI line and making branch connection of 25 mm dia GI line including fittings required for connection complete all as specified and directed
Supply and fix 25 mm bore Gun Metal gate valve with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specifed and directed
Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 1000 Litre cap etc complete all as specified and directed.
M/S KHUSHICONSTRUCTION
Vandana Enterprises
SKV Engineering
CHANDER SEKER ENTERPRISE
Bismi Builders & Enterprises
ANITA VARMA ENTERPRISES
Nirman Construction Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .