PROVN OF PATHWAY ALONG BOTH SIDE OF ROAD FROM SANJOG CHETRI VIHAR GATE TO GGS MARG AND PROVN OF TOILET BLOCK NEAR BLDG. NO. T-9 (OR LIVING ACCOMODATION) WORK UNDER GE (EAST) LUCKNOW

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded agg) in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns; etc; basement slabs; under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded agg) in columns, pillars piers post and struts complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded agg) in beams, cantilevers, bressummers; lintels over 1.5m span complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3, Type A1 (using 20mm graded agg) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to sides of square columns and roughly finished surface complete all as specified and directed.

M&L for form work to soffits of roof slabs, floor slabs and similar work not exc 200 mm thick fair finished surfaces (flat), complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, , breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide, complete all as specified and directed.

M&L for formwork to sides & soffits of floor or roof beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. complete all as specified and directed.

M&L for mild steel TMT or twisted bars 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

All as per item No 13 above but mild steel deformed or twisted bar 6mm to 8 mm dia.

All as per item 13 but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Dismantling interlocking tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 ( using 40mm graded agg) as in sub base of floor complete all as specified and directed.

M&L for sand filling under floors etc complete incl watering & well ramming complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8, as in sub base to floor complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 as in cills, steps; seismic and other similar bands, copings, kneelers, apex stones, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed.

Providing precast RCC using 20mm graded aggregate as in cover slab for man holes and similar articles with plain faces and set in CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in sub base of floors, finished the surface even and rough complete all as specified and directed.

M&L for non skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incudingl with motif/borders as in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles coloured in vertical surface 600x300x7-8mm thick set and jointed in neat cement slurry and pointed with white cement to match incl with motif/borders as in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L PCC tiles coloured rubber moulded Paver block any shape and size conforming to IS 15658-2006 of 80mm thickness,M-40 grade approved design /colour set and bedded over and including 25mm thick coarse sand laid over compacted sub soil all as specified and directed.

All as per item No 30 above but except paver block. (Note: Old paver blocks shall be used obtained from dismantling)

M&L for hardcore broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using cement concrete 1:3:6 type C1 (20 mm stone agg) complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with construction joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for 150mm dia SGSW pipes grade'A' laid in trenches and jointed in CM 1:1 complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or on concrete surfaces in CM 1:6 finished fair and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces as ceiling in CM 1:3 finished fair and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on otherthan fair faces of brick work or on concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified.

M&L for three coats of white wash on walls including preparation to newly plastered surfaces preparation to newly plastered surfaces complete all as specified and directed.

M&L for three coats of white wash on ceiling including preparation to newly plastered surfaces preparation to newly plastered surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation the new plastered surface of wall including cornices etc and applying two coats of cement base paint (any colour as approved) complete all as specified and directed.

S&F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S&F factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement , supply and fixing in the frame complete all as specified and directed.

S&F for 100mm long, SS butt hinges, extruded, anodized and fixed, type B-21 complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S&F steel windows or ventilators partly fixed and partly top hung with glazing bars complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth over and including one coat of red oxide primer including necessary preparation complete all as specified and directed

S&F 3mm thick sheet glass Pin headed and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F in repair vitrious china squatting pan orissa pattern size 580x440mm white with P or S trap and making good floor complete all as specified and directed.

S&F PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and directed

S&F vitreous china wash basin, white flat back size 580 x 450 mm including 15mm dia cromium plated pillar tap, waste chain, chain/plug and porcelain stopper but including brackets complete all as specified and directed

S&F Vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ) including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed.

S&F PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed.

S&F for bib taps 15mm, chromium plated, fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed

S&F stop/angle valves, 15mm chromium plated, fancy type, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 15mm dia, fixed complete all as specified and directed

S&F for superior quality CP towel rail 20 mm dia, 'D' Type 600mm long between flanges complete all as specified and directed.

M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in wall complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to trenches, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 100 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed.

S&F PVC (SWR) vent cowl suitable for 100mm bore of pipe complete all as specified and directed.

S&F 75 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal with access door complete all as specified and directed

S&F grating dome 100mm dia of stainless steel complete all as specified and directed.

M&L Salt glazed stoneware gully traps of 100x100mm size, square or round mouthed, type‘P’ complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm PTMT ball valve with polythene float and fly nut complete all as specified and directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

S&F for 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M&L for connecting 25 mm bore GI pipe from existing water supply line including necessary excavation , clamping making holes to existing pipe line

S&F 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L for 50 users septic tanks, excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4, RCC slab covers including RCC precast manhole covers having 6mm plate embeded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc complete all as specified & as shown in Drg No TD/217 sheet No 1/2 & 2/2.

M&L for soakage well excavation in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete including intercepting chamber, screen chamber, brick work in CM 1:4, RCC cover slab in M25, filling with brick bats, size of soak well 2.4 m dia x 4.5 m effective depth all as specified & as shown on Drg No . TD/576 sheet 1/2 & 2/2

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one switch.

All as per serial item No 79 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

S&F switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

S&F socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

S&F LED bulb 9 Watt B 22 CDL all as specified and directed. Make:- Havells/Bajaj/Philips/Crompton

S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

S&F single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,Philips cat no TMC 501P1XT-LED22W P 3241

S&F exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexible wire 23/0.076 mm all as specified and directed. Make/Model:- Havells Turbo Force SP / Almonard 300 mm Heavy Duty/Bajaj Maxx Air

S&F LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Crompton/Havells/ philips/Bajaj

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall complete all as specified & directed.

S&F sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F MCB, DP, AC, 240 volt of 32-40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall all as specified & directed.

S&F stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 50 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed. Make: Racold/Jaquar/Havells/Bajaj/Crompton

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 10 Sq mm 2 core size in trenches, on wall, road crossing through protection pipe etc. complete all as specified and directed.

Providing sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Supply and laying 40 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection.

Supply and laying common burned clay bricks sub class B designation of old size bricks.

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part I - 2009 and connected to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.