WBPWD/EE/PMED/NIQ-08/e-Q /2024-2025

Amount

Supply of 9 Mtr. Octagonal Poles in 3mm shaft thickness with Top A/F 70 mm, Bottom A/F 130 mm , Base Plate 200x200x16 mm suitable for wind speed 180 Km/hr. as per IS:875 with suitable bracket arrangement to install 1 or 2 no. Led Steet Light A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 C) Galvanization as per BSEN ISO:1461 Make – Bajaj/ Valmont/ Transrail/ crompton/ Bansal)

Supply of 4 Nos. M20X600 “J” Type foundation bolts as per EN-8 Grade (TS-600) manufactured from special steel along with nuts, washers, and templates for 9 Mtr. Pole

Onstruction of suitable Shallow foundation upto 10mtr. Octagonal Pole with M-20 grade concrete for Pole considering soil bearing capacity (SBC) 10T/sq. mtr. at 2 Mtr. depth with all materials and labour payment made as per PWD civil schedule & as per direction of EIC. Erection of Pole by using of lifting equipment like hydra etc. and fixing of foundation bolts , anchor plate etc. with necessary arrangement & Testing & commissioning of all electrical equipment of Pole like led fixtures, MCBs Terminal etc. with necessary connection.

Supply of 1.5 Mtr. Galvanized Decorative Sword Type single Arm Bracket made of MS pipe as per IS:1161 along with 1 No. FRP Dome & 2 No. FRP Ball (Make-CG/Bansal/Utkars/Bajaj/ Transrail)

Supply of 1.5 Mtr. Galvanized Decorative Sword Type Double Arm Bracket made of MS pipe as per IS:1161 along with 1 No. FRP Dome & 2 No. FRP Ball (Make-CG/Bansal/Utkars/Bajaj/ Transrail)

Supply and Delivery of following size 1.1 kv grade XLPE insulated aluminium armoured cable. (Make- RR Kable/KEI/ Gloster/ Policab/ Havells)

a) 4 core 25 sq. mm. cable

b) 2 core 10 sq. mm. cable

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for following XLPE/PVC armoured cable.

a) 4 core 25 sq. mm. cable

b) 4 core 10 sq. mm. cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

a) 4 core 25 sq. mm. cable

b) 4 core 10 sq. mm. cable

Supplying and Drawing of 2 x 22/0.3 (1.5 sqmm) 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire and making necy. connection as required)(Make- RR Kable/KEI/ Gloster/ Policab/ Havells) (For disrtibution)

Supplying and Drawing of 19 mm heavy gauge polythene pipe(Brand approved by EIC) and making necy. connection as required.

Supply & fixing of 240V, 120 W, IP 66 Pressure die cast housing with toughned glass,Luminaire efficacy of > 140 lm/W, with secondary optics for better light distribution for Street Light fitting complete with all accessories for five years warranty from OEM. to be fixed on new otagonal pole incl necessary arrangement,incl all accessories. (Make- Philips, cat no- ( Make Philips, Cat No- BRP503 LED168 CW R3C PSU S1/ Crompton/ Wipro/ Bajaj)

Supply & Laying of 40 mm did 3 mm thick, high quality PVC polythine pipe For Underground Cable (Make as per EIC) to cable entry in the RCC foundation.

Supply & Errection of suitable size(dept 800 mm) out door type both side openning sheet steel piller box of 3.15 mm thick CRCA sheet with trapezium top cover (5mm thick) with ventillation arrangement with both side door arrangement hinged type , with mechanical locking arrangement and in built handle pcc and brick foundation of 20inch with plaster with net cement finishing etc. with central hollow with filling of fine sand at height of 4.5 feet from GL and below 1.5 ft on PCC (4inch thickness) on sand filling (6inch thickness) piller box should have two coat of synthetic enamel paint powder coat RO primer with mechanical locking arrangement, with pad lock arrangement also including providing of godrej brass make/ weather proof lock and key( 3nos Key with it including 2 no earthing terminalon it . the piller box should be two part type ( front and back side openning) with compressing of the folowing. A) Incommer: i) S&F 415 V, 63 A TPN SFU in Sheet steel enclosure with 3 nos HRC type fuse (Make: L&T/ Schneider/ Siemens) --1No ii) S& F of 415V, 63A , TP power contactor (Make: L&T/ Schneider/ Siemens) --1No iii) S&F of 24 hour analog time switch (Make: L&T/ Schneider/ Siemens) --1No B) Busbar: 415V, 200A 4x20x5 mm copper bar as BBC in 16 SWG MS Sheet enclosure as per GS--1 set C) OUTGOING: i) 415V, 32 Amp TPN SFU in shhet steel enclosure with 3 nos HRC type fuse. make: (L&T,Schneider/ Siemens) ---3 nos D) Reading arrangement : i)0-500 V, 92mm x 92mm square typr digital voltmeter(L&T Make)--1no ii) 0-63 Amp 92mm x 92mm square type digital Ammeter (L&T Make) --1no iii) 63/5 Amp CT coil kappa make---3 nos v) LED type indicating lamp(RYB)--3 nos vi) 6amp TP MCB--1no vii) S&F of Danger board--1no

Supply & delivery of LED Flood light of following specification: a) 300 W for each set (Maximum). b) System Efficacy of the Luminaries should have minimum 36000 lumens & color temperature: 5700K (+/-)300K, more than 50,000 hrs of life span for LED. c) The fixture shall have Ingress Protection of IP 66 Rating for both for Optical & Electrical Compartments. d) Luminaries should consist of Universal Voltage Driver to handle wide operating voltage range from 120-270V AC and frequency range of 50+/-3% Hz. e) Driver shall have high efficiency and have inbuilt safety features like over voltage , short circuit , over load , thermal protection and reverse polarity protection. f) Surge protection : 10KV. g) Luminaries should be powder coated and housed in a single piece Pressure die cast non-corrosive Aluminium alloy enclosure with optimal fins for Heat Sink Mechanism. h) Rated Operating Temperature should be 0 deg to +55 deg C with a relative humidity of 10-95% RH. i) Luminaries shall have five (5) years replacement warranty period from actual date of completion of work including driver/control gear, LED etc. (Make & Model No .:Philips - BVP284 LED360 CW FG SY5NB 300W PSU SPD/ Bajaj/ Crompton/ Wipro)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI medium GI pipe---125 nos for pole, 4 nos for feeder pilar box and 16 nos for High Mast Light

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. For solid 4 SWG GI wire.

Excavation of soil for installation of Earth Electrode and filling & ramming. (For morrum soil)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

a) 40 mm dia

b) 50 mm dia

Painting upto 5 mtr hight city butification pipe pole with two arm by two coats of aluminium paint over one coat of RO primer as per direction of the EIC.

Supply & Fixing of 25W, IP65 post top lantern with symmetric light distribution having 10 KV SPD is provisioned inside lumininaire. (Philips, Cat No- BGP200 LED26 CW PSU GR CPC SPD/ Crompton/ Wipro)

Supply & wrapping of LED strip light of 50 mtr length (White & Blue) (make philips model marathon rope light)

S & F of driver for LED strip ligth (Make- philips)

KORUNAMOYEE ENTERPRISE (BID ID -5690130)

ELCON ENGINEERS (BID ID -5689464)